/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080M0 Serial Number: -- Firmware Version: YAR51HW0 User Capacity: 81,964,302,336 bytes [81.9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Tue Nov 9 18:10:14 2021 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 192 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 226 224 063 - 6456 4 Start_Stop_Count -O--CK 245 245 000 - 16157 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 8 Seek_Time_Performance POS--K 251 238 187 - 37140 9 Power_On_Minutes -O--CK 135 135 000 - 756h+07m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 243 243 000 - 4223 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 40 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 2604 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 175 001 000 - 3531 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 4 202 Data_Address_Mark_Errs -O-R-- 253 249 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 0 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 196 180 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 4189 inconsistent with error log pointer 5 ATA Error Count: 4189 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4189 occurred at disk power-on lifetime: 38590 hours (1607 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 20 a0 3c 60 e3 Error: ICRC, ABRT at LBA = 0x03603ca0 = 56638624 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 60 60 3c 60 e3 00 01:12:31.056 WRITE DMA c6 00 10 00 00 00 e0 00 01:12:31.056 SET MULTIPLE MODE ef 03 45 00 00 00 e0 00 01:12:31.056 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 e0 00 01:12:31.056 IDENTIFY DEVICE ca 00 60 60 3c 60 e3 04 01:12:30.960 WRITE DMA Error 4188 occurred at disk power-on lifetime: 38590 hours (1607 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 68 1c f8 e1 Error: ICRC, ABRT at LBA = 0x01f81c68 = 33037416 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 68 1c f8 e1 00 01:10:15.024 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.960 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.896 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.832 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.768 READ DMA Error 4187 occurred at disk power-on lifetime: 38590 hours (1607 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 68 1c f8 e1 Error: ICRC, ABRT at LBA = 0x01f81c68 = 33037416 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 68 1c f8 e1 00 01:10:14.960 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.896 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.832 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.768 READ DMA ca 00 10 10 0a 40 e0 00 01:10:14.752 WRITE DMA Error 4186 occurred at disk power-on lifetime: 38590 hours (1607 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 68 1c f8 e1 Error: ICRC, ABRT at LBA = 0x01f81c68 = 33037416 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 68 1c f8 e1 00 01:10:14.896 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.832 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.768 READ DMA ca 00 10 10 0a 40 e0 00 01:10:14.752 WRITE DMA ca 00 10 10 b6 8a e9 00 01:10:14.752 WRITE DMA Error 4185 occurred at disk power-on lifetime: 38590 hours (1607 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 68 1c f8 e1 Error: ICRC, ABRT at LBA = 0x01f81c68 = 33037416 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 68 1c f8 e1 00 01:10:14.832 READ DMA c8 00 e0 68 1c f8 e1 00 01:10:14.768 READ DMA ca 00 10 10 0a 40 e0 00 01:10:14.752 WRITE DMA ca 00 10 10 b6 8a e9 00 01:10:14.752 WRITE DMA ca 00 10 10 b4 8a e9 00 01:10:14.752 WRITE DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 38582 - # 2 Short offline Aborted by host 70% 35615 - # 3 Short offline Completed without error 00% 34562 - # 4 Short offline Completed without error 00% 33869 - # 5 Short offline Completed without error 00% 33176 - # 6 Short offline Completed without error 00% 32483 - # 7 Short offline Completed without error 00% 31827 - # 8 Short offline Completed without error 00% 31135 - # 9 Short offline Completed without error 00% 30442 - #10 Short offline Completed without error 00% 29749 - #11 Short offline Completed without error 00% 29076 - #12 Short offline Completed without error 00% 28383 - #13 Short offline Completed without error 00% 27786 - #14 Short offline Completed without error 00% 27094 - #15 Short offline Completed without error 00% 26401 - #16 Short offline Completed without error 00% 25725 - #17 Short offline Completed without error 00% 25050 - #18 Short offline Completed without error 00% 24357 - #19 Short offline Completed without error 00% 23686 - #20 Short offline Completed without error 00% 22993 - #21 Short offline Completed without error 00% 22300 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported