/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST500DM002-1BD142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: KC47 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Dec 4 03:54:00 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 81) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 103 099 006 - 120080 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 516 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 9097654767 9 Power_On_Hours -O--CK 052 052 000 - 42878 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 514 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 1 1 1 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 065 058 045 - 35 (Min/Max 35/37) 194 Temperature_Celsius -O---K 035 042 000 - 35 (0 12 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 022 021 000 - 120080 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 42872h+35m+10.321s 241 Total_LBAs_Written ------ 100 253 000 - 3921248507 242 Total_LBAs_Read ------ 100 253 000 - 3510307224 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2648 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/37 Celsius Lifetime Min/Max Temperature: 12/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (45) Index Estimated Time Temperature Celsius 46 2021-11-28 22:29 33 ************** 47 2021-11-28 23:28 32 ************* 48 2021-11-29 00:27 32 ************* 49 2021-11-29 01:26 31 ************ 50 2021-11-29 02:25 31 ************ 51 2021-11-29 03:24 30 *********** 52 2021-11-29 04:23 30 *********** 53 2021-11-29 05:22 32 ************* 54 2021-11-29 06:21 34 *************** 55 2021-11-29 07:20 35 **************** 56 2021-11-29 08:19 33 ************** 57 2021-11-29 09:18 32 ************* ... ..( 5 skipped). .. ************* 63 2021-11-29 15:12 32 ************* 64 2021-11-29 16:11 31 ************ ... ..( 3 skipped). .. ************ 68 2021-11-29 20:07 31 ************ 69 2021-11-29 21:06 30 *********** ... ..( 2 skipped). .. *********** 72 2021-11-30 00:03 30 *********** 73 2021-11-30 01:02 34 *************** 74 2021-11-30 02:01 32 ************* ... ..( 2 skipped). .. ************* 77 2021-11-30 04:58 32 ************* 78 2021-11-30 05:57 31 ************ ... ..( 3 skipped). .. ************ 82 2021-11-30 09:53 31 ************ 83 2021-11-30 10:52 36 ***************** 84 2021-11-30 11:51 34 *************** 85 2021-11-30 12:50 33 ************** 86 2021-11-30 13:49 32 ************* ... ..( 7 skipped). .. ************* 94 2021-11-30 21:41 32 ************* 95 2021-11-30 22:40 34 *************** 96 2021-11-30 23:39 33 ************** 97 2021-12-01 00:38 32 ************* 98 2021-12-01 01:37 32 ************* 99 2021-12-01 02:36 32 ************* 100 2021-12-01 03:35 31 ************ 101 2021-12-01 04:34 31 ************ 102 2021-12-01 05:33 31 ************ 103 2021-12-01 06:32 35 **************** 104 2021-12-01 07:31 33 ************** ... ..( 4 skipped). .. ************** 109 2021-12-01 12:26 33 ************** 110 2021-12-01 13:25 34 *************** 111 2021-12-01 14:24 34 *************** 112 2021-12-01 15:23 34 *************** 113 2021-12-01 16:22 33 ************** 114 2021-12-01 17:21 36 ***************** 115 2021-12-01 18:20 35 **************** 116 2021-12-01 19:19 35 **************** 117 2021-12-01 20:18 35 **************** 118 2021-12-01 21:17 34 *************** 119 2021-12-01 22:16 34 *************** 120 2021-12-01 23:15 33 ************** ... ..( 5 skipped). .. ************** 126 2021-12-02 05:09 33 ************** 127 2021-12-02 06:08 34 *************** 0 2021-12-02 07:07 33 ************** ... ..( 2 skipped). .. ************** 3 2021-12-02 10:04 33 ************** 4 2021-12-02 11:03 ? - 5 2021-12-02 12:02 33 ************** 6 2021-12-02 13:01 35 **************** 7 2021-12-02 14:00 35 **************** 8 2021-12-02 14:59 35 **************** 9 2021-12-02 15:58 34 *************** ... ..( 4 skipped). .. *************** 14 2021-12-02 20:53 34 *************** 15 2021-12-02 21:52 33 ************** 16 2021-12-02 22:51 33 ************** 17 2021-12-02 23:50 33 ************** 18 2021-12-03 00:49 32 ************* 19 2021-12-03 01:48 32 ************* 20 2021-12-03 02:47 32 ************* 21 2021-12-03 03:46 33 ************** 22 2021-12-03 04:45 33 ************** 23 2021-12-03 05:44 32 ************* 24 2021-12-03 06:43 33 ************** 25 2021-12-03 07:42 34 *************** 26 2021-12-03 08:41 33 ************** 27 2021-12-03 09:40 ? - 28 2021-12-03 10:39 33 ************** 29 2021-12-03 11:38 ? - 30 2021-12-03 12:37 33 ************** 31 2021-12-03 13:36 ? - 32 2021-12-03 14:35 35 **************** 33 2021-12-03 15:34 ? - 34 2021-12-03 16:33 35 **************** 35 2021-12-03 17:32 ? - 36 2021-12-03 18:31 35 **************** ... ..( 6 skipped). .. **************** 43 2021-12-04 01:24 35 **************** 44 2021-12-04 02:23 ? - 45 2021-12-04 03:22 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/da0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SB2 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: SBFM61.2 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 4 03:54:00 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 25 9 Power_On_Hours -O--C- 100 100 000 - 24109 12 Power_Cycle_Count -O--C- 100 100 000 - 148 168 Unknown_Attribute -O--C- 100 100 000 - 0 170 Unknown_Attribute PO---- 082 082 010 - 8589934707 173 Unknown_Attribute -O--C- 100 100 000 - 4456549 192 Power-Off_Retract_Count -O--C- 100 100 000 - 122 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 Unknown_Attribute PO-R-- 100 100 050 - 0 231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 241 Total_LBAs_Written -O--C- 100 100 000 - 3182 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 25 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 25 [24] occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 79 b0 40 02 Error: UNC 240 sectors at LBA = 0x000279b0 = 162224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 79 b0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 0a 19 d6 30 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 9d 58 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 9c 68 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 87 98 40 02 00:00:00.000 READ DMA EXT Error 24 [23] occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 6a a8 40 02 Error: UNC 240 sectors at LBA = 0x00026aa8 = 158376 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 6a a8 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 89 28 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 88 38 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 84 d0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 83 e0 40 02 00:00:00.000 READ DMA EXT Error 23 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 18 00 00 00 02 69 88 40 02 Error: UNC 24 sectors at LBA = 0x00026988 = 158088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 18 00 00 00 02 69 88 40 02 00:00:00.000 READ DMA EXT 35 00 00 00 f0 00 00 00 0b 20 00 40 02 00:00:00.000 WRITE DMA EXT 25 00 00 00 10 00 00 09 f7 fb c0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 0b 01 0c 08 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 20 00 00 0e 84 29 18 40 02 00:00:00.000 READ DMA EXT Error 22 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 00 02 81 18 40 02 Error: UNC 16 sectors at LBA = 0x00028118 = 164120 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 00 02 81 18 40 02 00:00:00.000 READ DMA EXT ef 00 02 00 00 00 00 00 00 00 00 00 02 00:00:00.000 SET FEATURES [Enable write cache] ef 00 03 00 46 00 00 00 00 00 00 00 02 00:00:00.000 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 a0 02 00:00:00.000 IDENTIFY DEVICE ff 00 d5 00 01 00 00 00 00 00 01 00 04 00:00:00.000 [VENDOR SPECIFIC] Error 21 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 80 28 40 02 Error: UNC 240 sectors at LBA = 0x00028028 = 163880 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 80 28 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 8a 50 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 89 60 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 00 02 7a 30 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 7a a0 40 02 00:00:00.000 READ DMA EXT Error 20 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 79 b0 40 02 Error: UNC 240 sectors at LBA = 0x000279b0 = 162224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 79 b0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 0a 19 d6 30 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 9d 58 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 9c 68 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 87 98 40 02 00:00:00.000 READ DMA EXT Error 19 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 6a a8 40 02 Error: UNC 240 sectors at LBA = 0x00026aa8 = 158376 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 6a a8 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 89 28 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 88 38 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 02 84 d0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 f0 00 00 00 02 83 e0 40 02 00:00:00.000 READ DMA EXT Error 18 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 00 02 69 88 40 02 Error: UNC 240 sectors at LBA = 0x00026988 = 158088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 02 69 88 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 09 88 07 88 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 18 00 00 0a c4 2f a0 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 09 e1 bb 48 40 02 00:00:00.000 READ DMA EXT 25 00 00 00 78 00 00 09 e1 2a 10 40 02 00:00:00.000 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 24109 --- Power-on Hours 0x01 0x018 6 6674986993 --- Logical Sectors Written 0x01 0x028 6 14287684752 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 25 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC