/dev/sd0c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD10JPVX-08JC3T5 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.01A05 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 20 06:13:04 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18420) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 206) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3 3 Spin_Up_Time 0x0027 183 179 021 Pre-fail Always - 1808 4 Start_Stop_Count 0x0032 089 089 000 Old_age Always - 11200 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16295 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5667 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 125 193 Load_Cycle_Count 0x0032 073 073 000 Old_age Always - 383078 194 Temperature_Celsius 0x0022 111 093 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 240 Head_Flying_Hours 0x0032 079 079 000 Old_age Always - 15898 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 14074 - # 2 Short offline Aborted by host 10% 14074 - # 3 Short offline Aborted by host 10% 13787 - # 4 Vendor (0x50) Completed without error 00% 12893 - # 5 Short offline Aborted by host 10% 12893 - # 6 Vendor (0x50) Aborted by host 10% 12220 - # 7 Short offline Aborted by host 10% 12220 - # 8 Vendor (0x50) Completed without error 00% 11474 - # 9 Short offline Aborted by host 10% 11474 - #10 Short offline Aborted by host 90% 10027 - #11 Vendor (0x50) Completed without error 00% 9161 - #12 Short offline Aborted by host 10% 9161 - #13 Vendor (0x50) Completed without error 00% 8866 - #14 Short offline Aborted by host 10% 8866 - #15 Vendor (0x50) Completed without error 00% 5432 - #16 Short offline Completed without error 00% 5432 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. /dev/sd1c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: TS256GMTS400 Serial Number: -- Firmware Version: O1225G User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 20 06:13:04 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 341 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 3579 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 142 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 23 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 59281 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 106 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 1 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 28 168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000 169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 25 178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 33 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 44 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 6838 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 135233 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 165339 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 237124 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. /dev/sd2c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SanDisk based SSDs Device Model: SanDisk SSD U110 16GB Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: U21B001 User Capacity: 16,013,942,784 bytes [16.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 20 06:13:04 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 16933 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 6609 171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 1999 174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 258 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 6663 232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 5029 241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 9759497398 242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 2988911792 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14707 - # 2 Short offline Completed without error 00% 13547 - # 3 Short offline Completed without error 00% 12933 - # 4 Short offline Completed without error 00% 12305 - # 5 Short offline Completed without error 00% 10164 - # 6 Short offline Completed without error 00% 9871 - # 7 Short offline Completed without error 00% 6532 - # 8 Short offline Completed without error 00% 730 - # 9 Short offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 65535 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 18446744073709551615 18446744073709551615 Not_testing 2 18446744073709551615 18446744073709551615 Not_testing 3 18446744073709551615 18446744073709551615 Not_testing 4 18446744073709551615 18446744073709551615 Not_testing 5 18446744073709551615 18446744073709551615 Not_testing 65535 18446744073709551615 65534 Read_scanning was never started Selective self-test flags (0xffff): Currently read-scanning the remainder of the disk. If Selective self-test is pending on power-up, resume after 65535 minute delay. /dev/sd3c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: OPENBSD Product: SR CRYPTO Revision: 006 User Capacity: 161,062,281,216 bytes [161 GB] Logical block size: 512 bytes >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.