/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Kingston SSDNow UV400/500 Device Model: KINGSTON SUV400S37240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 0C3G37R5 User Capacity: 240,057,409,536 bytes [240 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Oct 31 20:04:09 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 5) minutes. Conveyance self-test routine recommended polling time: ( 0) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 48 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 1839 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 4877 12 Power_Cycle_Count -O--CK 100 100 000 - 1349 100 Unknown_Kingston_Attr -O--CK 100 100 000 - 6813264 101 Unknown_Kingston_Attr -O--CK 100 100 000 - 922992 170 Reserved_Block_Count -O--CK 100 100 000 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 137 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 177 Wear_Leveling_Count -O--CK 092 092 000 - 2957 178 Used_Rsvd_Blk_Cnt_Chip -O---- 100 100 000 - 0 180 Unused_Rsvd_Blk_Cnt_Tot -O---- 100 100 000 - 792 183 Runtime_Bad_Block -O--CK 094 094 000 - 31 187 Reported_Uncorrect PO--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 029 100 000 - 29 (Min/Max 13/49) 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 1839 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 201 Unc_Read_Error_Rate -O--CK 100 100 000 - 0 204 Soft_ECC_Correction -O--CK 100 100 000 - 1839 231 SSD_Life_Left -O--CK 092 092 000 - 8 233 Media_Wearout_Indicator -O--CK 100 100 000 - 17843 234 Unknown_Attribute -O--CK 100 100 000 - 7950 241 Host_Writes_GiB -O--CK 100 100 000 - 11797 242 Host_Reads_GiB -O--CK 100 100 000 - 8140 250 Read_Retry_Count -O--CK 100 100 000 - 12699 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 5 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 9 Device vendor specific log 0xab SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 23/29 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (309) Index Estimated Time Temperature Celsius 310 2020-10-31 12:07 32 ************* ... ..( 42 skipped). .. ************* 353 2020-10-31 12:50 32 ************* 354 2020-10-31 12:51 31 ************ ... ..( 15 skipped). .. ************ 370 2020-10-31 13:07 31 ************ 371 2020-10-31 13:08 ? - 372 2020-10-31 13:09 23 **** 373 2020-10-31 13:10 24 ***** 374 2020-10-31 13:11 24 ***** 375 2020-10-31 13:12 25 ****** 376 2020-10-31 13:13 25 ****** 377 2020-10-31 13:14 26 ******* 378 2020-10-31 13:15 26 ******* 379 2020-10-31 13:16 26 ******* 380 2020-10-31 13:17 27 ******** ... ..( 2 skipped). .. ******** 383 2020-10-31 13:20 27 ******** 384 2020-10-31 13:21 28 ********* ... ..( 3 skipped). .. ********* 388 2020-10-31 13:25 28 ********* 389 2020-10-31 13:26 29 ********** ... ..( 3 skipped). .. ********** 393 2020-10-31 13:30 29 ********** 394 2020-10-31 13:31 30 *********** ... ..( 5 skipped). .. *********** 400 2020-10-31 13:37 30 *********** 401 2020-10-31 13:38 31 ************ ... ..( 21 skipped). .. ************ 423 2020-10-31 14:00 31 ************ 424 2020-10-31 14:01 ? - 425 2020-10-31 14:02 23 **** 426 2020-10-31 14:03 24 ***** 427 2020-10-31 14:04 25 ****** 428 2020-10-31 14:05 25 ****** 429 2020-10-31 14:06 26 ******* 430 2020-10-31 14:07 26 ******* 431 2020-10-31 14:08 27 ******** 432 2020-10-31 14:09 27 ******** 433 2020-10-31 14:10 27 ******** 434 2020-10-31 14:11 ? - 435 2020-10-31 14:12 27 ******** 436 2020-10-31 14:13 28 ********* ... ..( 6 skipped). .. ********* 443 2020-10-31 14:20 28 ********* 444 2020-10-31 14:21 29 ********** ... ..( 61 skipped). .. ********** 28 2020-10-31 15:23 29 ********** 29 2020-10-31 15:24 30 *********** 30 2020-10-31 15:25 29 ********** 31 2020-10-31 15:26 29 ********** 32 2020-10-31 15:27 30 *********** 33 2020-10-31 15:28 30 *********** 34 2020-10-31 15:29 30 *********** 35 2020-10-31 15:30 29 ********** 36 2020-10-31 15:31 30 *********** 37 2020-10-31 15:32 29 ********** ... ..( 6 skipped). .. ********** 44 2020-10-31 15:39 29 ********** 45 2020-10-31 15:40 30 *********** ... ..( 8 skipped). .. *********** 54 2020-10-31 15:49 30 *********** 55 2020-10-31 15:50 31 ************ ... ..( 7 skipped). .. ************ 63 2020-10-31 15:58 31 ************ 64 2020-10-31 15:59 32 ************* ... ..( 71 skipped). .. ************* 136 2020-10-31 17:11 32 ************* 137 2020-10-31 17:12 31 ************ ... ..( 7 skipped). .. ************ 145 2020-10-31 17:20 31 ************ 146 2020-10-31 17:21 30 *********** ... ..( 35 skipped). .. *********** 182 2020-10-31 17:57 30 *********** 183 2020-10-31 17:58 29 ********** ... ..( 85 skipped). .. ********** 269 2020-10-31 19:24 29 ********** 270 2020-10-31 19:25 30 *********** ... ..( 20 skipped). .. *********** 291 2020-10-31 19:46 30 *********** 292 2020-10-31 19:47 ? - 293 2020-10-31 19:48 23 **** 294 2020-10-31 19:49 24 ***** 295 2020-10-31 19:50 25 ****** 296 2020-10-31 19:51 25 ****** 297 2020-10-31 19:52 26 ******* 298 2020-10-31 19:53 26 ******* 299 2020-10-31 19:54 27 ******** ... ..( 2 skipped). .. ******** 302 2020-10-31 19:57 27 ******** 303 2020-10-31 19:58 28 ********* ... ..( 4 skipped). .. ********* 308 2020-10-31 20:03 28 ********* 309 2020-10-31 20:04 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1349 --- Lifetime Power-On Resets 0x01 0x010 4 4877 --- Power-on Hours 0x01 0x018 6 24741011009 --- Logical Sectors Written 0x01 0x020 6 298162315 --- Number of Write Commands 0x01 0x028 6 17071999390 --- Logical Sectors Read 0x01 0x030 6 241758619 --- Number of Read Commands 0x01 0x038 6 17557987480 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (empty) == 0x03 ===== = = === == Rotating Media Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 10114 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 -D- Current Temperature 0x05 0x010 1 - -D- Average Short Term Temperature 0x05 0x018 1 0 -D- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 - -D- Highest Average Short Term Temperature 0x05 0x038 1 - -D- Lowest Average Short Term Temperature 0x05 0x040 1 - -D- Highest Average Long Term Temperature 0x05 0x048 1 - -D- Lowest Average Long Term Temperature 0x05 0x050 4 0 -D- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 -D- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 10114 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 8 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: S1Z40102 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Oct 31 20:04:09 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 9 Power_On_Hours -O--CK 100 100 000 - 1157 12 Power_Cycle_Count -O--CK 100 100 000 - 765 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 0 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 0 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 108 194 Temperature_Celsius -O---K 036 063 000 - 36 (Min/Max 25/63) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count -O--CK 100 100 000 - 0 231 SSD_Life_Left ------ 091 091 000 - 91 233 Flash_Writes_GiB -O--CK 100 100 000 - 7386 241 Lifetime_Writes_GiB -O--CK 100 100 000 - 5780 242 Lifetime_Reads_GiB -O--CK 100 100 000 - 5840 244 Average_Erase_Count ------ 100 100 000 - 97 245 Max_Erase_Count ------ 100 100 000 - 117 246 Total_Erase_Count ------ 100 100 000 - 47969 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 29 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 29 [0] log entry is empty Error 28 [3] log entry is empty Error 27 [2] log entry is empty Error 26 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] 2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT 2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 765 --- Lifetime Power-On Resets 0x01 0x010 4 1157 --- Power-on Hours 0x01 0x018 6 3531642114 --- Logical Sectors Written 0x01 0x020 6 29392 --- Number of Write Commands 0x01 0x028 6 3658165985 --- Logical Sectors Read 0x01 0x030 6 235 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 9 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET /dev/ada2 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SBFK61K1 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Oct 31 20:04:09 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 417 12 Power_Cycle_Count -O--CK 100 100 000 - 224 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 15 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/72 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 1 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 27 194 Temperature_Celsius -O---K 030 047 000 - 30 (Min/Max 22/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count -O--CK 100 100 000 - 0 231 SSD_Life_Left ------ 100 100 000 - 100 233 Flash_Writes_GiB -O--CK 100 100 000 - 86 241 Lifetime_Writes_GiB -O--CK 100 100 000 - 116 242 Lifetime_Reads_GiB -O--CK 100 100 000 - 40 244 Average_Erase_Count ------ 100 100 000 - 0 245 Max_Erase_Count ------ 100 100 000 - 1 246 Total_Erase_Count ------ 100 100 000 - 8096 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 224 --- Lifetime Power-On Resets 0x01 0x010 4 417 --- Power-on Hours 0x01 0x018 6 244558827 --- Logical Sectors Written 0x01 0x028 6 85144385 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 30 --- Current Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/da0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: Hitachi HTS545050A7E380 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GG2OA7J0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sat Oct 31 20:04:09 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 214 214 033 - 1 4 Start_Stop_Count -O--C- 099 099 000 - 1745 5 Reallocated_Sector_Ct PO--CK 096 096 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 095 095 000 - 2239 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 870 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 200 193 Load_Cycle_Count -O--C- 095 095 000 - 51262 194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 15/48) 196 Reallocated_Event_Count -O--CK 095 095 000 - 341 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 6 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [1] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 23 4a e5 90 03 00 Error: UNC 16 sectors at LBA = 0x234ae590 = 592110992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 23 4a e5 80 40 00 00:07:38.761 READ DMA EXT 25 00 00 00 40 00 00 00 00 78 18 40 00 00:07:38.759 READ DMA EXT 25 00 00 00 80 00 00 23 4a e5 00 40 00 00:07:38.675 READ DMA EXT 25 00 00 00 20 00 00 00 00 78 f8 40 00 00:07:38.648 READ DMA EXT 25 00 00 00 40 00 00 23 4a dc 60 40 00 00:07:38.647 READ DMA EXT Error 5 [0] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 23 4a e5 90 03 00 Error: UNC 16 sectors at LBA = 0x234ae590 = 592110992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 23 4a e5 80 40 00 00:02:51.607 READ DMA EXT 25 00 00 00 20 00 00 2e 83 05 e0 40 00 00:02:51.606 READ DMA EXT 25 00 00 00 80 00 00 23 4a e5 00 40 00 00:02:51.443 READ DMA EXT 25 00 00 00 20 00 00 2e 83 06 00 40 00 00:02:51.434 READ DMA EXT 25 00 00 00 20 00 00 2e 83 00 a0 40 00 00:02:51.419 READ DMA EXT Error 4 [3] occurred at disk power-on lifetime: 556 hours (23 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 0c 30 3e 90 0c 00 Error: UNC 16 sectors at LBA = 0x0c303e90 = 204488336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:44.580 READ DMA EXT 35 00 00 00 20 00 00 2e 82 b2 a0 40 00 00:06:44.580 WRITE DMA EXT 35 00 00 00 20 00 00 1a a2 df c0 40 00 00:06:44.579 WRITE DMA EXT 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:40.658 READ DMA EXT 25 00 00 00 04 00 00 01 8d 07 ec 40 00 00:06:40.623 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 556 hours (23 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 0c 30 3e 90 0c 00 Error: UNC 16 sectors at LBA = 0x0c303e90 = 204488336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:40.658 READ DMA EXT 25 00 00 00 04 00 00 01 8d 07 ec 40 00 00:06:40.623 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 00 00 00:06:40.622 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:06:40.602 IDENTIFY DEVICE 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:36.974 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 21/33 Celsius Lifetime Min/Max Temperature: 15/48 Celsius Specified Max Operating Temperature: 29 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2020-10-31 17:57 24 ***** ... ..( 4 skipped). .. ***** 49 2020-10-31 18:02 24 ***** 50 2020-10-31 18:03 23 **** 51 2020-10-31 18:04 24 ***** 52 2020-10-31 18:05 23 **** ... ..( 3 skipped). .. **** 56 2020-10-31 18:09 23 **** 57 2020-10-31 18:10 24 ***** 58 2020-10-31 18:11 23 **** ... ..( 68 skipped). .. **** 127 2020-10-31 19:20 23 **** 0 2020-10-31 19:21 22 *** 1 2020-10-31 19:22 23 **** ... ..( 2 skipped). .. **** 4 2020-10-31 19:25 23 **** 5 2020-10-31 19:26 22 *** 6 2020-10-31 19:27 23 **** ... ..( 4 skipped). .. **** 11 2020-10-31 19:32 23 **** 12 2020-10-31 19:33 22 *** 13 2020-10-31 19:34 23 **** ... ..( 15 skipped). .. **** 29 2020-10-31 19:50 23 **** 30 2020-10-31 19:51 24 ***** ... ..( 2 skipped). .. ***** 33 2020-10-31 19:54 24 ***** 34 2020-10-31 19:55 25 ****** ... ..( 5 skipped). .. ****** 40 2020-10-31 20:01 25 ****** 41 2020-10-31 20:02 26 ******* 42 2020-10-31 20:03 26 ******* 43 2020-10-31 20:04 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS