/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 3.5 Device Model: ST1000DM010-2EP102 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Mar 31 02:42:52 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 109) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 083 063 006 - 226656928 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5273 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 082 060 045 - 178661032 9 Power_On_Hours -O--CK 097 097 000 - 2819 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3325 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 001 000 - 0 0 65535 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 072 058 040 - 28 (Min/Max 18/28) 193 Load_Cycle_Count -O--CK 098 098 000 - 5376 194 Temperature_Celsius -O---K 028 007 000 - 28 (0 7 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 002 001 000 - 226656928 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 2602h+15m+34.737s 241 Total_LBAs_Written ------ 100 253 000 - 42739592595 242 Total_LBAs_Read ------ 100 253 000 - 53466039132 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4120 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4800 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1888 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 19/28 Celsius Lifetime Min/Max Temperature: 8/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3325 --- Lifetime Power-On Resets 0x01 0x010 4 2819 --- Power-on Hours 0x01 0x018 6 42829959197 --- Logical Sectors Written 0x01 0x020 6 416589881 --- Number of Write Commands 0x01 0x028 6 53797711730 --- Logical Sectors Read 0x01 0x030 6 511731481 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 13 --- Spindle Motor Power-on Hours 0x03 0x010 4 13 --- Head Flying Hours 0x03 0x018 4 5376 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 364995 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 26 --- Average Short Term Temperature 0x05 0x018 1 25 --- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 9 --- Lowest Temperature 0x05 0x030 1 38 --- Highest Average Short Term Temperature 0x05 0x038 1 22 --- Lowest Average Short Term Temperature 0x05 0x040 1 37 --- Highest Average Long Term Temperature 0x05 0x048 1 23 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST31000333AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SD35 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Mar 31 02:42:52 2021 EDT ==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207951en http://knowledge.seagate.com/articles/en_US/FAQ/207957en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 625) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 208) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 86949018 3 Spin_Up_Time PO---- 093 091 000 - 0 4 Start_Stop_Count -O--CK 090 090 020 - 10482 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 78 7 Seek_Error_Rate POSR-- 084 060 030 - 237682045 9 Power_On_Hours -O--CK 092 092 000 - 7687 10 Spin_Retry_Count PO--C- 100 100 097 - 84 12 Power_Cycle_Count -O--CK 092 037 020 - 9138 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 095 095 000 - 5 188 Command_Timeout -O--CK 100 098 000 - 17182228567 189 High_Fly_Writes -O-RCK 001 001 000 - 2226 190 Airflow_Temperature_Cel -O---K 067 044 045 Past 33 (0 40 33 19 0) 194 Temperature_Celsius -O---K 033 056 000 - 33 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 040 021 000 - 86949018 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:33.602 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT Error 4 [3] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT 25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT 25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT Error 2 [1] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT 25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT 60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED 60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED 60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED 60 00 00 00 08 00 00 5a 00 b3 40 40 00 00:02:17.864 READ FPDMA QUEUED 60 00 00 00 08 00 00 44 00 b3 70 40 00 00:02:17.864 READ FPDMA QUEUED 60 00 00 00 08 00 00 32 00 b4 a0 40 00 00:02:17.864 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7330 - # 2 Extended offline Aborted by host 90% 7330 - # 3 Short offline Completed without error 00% 6773 - # 4 Extended offline Interrupted (host reset) 00% 6074 - # 5 Short offline Aborted by host 90% 1772 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 19/32 Celsius Lifetime Min/Max Temperature: 10/56 Celsius Under/Over Temperature Limit Count: 0/29 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (61) Index Estimated Time Temperature Celsius 62 2021-03-31 00:35 37 ****************** ... ..( 26 skipped). .. ****************** 89 2021-03-31 01:02 37 ****************** 90 2021-03-31 01:03 36 ***************** 91 2021-03-31 01:04 37 ****************** 92 2021-03-31 01:05 36 ***************** ... ..( 2 skipped). .. ***************** 95 2021-03-31 01:08 36 ***************** 96 2021-03-31 01:09 37 ****************** 97 2021-03-31 01:10 37 ****************** 98 2021-03-31 01:11 37 ****************** 99 2021-03-31 01:12 36 ***************** 100 2021-03-31 01:13 36 ***************** 101 2021-03-31 01:14 36 ***************** 102 2021-03-31 01:15 37 ****************** 103 2021-03-31 01:16 36 ***************** ... ..( 3 skipped). .. ***************** 107 2021-03-31 01:20 36 ***************** 108 2021-03-31 01:21 37 ****************** 109 2021-03-31 01:22 36 ***************** ... ..( 8 skipped). .. ***************** 118 2021-03-31 01:31 36 ***************** 119 2021-03-31 01:32 ? - 120 2021-03-31 01:33 36 ***************** 121 2021-03-31 01:34 36 ***************** 122 2021-03-31 01:35 37 ****************** ... ..( 2 skipped). .. ****************** 125 2021-03-31 01:38 37 ****************** 126 2021-03-31 01:39 38 ******************* ... ..( 12 skipped). .. ******************* 11 2021-03-31 01:52 38 ******************* 12 2021-03-31 01:53 ? - 13 2021-03-31 01:54 38 ******************* ... ..( 8 skipped). .. ******************* 22 2021-03-31 02:03 38 ******************* 23 2021-03-31 02:04 37 ****************** ... ..( 7 skipped). .. ****************** 31 2021-03-31 02:12 37 ****************** 32 2021-03-31 02:13 ? - 33 2021-03-31 02:14 19 - 34 2021-03-31 02:15 20 * 35 2021-03-31 02:16 21 ** 36 2021-03-31 02:17 21 ** 37 2021-03-31 02:18 22 *** 38 2021-03-31 02:19 23 **** 39 2021-03-31 02:20 24 ***** 40 2021-03-31 02:21 24 ***** 41 2021-03-31 02:22 25 ****** 42 2021-03-31 02:23 26 ******* 43 2021-03-31 02:24 26 ******* 44 2021-03-31 02:25 27 ******** 45 2021-03-31 02:26 27 ******** 46 2021-03-31 02:27 28 ********* 47 2021-03-31 02:28 28 ********* 48 2021-03-31 02:29 29 ********** 49 2021-03-31 02:30 29 ********** 50 2021-03-31 02:31 29 ********** 51 2021-03-31 02:32 30 *********** 52 2021-03-31 02:33 30 *********** 53 2021-03-31 02:34 30 *********** 54 2021-03-31 02:35 31 ************ 55 2021-03-31 02:36 31 ************ 56 2021-03-31 02:37 31 ************ 57 2021-03-31 02:38 32 ************* ... ..( 3 skipped). .. ************* 61 2021-03-31 02:42 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/ada2 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVS-22UST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Wed Mar 31 02:42:53 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 6 3 Spin_Up_Time PO---- 189 170 021 - 1516 4 Start_Stop_Count -O--CK 090 090 000 - 10050 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8582 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 8867 192 Power-Off_Retract_Count -O--CK 197 197 000 - 2569 193 Load_Cycle_Count -O--CK 136 136 000 - 193610 194 Temperature_Celsius -O---K 121 093 000 - 26 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 100 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 11 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 40 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b7 25 15 35 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 10 15 b7 00 35 2f 00 00 00 00:00:57.920 NOP [Abort queued commands] 17 12 60 15 26 00 70 00 e2 40 00 00 17 00:23:06.002 RECALIBRATE [RET-4] 00 60 40 00 62 15 11 17 26 60 00 00 00 00:00:41.576 NOP [Reserved subcommand] [OBS-ACS-2] Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 12 60 15 26 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 68 40 00 a2 15 12 17 26 60 00 00 00 00:00:57.968 NOP [Reserved subcommand] [OBS-ACS-2] 17 11 60 15 26 00 60 00 62 40 00 00 17 00:23:06.001 RECALIBRATE [RET-4] 00 50 40 00 e2 15 10 17 26 60 00 00 00 00:00:08.792 NOP [Reserved subcommand] [OBS-ACS-2] Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 18 60 01 a4 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 e8 40 00 a2 01 17 17 a4 60 00 00 00 00:00:58.096 NOP [Reserved subcommand] [OBS-ACS-2] 17 15 60 01 a4 00 e0 00 62 40 00 00 17 00:01:47.542 RECALIBRATE [RET-4] 00 d0 40 00 e2 01 14 17 a4 60 00 00 00 00:00:08.920 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5684 - # 2 Short offline Aborted by host 90% 5604 - # 3 Short offline Aborted by host 90% 5585 - # 4 Short offline Aborted by host 90% 5537 - # 5 Short offline Aborted by host 90% 5364 - # 6 Short offline Aborted by host 90% 5364 - # 7 Short offline Aborted by host 90% 5364 - # 8 Short offline Aborted by host 90% 5364 - # 9 Short offline Aborted by host 90% 5364 - #10 Short offline Aborted by host 90% 5364 - #11 Short offline Aborted by host 90% 5364 - #12 Short offline Aborted by host 90% 5364 - #13 Short offline Aborted by host 90% 5364 - #14 Short offline Aborted by host 90% 5364 - #15 Short offline Aborted by host 90% 5364 - #16 Short offline Aborted by host 90% 5364 - #17 Short offline Aborted by host 90% 5364 - #18 Short offline Aborted by host 90% 5364 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 19/26 Celsius Lifetime Min/Max Temperature: 19/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (48) Index Estimated Time Temperature Celsius 49 2021-03-31 00:35 27 ******** ... ..( 15 skipped). .. ******** 65 2021-03-31 00:51 27 ******** 66 2021-03-31 00:52 ? - 67 2021-03-31 00:53 28 ********* 68 2021-03-31 00:54 ? - 69 2021-03-31 00:55 19 - 70 2021-03-31 00:56 21 ** 71 2021-03-31 00:57 22 *** 72 2021-03-31 00:58 23 **** 73 2021-03-31 00:59 23 **** 74 2021-03-31 01:00 25 ****** 75 2021-03-31 01:01 26 ******* ... ..( 2 skipped). .. ******* 78 2021-03-31 01:04 26 ******* 79 2021-03-31 01:05 27 ******** ... ..( 4 skipped). .. ******** 84 2021-03-31 01:10 27 ******** 85 2021-03-31 01:11 28 ********* 86 2021-03-31 01:12 27 ******** 87 2021-03-31 01:13 27 ******** 88 2021-03-31 01:14 27 ******** 89 2021-03-31 01:15 28 ********* ... ..( 4 skipped). .. ********* 94 2021-03-31 01:20 28 ********* 95 2021-03-31 01:21 29 ********** ... ..( 9 skipped). .. ********** 105 2021-03-31 01:31 29 ********** 106 2021-03-31 01:32 28 ********* 107 2021-03-31 01:33 28 ********* 108 2021-03-31 01:34 29 ********** 109 2021-03-31 01:35 ? - 110 2021-03-31 01:36 32 ************* 111 2021-03-31 01:37 31 ************ 112 2021-03-31 01:38 30 *********** ... ..( 4 skipped). .. *********** 117 2021-03-31 01:43 30 *********** 118 2021-03-31 01:44 29 ********** ... ..( 3 skipped). .. ********** 122 2021-03-31 01:48 29 ********** 123 2021-03-31 01:49 ? - 124 2021-03-31 01:50 29 ********** ... ..( 2 skipped). .. ********** 127 2021-03-31 01:53 29 ********** 0 2021-03-31 01:54 ? - 1 2021-03-31 01:55 29 ********** 2 2021-03-31 01:56 ? - 3 2021-03-31 01:57 29 ********** 4 2021-03-31 01:58 29 ********** 5 2021-03-31 01:59 29 ********** 6 2021-03-31 02:00 30 *********** 7 2021-03-31 02:01 30 *********** 8 2021-03-31 02:02 31 ************ ... ..( 3 skipped). .. ************ 12 2021-03-31 02:06 31 ************ 13 2021-03-31 02:07 32 ************* 14 2021-03-31 02:08 31 ************ 15 2021-03-31 02:09 31 ************ 16 2021-03-31 02:10 30 *********** ... ..( 2 skipped). .. *********** 19 2021-03-31 02:13 30 *********** 20 2021-03-31 02:14 ? - 21 2021-03-31 02:15 19 - 22 2021-03-31 02:16 19 - 23 2021-03-31 02:17 20 * 24 2021-03-31 02:18 21 ** 25 2021-03-31 02:19 21 ** 26 2021-03-31 02:20 22 *** ... ..( 2 skipped). .. *** 29 2021-03-31 02:23 22 *** 30 2021-03-31 02:24 23 **** ... ..( 2 skipped). .. **** 33 2021-03-31 02:27 23 **** 34 2021-03-31 02:28 24 ***** 35 2021-03-31 02:29 24 ***** 36 2021-03-31 02:30 24 ***** 37 2021-03-31 02:31 25 ****** ... ..( 8 skipped). .. ****** 46 2021-03-31 02:40 25 ****** 47 2021-03-31 02:41 26 ******* 48 2021-03-31 02:42 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1694 Vendor specific /dev/da1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD1600AAJS-00WAA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 58.01D58 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Mar 31 02:42:53 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 52) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 152 148 021 - 3358 4 Start_Stop_Count -O--CK 091 091 000 - 9131 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 099 099 000 - 878 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1640 192 Power-Off_Retract_Count -O--CK 199 199 000 - 979 193 Load_Cycle_Count -O--CK 197 197 000 - 9131 194 Temperature_Celsius -O---K 109 095 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 1 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2365 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2365 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 86 25 2c 99 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 16 2c 86 11 99 35 00 00 00 00:00:05.889 NOP [Reserved subcommand] [OBS-ACS-2] 11 05 25 2c 8e 00 01 00 16 20 00 00 11 00:48:42.886 RECALIBRATE [RET-4] 00 01 20 00 16 2c 04 11 8e 25 00 00 00 00:00:05.889 NOP [Reserved subcommand] [OBS-ACS-2] Error 2364 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 05 25 2c 8e 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 16 2c 04 11 8e 25 00 00 00 00:00:05.889 NOP [Reserved subcommand] [OBS-ACS-2] 11 04 35 2c 8e 00 01 00 16 20 00 00 11 00:48:39.940 RECALIBRATE [RET-4] 00 01 20 00 16 2c 03 11 8e 35 00 00 00 00:00:05.377 NOP [Reserved subcommand] [OBS-ACS-2] Error 2363 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 04 25 2c 82 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 15 2c 04 11 82 35 00 00 00 00:00:05.633 NOP [Reserved subcommand] [OBS-ACS-2] 11 78 25 2c 75 00 01 00 15 20 00 00 11 00:48:36.868 RECALIBRATE [RET-4] 00 01 20 00 15 2c 76 11 75 25 00 00 00 00:00:05.633 NOP [Reserved subcommand] [OBS-ACS-2] Error 2362 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 78 25 2c 75 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 15 2c 76 11 75 25 00 00 00 00:00:05.633 NOP [Reserved subcommand] [OBS-ACS-2] 11 76 35 2c 75 00 01 00 15 20 00 00 11 00:48:33.654 RECALIBRATE [RET-4] 00 01 20 00 15 2c 76 11 75 35 00 00 00 00:00:05.121 NOP [Reserved subcommand] [OBS-ACS-2] Error 2361 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 aa 25 2c 64 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 14 2c 62 11 5f 25 00 00 00 00:00:05.377 NOP [Reserved subcommand] [OBS-ACS-2] 11 0d 25 2c 5c 00 01 00 13 20 00 00 11 00:48:27.994 RECALIBRATE [RET-4] 00 01 20 00 11 2c 0c 11 5c 25 00 00 00 00:00:04.609 NOP [Reserved subcommand] [OBS-ACS-2] Error 2360 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 87 25 2c 4f 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 10 2c 87 11 4f 35 00 00 00 00:00:04.353 NOP [Reserved subcommand] [OBS-ACS-2] 11 8a 25 2c 43 00 01 00 10 20 00 00 11 00:48:23.943 RECALIBRATE [RET-4] 00 01 20 00 10 2c 89 11 43 25 00 00 00 00:00:04.353 NOP [Reserved subcommand] [OBS-ACS-2] Error 2359 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 8a 25 2c 43 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 20 00 10 2c 89 11 43 25 00 00 00 00:00:04.353 NOP [Reserved subcommand] [OBS-ACS-2] 11 87 25 2c 43 00 01 00 0f 20 00 00 11 00:48:20.872 RECALIBRATE [RET-4] 00 01 20 00 0d 2c 87 11 43 25 00 00 00 00:00:03.585 NOP [Reserved subcommand] [OBS-ACS-2] Error 2358 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 7f 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 2e 25 2c 34 00 00 00 00 00 00 00 11 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 7f 20 00 37 2c 2d 11 34 25 00 00 00 00:00:46.719 NOP [Reserved subcommand] [OBS-ACS-2] 11 2a 25 2c 34 00 7f 00 b8 20 00 00 11 00:48:16.939 RECALIBRATE [RET-4] 00 7f 20 00 ba 2c 29 11 34 25 00 00 00 00:00:14.719 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 10% 748 289073688 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 19/34 Celsius Lifetime Min/Max Temperature: 32/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/85 Celsius Temperature History Size (Index): 128 (87) Index Estimated Time Temperature Celsius 88 2021-03-31 00:35 ? - 89 2021-03-31 00:36 36 ***************** ... ..( 4 skipped). .. ***************** 94 2021-03-31 00:41 36 ***************** 95 2021-03-31 00:42 37 ****************** 96 2021-03-31 00:43 37 ****************** 97 2021-03-31 00:44 36 ***************** ... ..( 3 skipped). .. ***************** 101 2021-03-31 00:48 36 ***************** 102 2021-03-31 00:49 37 ****************** ... ..( 50 skipped). .. ****************** 25 2021-03-31 01:40 37 ****************** 26 2021-03-31 01:41 ? - 27 2021-03-31 01:42 38 ******************* 28 2021-03-31 01:43 38 ******************* 29 2021-03-31 01:44 ? - 30 2021-03-31 01:45 38 ******************* 31 2021-03-31 01:46 37 ****************** 32 2021-03-31 01:47 ? - 33 2021-03-31 01:48 38 ******************* 34 2021-03-31 01:49 ? - 35 2021-03-31 01:50 38 ******************* 36 2021-03-31 01:51 37 ****************** 37 2021-03-31 01:52 37 ****************** 38 2021-03-31 01:53 ? - 39 2021-03-31 01:54 33 ************** 40 2021-03-31 01:55 ? - 41 2021-03-31 01:56 19 - 42 2021-03-31 01:57 ? - 43 2021-03-31 01:58 20 * 44 2021-03-31 01:59 20 * 45 2021-03-31 02:00 21 ** 46 2021-03-31 02:01 21 ** 47 2021-03-31 02:02 22 *** 48 2021-03-31 02:03 23 **** 49 2021-03-31 02:04 24 ***** 50 2021-03-31 02:05 25 ****** 51 2021-03-31 02:06 ? - 52 2021-03-31 02:07 19 - 53 2021-03-31 02:08 ? - 54 2021-03-31 02:09 20 * 55 2021-03-31 02:10 20 * 56 2021-03-31 02:11 21 ** 57 2021-03-31 02:12 21 ** 58 2021-03-31 02:13 22 *** 59 2021-03-31 02:14 23 **** 60 2021-03-31 02:15 24 ***** 61 2021-03-31 02:16 25 ****** 62 2021-03-31 02:17 26 ******* 63 2021-03-31 02:18 27 ******** 64 2021-03-31 02:19 28 ********* 65 2021-03-31 02:20 28 ********* 66 2021-03-31 02:21 29 ********** 67 2021-03-31 02:22 29 ********** 68 2021-03-31 02:23 30 *********** 69 2021-03-31 02:24 30 *********** 70 2021-03-31 02:25 30 *********** 71 2021-03-31 02:26 31 ************ 72 2021-03-31 02:27 31 ************ 73 2021-03-31 02:28 ? - 74 2021-03-31 02:29 32 ************* 75 2021-03-31 02:30 ? - 76 2021-03-31 02:31 32 ************* ... ..( 4 skipped). .. ************* 81 2021-03-31 02:36 32 ************* 82 2021-03-31 02:37 33 ************** 83 2021-03-31 02:38 33 ************** 84 2021-03-31 02:39 33 ************** 85 2021-03-31 02:40 34 *************** 86 2021-03-31 02:41 34 *************** 87 2021-03-31 02:42 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1690 Vendor specific