/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250310AS Serial Number: -- Firmware Version: 3.AAA User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri May 5 08:26:48 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 080 006 - 160903916 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7399 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 085 060 030 - 385543370 9 Power_On_Hours -O--CK 091 091 000 - 8407 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 093 093 020 - 7789 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 037 045 Past 40 (Min/Max 40/41) 194 Temperature_Celsius -O---K 040 063 000 - 40 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 063 049 000 - 182847083 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 0 Vendor specific 0x8004 2 0 Vendor specific /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 SD Device Model: SAMSUNG HD080HJ Serial Number: -- Firmware Version: WT100-33 User Capacity: 80,025,280,000 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Fri May 5 08:26:48 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1925) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 32) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 3 Spin_Up_Time POS--- 100 100 025 - 4288 4 Start_Stop_Count -O--CK 098 098 000 - 2081 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 7739 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 253 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1642 190 Airflow_Temperature_Cel -O---K 118 067 000 - 40 194 Temperature_Celsius -O---K 118 067 000 - 40 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 146 196 Reallocated_Event_Count -O--CK 253 253 000 - 0 197 Current_Pending_Sector -O--C- 253 253 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0000, trying reserved byte (0x07) instead Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 650 hours (27 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 52 d5 df e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x0052d5df = 5428703 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 52 d5 df e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 37 e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 20 00 00 00 5e fd 07 e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 20 00 00 00 52 d5 bf e0 00 01:53:11.000 WRITE DMA EXT Error 6 [5] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 01 28 90 f7 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x012890f7 = 19435767 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 01 28 90 f7 e0 00 00:14:11.813 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 82 cf e0 00 00:14:11.813 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 9d ff e0 00 00:14:11.750 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 90 77 e0 00 00:14:11.750 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 82 4f e0 00 00:14:11.750 WRITE DMA EXT Error 5 [4] occurred at disk power-on lifetime: 637 hours (26 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 63 39 e7 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x006339e7 = 6502887 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 63 39 e7 e0 00 01:11:03.250 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:11:03.250 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 39 67 e0 00 01:11:03.188 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 38 e7 e0 00 01:11:03.125 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 38 67 e0 00 01:11:03.000 WRITE DMA EXT Error 4 [3] occurred at disk power-on lifetime: 6978 hours (290 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 02 a0 00 00 00 2b 4c 00 e0 00 Error: ICRC, ABRT 672 sectors at LBA = 0x002b4c00 = 2837504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 02 a0 00 00 00 2b 4c 00 e0 00 00:02:05.563 WRITE DMA EXT 35 00 00 02 00 00 00 00 2b 4a 00 e0 00 00:02:05.563 WRITE DMA EXT 35 00 00 04 00 00 00 00 2b 46 00 e0 00 00:02:05.563 WRITE DMA EXT 35 00 00 04 00 00 00 00 2b 42 00 e0 00 00:02:05.563 WRITE DMA EXT 35 00 00 02 00 00 00 00 2b 40 00 e0 00 00:02:05.563 WRITE DMA EXT Error 3 [2] occurred at disk power-on lifetime: 650 hours (27 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 52 d5 df e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x0052d5df = 5428703 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 52 d5 df e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 37 e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 20 00 00 00 5e fd 07 e0 00 01:53:11.000 WRITE DMA EXT 35 00 00 00 20 00 00 00 52 d5 bf e0 00 01:53:11.000 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 01 28 90 f7 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x012890f7 = 19435767 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 01 28 90 f7 e0 00 00:14:11.813 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 82 cf e0 00 00:14:11.813 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 9d ff e0 00 00:14:11.750 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 90 77 e0 00 00:14:11.750 WRITE DMA EXT 35 00 00 00 80 00 00 01 28 82 4f e0 00 00:14:11.750 WRITE DMA EXT Error 1 [0] occurred at disk power-on lifetime: 637 hours (26 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 63 39 e7 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x006339e7 = 6502887 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 63 39 e7 e0 00 01:11:03.250 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:11:03.250 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 39 67 e0 00 01:11:03.188 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 38 e7 e0 00 01:11:03.125 WRITE DMA EXT 35 00 00 00 80 00 00 00 63 38 67 e0 00 01:11:03.000 WRITE DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: --/47 Celsius Lifetime Min/Max Temperature: --/54 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 10/55 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (70) Index Estimated Time Temperature Celsius 71 2023-05-05 06:19 42 *********************** ... ..( 12 skipped). .. *********************** 84 2023-05-05 06:32 42 *********************** 85 2023-05-05 06:33 40 ********************* ... ..( 22 skipped). .. ********************* 108 2023-05-05 06:56 40 ********************* 109 2023-05-05 06:57 42 *********************** ... ..( 16 skipped). .. *********************** 126 2023-05-05 07:14 42 *********************** 127 2023-05-05 07:15 40 ********************* ... ..( 22 skipped). .. ********************* 22 2023-05-05 07:38 40 ********************* 23 2023-05-05 07:39 42 *********************** ... ..( 14 skipped). .. *********************** 38 2023-05-05 07:54 42 *********************** 39 2023-05-05 07:55 ? - 40 2023-05-05 07:56 45 ************************** 41 2023-05-05 07:57 45 ************************** 42 2023-05-05 07:58 47 **************************** 43 2023-05-05 07:59 41 ********************** ... ..( 2 skipped). .. ********************** 46 2023-05-05 08:02 41 ********************** 47 2023-05-05 08:03 40 ********************* ... ..( 4 skipped). .. ********************* 52 2023-05-05 08:08 40 ********************* 53 2023-05-05 08:09 42 *********************** ... ..( 10 skipped). .. *********************** 64 2023-05-05 08:20 42 *********************** 65 2023-05-05 08:21 40 ********************* ... ..( 4 skipped). .. ********************* 70 2023-05-05 08:26 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific /dev/ada2 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD251HJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: 1AC01113 User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Fri May 5 08:26:48 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3534) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 7) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 094 094 011 - 2670 4 Start_Stop_Count -O--CK 098 098 000 - 1827 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 0 9 Power_On_Hours -O--CK 095 095 000 - 27273 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 1778 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 070 062 000 - 30 (Min/Max 30/31) 194 Temperature_Celsius -O---K 070 060 000 - 30 (Min/Max 30/31) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 358 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 5 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 2 Write stream error log 0x22 GPL R/O 2 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 18526 hours (771 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 00 00 00 02 b6 bc dc e2 00 at LBA = 0x02b6bcdc = 45530332 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 00 00 00 00 b6 bc dc e2 02 00:29:28.050 WRITE DMA ca 00 00 00 df 00 00 00 b6 bb fd e2 02 00:29:28.050 WRITE DMA ca 00 00 00 00 00 00 00 b6 ba fd e2 02 00:29:28.050 WRITE DMA ca 00 00 00 00 00 00 00 b6 b9 fd e2 02 00:29:28.050 WRITE DMA ca 00 00 00 00 00 00 00 b6 b8 fd e2 02 00:29:28.040 WRITE DMA Error 6 [5] occurred at disk power-on lifetime: 17503 hours (729 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 00 00 00 03 07 06 35 e3 00 at LBA = 0x03070635 = 50791989 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 00 00 00 00 07 06 35 e3 02 17d+22:43:06.010 WRITE DMA ca 00 00 00 00 00 00 00 07 05 35 e3 02 17d+22:43:06.010 WRITE DMA ea 00 00 00 00 00 00 00 00 00 00 40 02 17d+22:43:01.160 FLUSH CACHE EXT 35 00 00 00 02 00 00 1c dd af c0 40 02 17d+22:43:01.160 WRITE DMA EXT 35 00 00 00 02 00 00 1c dd ad c0 40 02 17d+22:43:01.160 WRITE DMA EXT Error 5 [4] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 00 00 00 02 36 e6 e6 e2 00 at LBA = 0x0236e6e6 = 37152486 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 00 00 00 00 36 e6 e6 e2 02 6d+23:34:15.810 WRITE DMA ca 00 00 00 00 00 00 00 36 e5 e6 e2 02 6d+23:34:15.810 WRITE DMA ca 00 00 00 00 00 00 00 36 e4 e6 e2 02 6d+23:34:15.810 WRITE DMA ca 00 00 00 00 00 00 00 36 e3 e6 e2 02 6d+23:34:15.810 WRITE DMA ca 00 00 00 00 00 00 00 36 e2 e6 e2 02 6d+23:34:15.810 WRITE DMA Error 4 [3] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 00 00 00 02 34 70 aa e2 00 at LBA = 0x023470aa = 36991146 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 00 00 00 00 34 70 aa e2 02 6d+23:34:14.440 WRITE DMA ca 00 00 00 00 00 00 00 34 6f aa e2 02 6d+23:34:14.440 WRITE DMA ca 00 00 00 00 00 00 00 34 6e aa e2 02 6d+23:34:14.440 WRITE DMA ca 00 00 00 00 00 00 00 34 6d aa e2 02 6d+23:34:14.440 WRITE DMA ca 00 00 00 00 00 00 00 34 6c aa e2 02 6d+23:34:14.430 WRITE DMA Error 3 [2] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 00 00 00 02 2a ce 0b e2 00 at LBA = 0x022ace0b = 36359691 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 00 00 00 00 2a ce 0b e2 02 6d+23:34:08.440 WRITE DMA ca 00 00 00 00 00 00 00 2a cd 0b e2 02 6d+23:34:08.440 WRITE DMA ca 00 00 00 00 00 00 00 2a cc 0b e2 02 6d+23:34:08.430 WRITE DMA ca 00 00 00 00 00 00 00 2a cb 0b e2 02 6d+23:34:08.430 WRITE DMA ca 00 00 00 00 00 00 00 2a ca 0b e2 02 6d+23:34:08.430 WRITE DMA Error 2 [1] occurred at disk power-on lifetime: 14291 hours (595 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 08 00 00 0e cb 80 5f e0 00 8 sectors at LBA = 0x0ecb805f = 248217695 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 04 0b e4 9f e0 00 02:31:44.000 READ DMA EXT 25 00 00 00 08 00 00 0e cb 80 57 e0 00 02:31:43.990 READ DMA EXT 25 00 00 00 80 00 00 04 0b e5 8f e0 00 02:31:43.990 READ DMA EXT 25 00 00 00 10 00 00 04 0b e4 8f e0 00 02:31:43.990 READ DMA EXT 25 00 00 00 08 00 00 0e c9 d2 c7 e0 00 02:31:43.990 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 359 hours (14 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 53 00 10 00 00 0f 85 77 ff e0 00 Error: ICRC, ABRT 16 sectors at LBA = 0x0f8577ff = 260405247 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 20 00 00 0f 85 77 ef e0 00 01:31:01.800 WRITE DMA EXT ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:31:01.780 FLUSH CACHE EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:31:01.780 WRITE DMA EXT 35 00 00 00 20 00 00 0f 85 74 ef e0 00 01:31:01.780 WRITE DMA EXT ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:31:01.760 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: --/31 Celsius Lifetime Min/Max Temperature: --/51 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (42) Index Estimated Time Temperature Celsius 43 2023-05-05 06:19 30 *********** 44 2023-05-05 06:20 31 ************ 45 2023-05-05 06:21 31 ************ 46 2023-05-05 06:22 30 *********** 47 2023-05-05 06:23 31 ************ 48 2023-05-05 06:24 31 ************ 49 2023-05-05 06:25 30 *********** 50 2023-05-05 06:26 30 *********** 51 2023-05-05 06:27 30 *********** 52 2023-05-05 06:28 31 ************ 53 2023-05-05 06:29 30 *********** 54 2023-05-05 06:30 31 ************ 55 2023-05-05 06:31 31 ************ 56 2023-05-05 06:32 31 ************ 57 2023-05-05 06:33 30 *********** 58 2023-05-05 06:34 31 ************ ... ..( 84 skipped). .. ************ 15 2023-05-05 07:59 31 ************ 16 2023-05-05 08:00 30 *********** 17 2023-05-05 08:01 31 ************ ... ..( 11 skipped). .. ************ 29 2023-05-05 08:13 31 ************ 30 2023-05-05 08:14 30 *********** 31 2023-05-05 08:15 30 *********** 32 2023-05-05 08:16 30 *********** 33 2023-05-05 08:17 31 ************ 34 2023-05-05 08:18 30 *********** ... ..( 3 skipped). .. *********** 38 2023-05-05 08:22 30 *********** 39 2023-05-05 08:23 31 ************ 40 2023-05-05 08:24 31 ************ 41 2023-05-05 08:25 30 *********** 42 2023-05-05 08:26 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC