Probe #6d7bac1be1 of Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Kston 64GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: SBFQBB.3 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 23 20:59:10 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 572 12 Power_Cycle_Count -O--C- 100 100 000 - 34 161 Unknown_Attribute -O--C- 100 100 000 - 62 163 Unknown_Attribute PO---- 100 100 050 - 45 165 Unknown_Attribute ------ 100 100 000 - 6 166 Unknown_Attribute ------ 100 100 000 - 0 167 Unknown_Attribute ------ 100 100 000 - 2 172 Unknown_Attribute -O--C- 100 100 000 - 0 173 Unknown_Attribute -O---K 100 100 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 22 194 Temperature_Celsius PO---K 064 064 000 - 36 (Min/Max 33/36) 196 Reallocated_Event_Count ------ 100 100 000 - 0 198 Offline_Uncorrectable -O--C- 100 100 000 - 0 241 Total_LBAs_Written -O--C- 100 100 000 - 44 242 Total_LBAs_Read -O--C- 100 100 000 - 39 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 34 --- Lifetime Power-On Resets 0x01 0x010 4 572 --- Power-on Hours 0x01 0x018 6 93884742 --- Logical Sectors Written 0x01 0x028 6 82665623 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x020 1 36 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 8 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA MK1255GSX H Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: FG001Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Tue Feb 23 20:59:10 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 45) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 990 4 Start_Stop_Count -O--CK 100 100 000 - 1054 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 091 091 000 - 3849 10 Spin_Retry_Count PO--CK 121 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 982 191 G-Sense_Error_Rate -O--CK 100 100 000 - 66 192 Power-Off_Retract_Count -O--CK 100 100 000 - 41 193 Load_Cycle_Count -O--CK 094 094 000 - 69627 194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 14/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 84 222 Loaded_Hours -O--CK 096 096 000 - 1732 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 328 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: --/40 Celsius Lifetime Min/Max Temperature: --/52 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (53) Index Estimated Time Temperature Celsius 54 2021-02-23 13:02 35 **************** ... ..( 38 skipped). .. **************** 93 2021-02-23 13:41 35 **************** 94 2021-02-23 13:42 36 ***************** 95 2021-02-23 13:43 35 **************** ... ..( 8 skipped). .. **************** 104 2021-02-23 13:52 35 **************** 105 2021-02-23 13:53 36 ***************** 106 2021-02-23 13:54 35 **************** ... ..( 4 skipped). .. **************** 111 2021-02-23 13:59 35 **************** 112 2021-02-23 14:00 36 ***************** 113 2021-02-23 14:01 35 **************** ... ..( 9 skipped). .. **************** 123 2021-02-23 14:11 35 **************** 124 2021-02-23 14:12 36 ***************** 125 2021-02-23 14:13 35 **************** ... ..( 18 skipped). .. **************** 144 2021-02-23 14:32 35 **************** 145 2021-02-23 14:33 36 ***************** 146 2021-02-23 14:34 35 **************** ... ..( 2 skipped). .. **************** 149 2021-02-23 14:37 35 **************** 150 2021-02-23 14:38 36 ***************** 151 2021-02-23 14:39 35 **************** ... ..( 13 skipped). .. **************** 165 2021-02-23 14:53 35 **************** 166 2021-02-23 14:54 36 ***************** 167 2021-02-23 14:55 35 **************** ... ..( 32 skipped). .. **************** 200 2021-02-23 15:28 35 **************** 201 2021-02-23 15:29 36 ***************** 202 2021-02-23 15:30 35 **************** ... ..(109 skipped). .. **************** 312 2021-02-23 17:20 35 **************** 313 2021-02-23 17:21 36 ***************** 314 2021-02-23 17:22 35 **************** 315 2021-02-23 17:23 35 **************** 316 2021-02-23 17:24 36 ***************** 317 2021-02-23 17:25 35 **************** ... ..( 6 skipped). .. **************** 324 2021-02-23 17:32 35 **************** 325 2021-02-23 17:33 36 ***************** ... ..( 32 skipped). .. ***************** 358 2021-02-23 18:06 36 ***************** 359 2021-02-23 18:07 37 ****************** 360 2021-02-23 18:08 36 ***************** ... ..(101 skipped). .. ***************** 462 2021-02-23 19:50 36 ***************** 463 2021-02-23 19:51 ? - 464 2021-02-23 19:52 26 ******* 465 2021-02-23 19:53 27 ******** 466 2021-02-23 19:54 27 ******** 467 2021-02-23 19:55 28 ********* 468 2021-02-23 19:56 29 ********** 469 2021-02-23 19:57 29 ********** 470 2021-02-23 19:58 29 ********** 471 2021-02-23 19:59 30 *********** 472 2021-02-23 20:00 30 *********** 473 2021-02-23 20:01 30 *********** 474 2021-02-23 20:02 31 ************ ... ..( 2 skipped). .. ************ 477 2021-02-23 20:05 31 ************ 0 2021-02-23 20:06 32 ************* ... ..( 3 skipped). .. ************* 4 2021-02-23 20:10 32 ************* 5 2021-02-23 20:11 33 ************** 6 2021-02-23 20:12 33 ************** 7 2021-02-23 20:13 33 ************** 8 2021-02-23 20:14 34 *************** ... ..( 4 skipped). .. *************** 13 2021-02-23 20:19 34 *************** 14 2021-02-23 20:20 35 **************** 15 2021-02-23 20:21 35 **************** 16 2021-02-23 20:22 35 **************** 17 2021-02-23 20:23 ? - 18 2021-02-23 20:24 ? - 19 2021-02-23 20:25 ? - 20 2021-02-23 20:26 40 ********************* ... ..( 4 skipped). .. ********************* 25 2021-02-23 20:31 40 ********************* 26 2021-02-23 20:32 39 ******************** 27 2021-02-23 20:33 39 ******************** 28 2021-02-23 20:34 39 ******************** 29 2021-02-23 20:35 40 ********************* 30 2021-02-23 20:36 40 ********************* 31 2021-02-23 20:37 39 ******************** ... ..( 19 skipped). .. ******************** 51 2021-02-23 20:57 39 ******************** 52 2021-02-23 20:58 38 ******************* 53 2021-02-23 20:59 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub