/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-80JJ5T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Oct 20 20:13:54 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 74) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 199 051 - 0 3 Spin_Up_Time POS--K 141 129 021 - 1908 4 Start_Stop_Count -O--CK 034 034 000 - 66831 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3071 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1268 191 G-Sense_Error_Rate -O--CK 001 001 000 - 117 192 Power-Off_Retract_Count -O--CK 200 200 000 - 324 193 Load_Cycle_Count -O--CK 086 086 000 - 342905 194 Temperature_Celsius -O---K 113 099 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 991 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 991 [6] occurred at disk power-on lifetime: 573 hours (23 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 22 40 00 00:00:03.865 READ DMA EXT 25 03 03 00 01 00 00 00 00 00 22 40 00 00:00:03.863 READ DMA EXT 25 03 03 00 08 00 00 00 00 00 22 40 00 00:00:03.863 READ DMA EXT 25 03 03 00 01 00 00 00 00 00 22 40 00 00:00:03.862 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 22 40 00 00:00:03.861 FLUSH CACHE EXT Error 990 [5] occurred at disk power-on lifetime: 573 hours (23 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 80 40 00 00:00:03.769 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 00 40 00 00:00:03.766 READ DMA EXT 25 03 03 00 10 00 00 00 00 00 a2 40 00 00:00:03.723 READ DMA EXT 25 03 03 00 01 00 00 25 42 ea 8e 65 00 00:00:03.723 READ DMA EXT 25 03 03 00 08 00 00 00 00 00 00 40 00 00:00:03.722 READ DMA EXT Error 989 [4] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 22 40 00 00:00:03.887 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 29 40 00 00:00:03.885 FLUSH CACHE EXT 25 03 03 00 08 00 00 00 00 00 22 40 00 00:00:03.884 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 00 40 00 00:00:03.795 FLUSH CACHE EXT 25 03 03 00 01 00 00 00 00 00 00 40 00 00:00:03.794 READ DMA EXT Error 988 [3] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 80 40 00 00:00:03.744 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 00 40 00 00:00:03.742 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 07 40 00 00:00:03.686 FLUSH CACHE EXT 25 03 03 00 08 00 00 00 00 00 00 40 00 00:00:03.686 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 22 40 00 00:00:03.679 FLUSH CACHE EXT Error 987 [2] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 22 40 00 00:00:03.708 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 a2 40 00 00:00:03.706 READ DMA EXT 25 03 03 00 01 00 00 00 00 00 22 40 00 00:00:03.705 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 22 40 00 00:00:03.704 FLUSH CACHE EXT 25 03 03 00 01 00 00 00 00 00 22 40 00 00:00:03.704 READ DMA EXT Error 986 [1] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 80 40 00 00:00:03.607 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 00 40 00 00:00:03.605 READ DMA EXT 25 03 03 00 10 00 00 00 00 00 a2 40 00 00:00:03.562 READ DMA EXT 25 03 03 00 01 00 00 25 42 ea 8e 65 00 00:00:03.561 READ DMA EXT 25 03 03 00 08 00 00 00 00 00 00 40 00 00:00:03.561 READ DMA EXT Error 985 [0] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 22 40 00 00:00:03.724 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 a2 40 00 00:00:03.722 READ DMA EXT 25 03 03 00 01 00 00 00 00 00 23 40 00 00:00:03.722 READ DMA EXT ea 03 03 00 00 00 00 00 00 00 22 40 00 00:00:03.721 FLUSH CACHE EXT 25 03 03 00 01 00 00 00 00 00 22 40 00 00:00:03.720 READ DMA EXT Error 984 [23] occurred at disk power-on lifetime: 571 hours (23 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 00 00 a0 40 00 Error: UNC 128 sectors at LBA = 0x000000a0 = 160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 80 00 00 00 00 00 80 40 00 00:00:03.629 READ DMA EXT 25 03 03 00 80 00 00 00 00 00 00 40 00 00:00:03.626 READ DMA EXT 25 03 03 00 10 00 00 00 00 00 a2 40 00 00:00:03.584 READ DMA EXT 25 03 03 00 08 00 00 00 00 00 00 40 00 00:00:03.583 READ DMA EXT 25 03 03 00 01 00 00 25 42 ea 8e 65 00 00:00:03.583 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 18/30 Celsius Lifetime Min/Max Temperature: 5/44 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (47) Index Estimated Time Temperature Celsius 48 2022-10-20 18:06 33 ************** 49 2022-10-20 18:07 33 ************** 50 2022-10-20 18:08 ? - 51 2022-10-20 18:09 33 ************** 52 2022-10-20 18:10 ? - 53 2022-10-20 18:11 33 ************** 54 2022-10-20 18:12 33 ************** 55 2022-10-20 18:13 ? - 56 2022-10-20 18:14 33 ************** 57 2022-10-20 18:15 33 ************** 58 2022-10-20 18:16 ? - 59 2022-10-20 18:17 33 ************** 60 2022-10-20 18:18 33 ************** 61 2022-10-20 18:19 ? - 62 2022-10-20 18:20 33 ************** 63 2022-10-20 18:21 33 ************** 64 2022-10-20 18:22 ? - 65 2022-10-20 18:23 33 ************** 66 2022-10-20 18:24 ? - 67 2022-10-20 18:25 33 ************** 68 2022-10-20 18:26 34 *************** 69 2022-10-20 18:27 34 *************** 70 2022-10-20 18:28 34 *************** 71 2022-10-20 18:29 ? - 72 2022-10-20 18:30 34 *************** ... ..( 2 skipped). .. *************** 75 2022-10-20 18:33 34 *************** 76 2022-10-20 18:34 ? - 77 2022-10-20 18:35 35 **************** 78 2022-10-20 18:36 35 **************** 79 2022-10-20 18:37 ? - 80 2022-10-20 18:38 35 **************** 81 2022-10-20 18:39 ? - 82 2022-10-20 18:40 35 **************** 83 2022-10-20 18:41 35 **************** 84 2022-10-20 18:42 ? - 85 2022-10-20 18:43 35 **************** 86 2022-10-20 18:44 35 **************** 87 2022-10-20 18:45 ? - 88 2022-10-20 18:46 35 **************** 89 2022-10-20 18:47 ? - 90 2022-10-20 18:48 35 **************** ... ..( 6 skipped). .. **************** 97 2022-10-20 18:55 35 **************** 98 2022-10-20 18:56 ? - 99 2022-10-20 18:57 35 **************** 100 2022-10-20 18:58 ? - 101 2022-10-20 18:59 35 **************** 102 2022-10-20 19:00 35 **************** 103 2022-10-20 19:01 ? - 104 2022-10-20 19:02 35 **************** ... ..( 3 skipped). .. **************** 108 2022-10-20 19:06 35 **************** 109 2022-10-20 19:07 ? - 110 2022-10-20 19:08 31 ************ 111 2022-10-20 19:09 31 ************ 112 2022-10-20 19:10 32 ************* 113 2022-10-20 19:11 32 ************* 114 2022-10-20 19:12 32 ************* 115 2022-10-20 19:13 33 ************** 116 2022-10-20 19:14 33 ************** 117 2022-10-20 19:15 33 ************** 118 2022-10-20 19:16 34 *************** 119 2022-10-20 19:17 34 *************** 120 2022-10-20 19:18 34 *************** 121 2022-10-20 19:19 35 **************** 122 2022-10-20 19:20 35 **************** 123 2022-10-20 19:21 ? - 124 2022-10-20 19:22 35 **************** ... ..( 3 skipped). .. **************** 0 2022-10-20 19:26 35 **************** 1 2022-10-20 19:27 ? - 2 2022-10-20 19:28 35 **************** 3 2022-10-20 19:29 35 **************** 4 2022-10-20 19:30 ? - 5 2022-10-20 19:31 35 **************** 6 2022-10-20 19:32 35 **************** 7 2022-10-20 19:33 ? - 8 2022-10-20 19:34 35 **************** ... ..( 7 skipped). .. **************** 16 2022-10-20 19:42 35 **************** 17 2022-10-20 19:43 ? - 18 2022-10-20 19:44 17 - 19 2022-10-20 19:45 17 - 20 2022-10-20 19:46 ? - 21 2022-10-20 19:47 17 - 22 2022-10-20 19:48 17 - 23 2022-10-20 19:49 ? - 24 2022-10-20 19:50 17 - 25 2022-10-20 19:51 ? - 26 2022-10-20 19:52 18 - 27 2022-10-20 19:53 19 - 28 2022-10-20 19:54 20 * 29 2022-10-20 19:55 21 ** 30 2022-10-20 19:56 21 ** 31 2022-10-20 19:57 22 *** 32 2022-10-20 19:58 23 **** 33 2022-10-20 19:59 23 **** 34 2022-10-20 20:00 24 ***** 35 2022-10-20 20:01 ? - 36 2022-10-20 20:02 25 ****** 37 2022-10-20 20:03 25 ****** 38 2022-10-20 20:04 26 ******* 39 2022-10-20 20:05 26 ******* 40 2022-10-20 20:06 27 ******** 41 2022-10-20 20:07 27 ******** 42 2022-10-20 20:08 27 ******** 43 2022-10-20 20:09 28 ********* 44 2022-10-20 20:10 29 ********** 45 2022-10-20 20:11 29 ********** 46 2022-10-20 20:12 30 *********** 47 2022-10-20 20:13 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1192 Vendor specific