/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD642JJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: 1AA01110 User Capacity: 640,133,946,880 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Sun Jun 13 07:50:13 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7702) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 129) minutes. Conveyance self-test routine recommended polling time: ( 14) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 083 051 - 52 3 Spin_Up_Time POS--- 086 086 011 - 5210 4 Start_Stop_Count -O--CK 077 077 000 - 23024 5 Reallocated_Sector_Ct PO--CK 090 090 010 - 282 7 Seek_Error_Rate POSR-- 100 100 051 - 29 8 Seek_Time_Performance P-S--K 100 100 015 - 0 9 Power_On_Hours -O--CK 093 093 000 - 34237 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 091 091 000 - 6780 12 Power_Cycle_Count -O--CK 085 085 000 - 14789 13 Read_Soft_Error_Rate -OSR-- 100 083 000 - 44 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 4847 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 084 062 000 - 16 (Min/Max 16/16) 194 Temperature_Celsius -O---K 081 059 000 - 19 (Min/Max 16/19) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 120235 196 Reallocated_Event_Count -O--CK 094 094 000 - 249 197 Current_Pending_Sector -O--C- 100 098 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 15 200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 9 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 4529 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4529 [0] occurred at disk power-on lifetime: 34235 hours (1426 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 42 00 00 00 00 00 00 02 00 40 00 at LBA = 0x00000200 = 512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 00 02 00 40 00 00:13:02.580 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 00 00 00 40 00 00:13:02.580 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 00 00 10 40 00 00:13:02.580 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 00 00 80 40 00 00:13:02.000 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 85 7a 6e 40 00 00:13:02.000 READ FPDMA QUEUED Error 4528 [7] occurred at disk power-on lifetime: 34235 hours (1426 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 09 68 f8 40 00 Error: UNC at LBA = 0x000968f8 = 616696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 60 00 00 00 09 68 20 40 00 00:12:20.150 READ DMA EXT 25 00 00 00 08 00 00 00 39 67 f8 40 00 00:12:20.150 READ DMA EXT 25 00 00 00 01 00 00 4a 85 7a 6e 40 00 00:12:20.150 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 40 00 00:12:20.150 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 01 40 00 00:12:20.150 READ DMA EXT Error 4527 [6] occurred at disk power-on lifetime: 34233 hours (1426 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 0d 8a 40 00 Error: UNC at LBA = 0x00000d8a = 3466 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 80 00 00 00 00 0d 50 40 00 00:02:02.900 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:02.870 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:39.830 IDENTIFY DEVICE 25 00 00 00 01 00 00 48 85 78 00 40 00 00:01:39.830 READ DMA EXT 25 00 00 00 01 00 00 48 85 78 00 40 00 00:01:39.830 READ DMA EXT Error 4526 [5] occurred at disk power-on lifetime: 34220 hours (1425 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 40 00 00 00 00 00 00 00 0f 40 00 at LBA = 0x0000000f = 15 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 00 00 00 40 00 00:16:07.700 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 00 00:16:07.680 IDENTIFY DEVICE ef 00 10 00 03 00 00 00 00 00 00 00 00 00:16:07.670 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 00 00 00:16:07.650 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 00 00 00:16:07.620 IDENTIFY DEVICE Error 4525 [4] occurred at disk power-on lifetime: 34189 hours (1424 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 97 9a 40 00 Error: UNC at LBA = 0x0000979a = 38810 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 09 00 00 00 00 00 97 00 40 00 00:02:55.470 READ DMA EXT 25 00 00 00 80 00 00 00 00 96 80 40 00 00:02:54.810 READ DMA EXT 25 00 00 00 40 00 00 00 69 56 40 40 00 00:01:54.210 READ DMA EXT 25 00 00 00 08 00 00 00 69 56 40 40 00 00:01:54.210 READ DMA EXT Error 4524 [3] occurred at disk power-on lifetime: 34189 hours (1424 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 69 56 78 40 00 Error: UNC at LBA = 0x00695678 = 6903416 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 00 69 56 40 40 00 00:01:53.280 READ DMA EXT 25 00 00 00 40 00 00 00 69 56 00 40 00 00:01:52.730 READ DMA EXT 25 00 00 00 40 00 00 00 69 55 c0 40 00 00:01:51.640 READ DMA EXT 25 00 00 00 40 00 00 00 69 55 80 40 00 00:01:51.640 READ DMA EXT 25 00 00 00 40 00 00 00 69 55 40 40 00 00:01:51.640 READ DMA EXT Error 4523 [2] occurred at disk power-on lifetime: 34170 hours (1423 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 42 00 00 00 00 00 04 18 05 40 00 at LBA = 0x00041805 = 268293 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 02 00 00 00 00 03 fc 22 40 00 00:22:43.190 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 04 18 00 40 00 00:22:43.190 READ FPDMA QUEUED 60 00 00 01 f8 00 00 00 00 02 2a 40 00 00:22:42.590 READ FPDMA QUEUED 60 00 00 00 f8 00 00 00 00 01 2a 40 00 00:22:42.590 READ FPDMA QUEUED 60 00 00 00 78 00 00 00 00 00 aa 40 00 00:22:42.590 READ FPDMA QUEUED Error 4522 [1] occurred at disk power-on lifetime: 34166 hours (1423 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 42 00 00 00 00 00 06 09 88 40 00 at LBA = 0x00060988 = 395656 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 06 09 88 40 00 00:33:50.890 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 04 0a c0 40 00 00:33:50.890 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 04 0a b8 40 00 00:33:50.890 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 04 0a b0 40 00 00:33:50.890 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 04 09 a0 40 00 00:33:50.890 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 19 Celsius Power Cycle Min/Max Temperature: --/19 Celsius Lifetime Min/Max Temperature: --/45 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2021-06-13 05:43 31 ************ ... ..( 6 skipped). .. ************ 85 2021-06-13 05:50 31 ************ 86 2021-06-13 05:51 32 ************* ... ..( 5 skipped). .. ************* 92 2021-06-13 05:57 32 ************* 93 2021-06-13 05:58 31 ************ ... ..( 17 skipped). .. ************ 111 2021-06-13 06:16 31 ************ 112 2021-06-13 06:17 32 ************* ... ..( 23 skipped). .. ************* 8 2021-06-13 06:41 32 ************* 9 2021-06-13 06:42 31 ************ ... ..( 30 skipped). .. ************ 40 2021-06-13 07:13 31 ************ 41 2021-06-13 07:14 32 ************* ... ..( 12 skipped). .. ************* 54 2021-06-13 07:27 32 ************* 55 2021-06-13 07:28 31 ************ 56 2021-06-13 07:29 32 ************* ... ..( 3 skipped). .. ************* 60 2021-06-13 07:33 32 ************* 61 2021-06-13 07:34 ? - 62 2021-06-13 07:35 16 - 63 2021-06-13 07:36 17 - 64 2021-06-13 07:37 17 - 65 2021-06-13 07:38 18 - 66 2021-06-13 07:39 19 - ... ..( 10 skipped). .. - 77 2021-06-13 07:50 19 - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 7K750 Device Model: Hitachi HTS727550A9E364 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JF3OA0D0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jun 13 07:50:14 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 107) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 217 217 033 - 2 4 Start_Stop_Count -O--C- 096 096 000 - 7824 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 088 088 000 - 5409 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 5141 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 098 098 000 - 581 193 Load_Cycle_Count -O--C- 056 056 000 - 448288 194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 11/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 126 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 78 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 78 [1] occurred at disk power-on lifetime: 5061 hours (210 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 20 00 00 00 17 bb 58 00 00 Error: IDNF at LBA = 0x0017bb58 = 1555288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 c0 00 00 00 17 bb 38 40 00 02:53:33.263 READ FPDMA QUEUED 60 00 08 00 b8 00 00 00 17 b9 58 40 00 02:53:33.252 READ FPDMA QUEUED 61 00 08 00 b0 00 00 00 6b 89 b0 40 00 02:53:33.251 WRITE FPDMA QUEUED 60 00 08 00 a8 00 00 01 c0 bb ae 40 00 02:53:33.249 READ FPDMA QUEUED 60 00 08 00 a0 00 00 01 c0 ba 3e 40 00 02:53:33.248 READ FPDMA QUEUED Error 77 [0] occurred at disk power-on lifetime: 5061 hours (210 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6b cf a8 00 00 Error: IDNF at LBA = 0x006bcfa8 = 7065512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 f0 00 c0 00 00 00 67 84 c8 40 00 02:49:33.244 WRITE FPDMA QUEUED 60 00 28 00 b8 00 00 00 6b cf 98 40 00 02:49:33.137 READ FPDMA QUEUED 61 00 10 00 b0 00 00 04 42 e0 30 40 00 02:49:33.136 WRITE FPDMA QUEUED 61 00 02 00 a8 00 00 00 c4 b7 6f 40 00 02:49:33.136 WRITE FPDMA QUEUED 61 00 08 00 a0 00 00 02 f3 d5 80 40 00 02:49:33.135 WRITE FPDMA QUEUED Error 76 [3] occurred at disk power-on lifetime: 5060 hours (210 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 32 00 00 02 1d 60 00 02 00 Error: IDNF at LBA = 0x021d6000 = 35479552 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 00 7e f9 88 40 00 01:49:56.586 READ FPDMA QUEUED 60 00 40 00 b8 00 00 02 1d 5f f2 40 00 01:49:56.586 READ FPDMA QUEUED 61 00 08 00 b0 00 00 00 b5 39 28 40 00 01:49:56.586 WRITE FPDMA QUEUED 61 00 08 00 a8 00 00 00 b4 d4 a8 40 00 01:49:56.586 WRITE FPDMA QUEUED 60 00 06 00 a0 00 00 1d 3c 6f 40 40 00 01:49:56.586 READ FPDMA QUEUED Error 75 [2] occurred at disk power-on lifetime: 5060 hours (210 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 09 00 00 00 73 66 68 00 00 Error: IDNF at LBA = 0x00736668 = 7562856 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 c8 00 00 00 73 66 51 40 00 01:46:20.228 READ FPDMA QUEUED 60 00 08 00 c0 00 00 00 37 8f 10 40 00 01:46:20.179 READ FPDMA QUEUED 60 00 04 00 b8 00 00 02 71 e4 98 40 00 01:46:19.834 READ FPDMA QUEUED 60 00 05 00 b0 00 00 1d 3c e9 48 40 00 01:46:19.811 READ FPDMA QUEUED 60 00 08 00 a8 00 00 02 d2 77 e8 40 00 01:46:19.787 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 23/25 Celsius Lifetime Min/Max Temperature: 11/53 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (81) Index Estimated Time Temperature Celsius 82 2021-06-13 05:43 32 ************* ... ..( 9 skipped). .. ************* 92 2021-06-13 05:53 32 ************* 93 2021-06-13 05:54 33 ************** 94 2021-06-13 05:55 32 ************* 95 2021-06-13 05:56 32 ************* 96 2021-06-13 05:57 33 ************** 97 2021-06-13 05:58 32 ************* ... ..( 4 skipped). .. ************* 102 2021-06-13 06:03 32 ************* 103 2021-06-13 06:04 33 ************** 104 2021-06-13 06:05 33 ************** 105 2021-06-13 06:06 33 ************** 106 2021-06-13 06:07 32 ************* 107 2021-06-13 06:08 33 ************** ... ..( 34 skipped). .. ************** 14 2021-06-13 06:43 33 ************** 15 2021-06-13 06:44 32 ************* 16 2021-06-13 06:45 33 ************** ... ..( 12 skipped). .. ************** 29 2021-06-13 06:58 33 ************** 30 2021-06-13 06:59 32 ************* 31 2021-06-13 07:00 33 ************** ... ..( 42 skipped). .. ************** 74 2021-06-13 07:43 33 ************** 75 2021-06-13 07:44 34 *************** 76 2021-06-13 07:45 ? - 77 2021-06-13 07:46 23 **** 78 2021-06-13 07:47 24 ***** 79 2021-06-13 07:48 24 ***** 80 2021-06-13 07:49 25 ****** 81 2021-06-13 07:50 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS