/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO mSATA 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT41B6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 7 11:03:58 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 9494 12 Power_Cycle_Count -O--CK 099 099 000 - 179 177 Wear_Leveling_Count PO--C- 097 097 000 - 48 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 032 028 000 - 68 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 116 241 Total_LBAs_Written -O--CK 099 099 000 - 13687005626 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 67 Celsius Power Cycle Min/Max Temperature: 60/70 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (48) Index Estimated Time Temperature Celsius 49 2023-01-06 13:50 67 ***************************************+ 50 2023-01-06 14:00 67 ***************************************+ 51 2023-01-06 14:10 67 ***************************************+ 52 2023-01-06 14:20 63 ***************************************+ 53 2023-01-06 14:30 61 ***************************************+ 54 2023-01-06 14:40 61 ***************************************+ 55 2023-01-06 14:50 61 ***************************************+ 56 2023-01-06 15:00 63 ***************************************+ 57 2023-01-06 15:10 67 ***************************************+ ... ..( 20 skipped). .. ***************************************+ 78 2023-01-06 18:40 67 ***************************************+ 79 2023-01-06 18:50 61 ***************************************+ 80 2023-01-06 19:00 60 ***************************************+ 81 2023-01-06 19:10 66 ***************************************+ ... ..( 2 skipped). .. ***************************************+ 84 2023-01-06 19:40 66 ***************************************+ 85 2023-01-06 19:50 67 ***************************************+ ... ..( 6 skipped). .. ***************************************+ 92 2023-01-06 21:00 67 ***************************************+ 93 2023-01-06 21:10 68 ***************************************+ 94 2023-01-06 21:20 67 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 98 2023-01-06 22:00 67 ***************************************+ 99 2023-01-06 22:10 68 ***************************************+ 100 2023-01-06 22:20 67 ***************************************+ 101 2023-01-06 22:30 67 ***************************************+ 102 2023-01-06 22:40 62 ***************************************+ 103 2023-01-06 22:50 62 ***************************************+ 104 2023-01-06 23:00 61 ***************************************+ 105 2023-01-06 23:10 67 ***************************************+ 106 2023-01-06 23:20 67 ***************************************+ 107 2023-01-06 23:30 67 ***************************************+ 108 2023-01-06 23:40 68 ***************************************+ 109 2023-01-06 23:50 68 ***************************************+ 110 2023-01-07 00:00 64 ***************************************+ 111 2023-01-07 00:10 68 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 115 2023-01-07 00:50 68 ***************************************+ 116 2023-01-07 01:00 67 ***************************************+ 117 2023-01-07 01:10 68 ***************************************+ 118 2023-01-07 01:20 68 ***************************************+ 119 2023-01-07 01:30 67 ***************************************+ 120 2023-01-07 01:40 67 ***************************************+ 121 2023-01-07 01:50 68 ***************************************+ 122 2023-01-07 02:00 68 ***************************************+ 123 2023-01-07 02:10 69 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 127 2023-01-07 02:50 69 ***************************************+ 0 2023-01-07 03:00 68 ***************************************+ 1 2023-01-07 03:10 69 ***************************************+ 2 2023-01-07 03:20 68 ***************************************+ 3 2023-01-07 03:30 69 ***************************************+ 4 2023-01-07 03:40 68 ***************************************+ ... ..( 7 skipped). .. ***************************************+ 12 2023-01-07 05:00 68 ***************************************+ 13 2023-01-07 05:10 69 ***************************************+ 14 2023-01-07 05:20 68 ***************************************+ ... ..( 23 skipped). .. ***************************************+ 38 2023-01-07 09:20 68 ***************************************+ 39 2023-01-07 09:30 67 ***************************************+ 40 2023-01-07 09:40 67 ***************************************+ 41 2023-01-07 09:50 68 ***************************************+ 42 2023-01-07 10:00 67 ***************************************+ 43 2023-01-07 10:10 68 ***************************************+ 44 2023-01-07 10:20 67 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 48 2023-01-07 11:00 67 ***************************************+ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC