/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30003 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Feb 3 00:13:31 2021 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (13500) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 225) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 190 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 093 089 025 - 2417 4 Start_Stop_Count -O--CK 099 099 000 - 1429 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 5420 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 354 12 Power_Cycle_Count -O--CK 099 099 000 - 1446 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 18358287 191 G-Sense_Error_Rate -O---K 100 100 000 - 424 192 Power-Off_Retract_Count -O---K 100 100 000 - 192 193 Load_Cycle_Count -O--CK 098 098 000 - 25423 194 Temperature_Celsius -O---- 064 043 000 - 30 (Min/Max 8/57) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 1 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 3828 240 Head_Flying_Hours -O--CK 100 100 000 - 5349 241 Total_LBAs_Written -O--CK 095 089 000 - 7057653 242 Total_LBAs_Read -O--CK 093 088 000 - 10422934 254 Free_Fall_Sensor -O--CK 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 175 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 175 [6] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 26 b6 62 fb e0 00 Error: UNC at LBA = 0x26b662fb = 649487099 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 26 b6 62 fb e0 00 00:00:07.113 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 fa e0 00 00:00:07.111 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 f9 e0 00 00:00:07.108 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 f8 e0 00 00:00:07.106 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fe e0 00 00:00:07.104 READ VERIFY SECTOR(S) EXT Error 174 [5] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 26 b6 62 fa e0 00 Error: UNC at LBA = 0x26b662fa = 649487098 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 26 b6 62 fa e0 00 00:00:07.111 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 f9 e0 00 00:00:07.108 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 f8 e0 00 00:00:07.106 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fe e0 00 00:00:07.104 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fc e0 00 00:00:07.101 READ VERIFY SECTOR(S) EXT Error 173 [4] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 26 b6 62 f9 e0 00 Error: UNC at LBA = 0x26b662f9 = 649487097 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 26 b6 62 f9 e0 00 00:00:07.108 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 26 b6 62 f8 e0 00 00:00:07.106 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fe e0 00 00:00:07.104 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fc e0 00 00:00:07.101 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fa e0 00 00:00:07.099 READ VERIFY SECTOR(S) EXT Error 172 [3] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 26 b6 62 f8 e0 00 Error: UNC at LBA = 0x26b662f8 = 649487096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 26 b6 62 f8 e0 00 00:00:07.106 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fe e0 00 00:00:07.104 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fc e0 00 00:00:07.101 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fa e0 00 00:00:07.099 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 f8 e0 00 00:00:07.096 READ VERIFY SECTOR(S) EXT Error 171 [2] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 26 b6 62 fe e0 00 Error: UNC at LBA = 0x26b662fe = 649487102 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 26 b6 62 fe e0 00 00:00:07.104 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fc e0 00 00:00:07.101 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fa e0 00 00:00:07.099 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 f8 e0 00 00:00:07.096 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 fc e0 00 00:00:07.094 READ VERIFY SECTOR(S) EXT Error 170 [1] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 26 b6 62 fc e0 00 Error: UNC at LBA = 0x26b662fc = 649487100 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 26 b6 62 fc e0 00 00:00:07.101 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 fa e0 00 00:00:07.099 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 f8 e0 00 00:00:07.096 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 fc e0 00 00:00:07.094 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 f8 e0 00 00:00:07.092 READ VERIFY SECTOR(S) EXT Error 169 [0] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 26 b6 62 fa e0 00 Error: UNC at LBA = 0x26b662fa = 649487098 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 26 b6 62 fa e0 00 00:00:07.099 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 26 b6 62 f8 e0 00 00:00:07.096 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 fc e0 00 00:00:07.094 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 f8 e0 00 00:00:07.092 READ VERIFY SECTOR(S) EXT 42 00 00 00 08 00 00 26 b6 63 00 e0 00 00:00:07.092 READ VERIFY SECTOR(S) EXT Error 168 [7] occurred at disk power-on lifetime: 5387 hours (224 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 26 b6 62 f8 e0 00 Error: UNC at LBA = 0x26b662f8 = 649487096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 26 b6 62 f8 e0 00 00:00:07.096 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 fc e0 00 00:00:07.094 READ VERIFY SECTOR(S) EXT 42 00 00 00 04 00 00 26 b6 62 f8 e0 00 00:00:07.092 READ VERIFY SECTOR(S) EXT 42 00 00 00 08 00 00 26 b6 63 00 e0 00 00:00:07.092 READ VERIFY SECTOR(S) EXT 42 00 00 00 08 00 00 26 b6 62 f8 e0 00 00:00:07.089 READ VERIFY SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 5342 649487096 # 2 Short offline Completed: read failure 90% 5325 649487096 # 3 Short offline Completed: read failure 90% 5254 649487096 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 26/33 Celsius Lifetime Min/Max Temperature: 8/56 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (45) Index Estimated Time Temperature Celsius 46 2021-02-02 13:35 30 *********** 47 2021-02-02 13:40 31 ************ ... ..( 10 skipped). .. ************ 58 2021-02-02 14:35 31 ************ 59 2021-02-02 14:40 32 ************* ... ..( 30 skipped). .. ************* 90 2021-02-02 17:15 32 ************* 91 2021-02-02 17:20 33 ************** ... ..( 21 skipped). .. ************** 113 2021-02-02 19:10 33 ************** 114 2021-02-02 19:15 32 ************* ... ..( 18 skipped). .. ************* 5 2021-02-02 20:50 32 ************* 6 2021-02-02 20:55 31 ************ ... ..( 12 skipped). .. ************ 19 2021-02-02 22:00 31 ************ 20 2021-02-02 22:05 30 *********** 21 2021-02-02 22:10 31 ************ 22 2021-02-02 22:15 30 *********** 23 2021-02-02 22:20 31 ************ 24 2021-02-02 22:25 31 ************ 25 2021-02-02 22:30 30 *********** 26 2021-02-02 22:35 31 ************ 27 2021-02-02 22:40 31 ************ 28 2021-02-02 22:45 30 *********** ... ..( 16 skipped). .. *********** 45 2021-02-03 00:10 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific