/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD1600JS-75NCB2 Serial Number: -- Firmware Version: 10.02E03 User Capacity: 160,000,000,000 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Jan 8 01:39:22 2025 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 1 3 Spin_Up_Time PO---- 188 172 021 - 3575 4 Start_Stop_Count -O--CK 094 094 000 - 6232 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 023 023 000 - 56232 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6172 190 Airflow_Temperature_Cel -O---K 052 041 045 Past 48 194 Temperature_Celsius -O---K 099 088 000 - 48 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 1 198 Offline_Uncorrectable ----C- 200 200 000 - 1 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 81 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 81 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 00 00 0d 00 53 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 5c b0 e7 c4 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 d5 00 e0 e7 5c 00 c4 b0 00 00 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2] 00 21 c8 e7 c4 00 01 00 00 00 00 00 03 04:13:09.068 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 f0 e7 16 03 c4 c8 00 00 00 00:00:12.384 NOP [Abort queued commands] Error 80 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b5 c8 05 c9 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 69 07 c2 c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 82 c8 05 b3 00 01 00 17 00 00 00 07 00:06:15.498 [RESERVED] 00 01 00 00 17 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] Error 79 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 69 c8 05 c2 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 ca 07 ba c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 17 00 00 00 07 00:06:13.634 [RESERVED] 00 01 00 00 16 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] Error 78 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 ca c8 05 ba 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 82 07 b3 c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 17 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 15 05 28 07 ac c8 00 00 00 00:00:05.633 NOP [Abort queued commands] Error 77 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 82 c8 05 b3 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 16 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 14 05 28 07 ac c8 00 00 00 00:00:05.377 NOP [Abort queued commands] Error 76 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 28 c8 05 ac 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 16 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 15 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 13 05 28 07 ac c8 00 00 00 00:00:05.121 NOP [Abort queued commands] Error 75 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 73 c8 05 8d 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 c0 05 1b 07 86 c8 00 00 00 00:00:49.280 NOP [Abort queued commands] 07 0f c8 05 77 00 80 00 c0 00 00 00 07 00:06:00.139 [RESERVED] 00 80 00 00 c0 05 b4 07 6f c8 00 00 00 00:00:49.280 NOP [Abort queued commands] Error 74 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 1b c8 05 86 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 c0 05 cb 07 7e c8 00 00 00 00:00:49.280 NOP [Abort queued commands] 07 b4 c8 05 6f 00 80 00 c0 00 00 00 07 00:05:58.159 [RESERVED] 00 40 00 00 40 05 af 07 6f c8 00 00 00 00:00:49.280 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 50 Celsius Power Cycle Min/Max Temperature: --/53 Celsius Lifetime Min/Max Temperature: --/60 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/60 Celsius Temperature History Size (Index): 128 (30) Index Estimated Time Temperature Celsius 31 2025-01-07 23:32 50 ******************************* 32 2025-01-07 23:33 50 ******************************* 33 2025-01-07 23:34 52 ********************************* 34 2025-01-07 23:35 52 ********************************* 35 2025-01-07 23:36 53 ********************************** 36 2025-01-07 23:37 53 ********************************** 37 2025-01-07 23:38 53 ********************************** 38 2025-01-07 23:39 50 ******************************* 39 2025-01-07 23:40 50 ******************************* 40 2025-01-07 23:41 48 ***************************** 41 2025-01-07 23:42 50 ******************************* 42 2025-01-07 23:43 49 ****************************** 43 2025-01-07 23:44 51 ******************************** 44 2025-01-07 23:45 51 ******************************** 45 2025-01-07 23:46 53 ********************************** ... ..( 6 skipped). .. ********************************** 52 2025-01-07 23:53 53 ********************************** 53 2025-01-07 23:54 50 ******************************* 54 2025-01-07 23:55 50 ******************************* 55 2025-01-07 23:56 50 ******************************* 56 2025-01-07 23:57 53 ********************************** 57 2025-01-07 23:58 53 ********************************** 58 2025-01-07 23:59 52 ********************************* 59 2025-01-08 00:00 52 ********************************* 60 2025-01-08 00:01 52 ********************************* 61 2025-01-08 00:02 53 ********************************** ... ..( 3 skipped). .. ********************************** 65 2025-01-08 00:06 53 ********************************** 66 2025-01-08 00:07 52 ********************************* 67 2025-01-08 00:08 52 ********************************* 68 2025-01-08 00:09 52 ********************************* 69 2025-01-08 00:10 53 ********************************** 70 2025-01-08 00:11 53 ********************************** 71 2025-01-08 00:12 53 ********************************** 72 2025-01-08 00:13 51 ******************************** 73 2025-01-08 00:14 51 ******************************** 74 2025-01-08 00:15 51 ******************************** 75 2025-01-08 00:16 53 ********************************** ... ..( 4 skipped). .. ********************************** 80 2025-01-08 00:21 53 ********************************** 81 2025-01-08 00:22 50 ******************************* 82 2025-01-08 00:23 50 ******************************* 83 2025-01-08 00:24 48 ***************************** 84 2025-01-08 00:25 49 ****************************** 85 2025-01-08 00:26 48 ***************************** 86 2025-01-08 00:27 49 ****************************** ... ..( 3 skipped). .. ****************************** 90 2025-01-08 00:31 49 ****************************** 91 2025-01-08 00:32 50 ******************************* 92 2025-01-08 00:33 49 ****************************** 93 2025-01-08 00:34 48 ***************************** 94 2025-01-08 00:35 48 ***************************** 95 2025-01-08 00:36 50 ******************************* 96 2025-01-08 00:37 53 ********************************** ... ..( 4 skipped). .. ********************************** 101 2025-01-08 00:42 53 ********************************** 102 2025-01-08 00:43 52 ********************************* 103 2025-01-08 00:44 52 ********************************* 104 2025-01-08 00:45 50 ******************************* 105 2025-01-08 00:46 50 ******************************* 106 2025-01-08 00:47 50 ******************************* 107 2025-01-08 00:48 53 ********************************** 108 2025-01-08 00:49 53 ********************************** 109 2025-01-08 00:50 52 ********************************* ... ..( 3 skipped). .. ********************************* 113 2025-01-08 00:54 52 ********************************* 114 2025-01-08 00:55 50 ******************************* 115 2025-01-08 00:56 48 ***************************** 116 2025-01-08 00:57 47 **************************** 117 2025-01-08 00:58 48 ***************************** 118 2025-01-08 00:59 50 ******************************* 119 2025-01-08 01:00 51 ******************************** 120 2025-01-08 01:01 53 ********************************** 121 2025-01-08 01:02 51 ******************************** 122 2025-01-08 01:03 49 ****************************** 123 2025-01-08 01:04 49 ****************************** 124 2025-01-08 01:05 50 ******************************* 125 2025-01-08 01:06 52 ********************************* 126 2025-01-08 01:07 52 ********************************* 127 2025-01-08 01:08 52 ********************************* 0 2025-01-08 01:09 51 ******************************** 1 2025-01-08 01:10 49 ****************************** 2 2025-01-08 01:11 49 ****************************** 3 2025-01-08 01:12 50 ******************************* 4 2025-01-08 01:13 52 ********************************* 5 2025-01-08 01:14 52 ********************************* 6 2025-01-08 01:15 52 ********************************* 7 2025-01-08 01:16 51 ******************************** 8 2025-01-08 01:17 51 ******************************** 9 2025-01-08 01:18 50 ******************************* 10 2025-01-08 01:19 51 ******************************** 11 2025-01-08 01:20 51 ******************************** 12 2025-01-08 01:21 52 ********************************* 13 2025-01-08 01:22 53 ********************************** 14 2025-01-08 01:23 53 ********************************** 15 2025-01-08 01:24 51 ******************************** 16 2025-01-08 01:25 51 ******************************** 17 2025-01-08 01:26 51 ******************************** 18 2025-01-08 01:27 52 ********************************* 19 2025-01-08 01:28 51 ******************************** 20 2025-01-08 01:29 51 ******************************** 21 2025-01-08 01:30 51 ******************************** 22 2025-01-08 01:31 53 ********************************** ... ..( 2 skipped). .. ********************************** 25 2025-01-08 01:34 53 ********************************** 26 2025-01-08 01:35 50 ******************************* 27 2025-01-08 01:36 48 ***************************** 28 2025-01-08 01:37 48 ***************************** 29 2025-01-08 01:38 48 ***************************** 30 2025-01-08 01:39 50 ******************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x8000 4 15189 Vendor specific /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD1600AAJS-75M0A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.03E02 User Capacity: 160,000,000,000 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Jan 8 01:39:23 2025 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 39) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 141 132 021 - 3933 4 Start_Stop_Count -O--CK 100 100 000 - 266 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 96050 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 248 192 Power-Off_Retract_Count -O--CK 200 200 000 - 188 193 Load_Cycle_Count -O--CK 200 200 000 - 266 194 Temperature_Celsius -O---K 106 088 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 412 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 001 001 000 - 91279 241 Total_LBAs_Written -O--CK 200 200 000 - 46973637127 242 Total_LBAs_Read -O--CK 200 200 000 - 56156290073 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 13065 hours (544 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:13:20.053 SMART WRITE LOG 35 00 00 01 00 00 05 c2 00 6b 60 e0 00 00:13:20.052 WRITE DMA EXT 35 00 00 01 00 00 05 c1 00 6b 60 e0 00 00:13:20.051 WRITE DMA EXT 35 00 00 01 00 00 05 c0 00 6b 60 e0 00 00:13:20.050 WRITE DMA EXT 35 00 00 01 00 00 05 bf 00 6b 60 e0 00 00:13:20.044 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 13064 hours (544 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 00 4f 00 c2 e0 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:12:15.825 SMART WRITE LOG ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.825 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.825 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.823 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.823 FLUSH CACHE EXT Error 1 [0] occurred at disk power-on lifetime: 13064 hours (544 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 0f 4f 00 c2 e0 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:08:22.544 SMART WRITE LOG 25 00 00 00 80 00 09 74 00 77 60 e0 00 00:08:22.543 READ DMA EXT 25 00 00 01 00 00 09 73 00 77 60 e0 00 00:08:22.542 READ DMA EXT 25 00 00 01 00 00 09 72 00 77 60 e0 00 00:08:22.541 READ DMA EXT 25 00 00 01 00 00 09 71 00 77 60 e0 00 00:08:22.540 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30471 - # 2 Short offline Completed without error 00% 18875 - # 3 Short offline Completed without error 00% 718 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/37 Celsius Lifetime Min/Max Temperature: 36/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (423) Index Estimated Time Temperature Celsius 424 2025-01-07 17:42 37 ****************** ... ..(192 skipped). .. ****************** 139 2025-01-07 20:55 37 ****************** 140 2025-01-07 20:56 36 ***************** ... ..( 28 skipped). .. ***************** 169 2025-01-07 21:25 36 ***************** 170 2025-01-07 21:26 ? - 171 2025-01-07 21:27 36 ***************** ... ..( 32 skipped). .. ***************** 204 2025-01-07 22:00 36 ***************** 205 2025-01-07 22:01 ? - 206 2025-01-07 22:02 37 ****************** 207 2025-01-07 22:03 36 ***************** ... ..( 12 skipped). .. ***************** 220 2025-01-07 22:16 36 ***************** 221 2025-01-07 22:17 ? - 222 2025-01-07 22:18 37 ****************** 223 2025-01-07 22:19 36 ***************** ... ..( 8 skipped). .. ***************** 232 2025-01-07 22:28 36 ***************** 233 2025-01-07 22:29 37 ****************** 234 2025-01-07 22:30 36 ***************** 235 2025-01-07 22:31 37 ****************** 236 2025-01-07 22:32 37 ****************** 237 2025-01-07 22:33 36 ***************** ... ..( 24 skipped). .. ***************** 262 2025-01-07 22:58 36 ***************** 263 2025-01-07 22:59 37 ****************** ... ..( 23 skipped). .. ****************** 287 2025-01-07 23:23 37 ****************** 288 2025-01-07 23:24 36 ***************** ... ..( 20 skipped). .. ***************** 309 2025-01-07 23:45 36 ***************** 310 2025-01-07 23:46 37 ****************** ... ..( 21 skipped). .. ****************** 332 2025-01-08 00:08 37 ****************** 333 2025-01-08 00:09 36 ***************** 334 2025-01-08 00:10 37 ****************** ... ..( 31 skipped). .. ****************** 366 2025-01-08 00:42 37 ****************** 367 2025-01-08 00:43 36 ***************** 368 2025-01-08 00:44 37 ****************** ... ..( 16 skipped). .. ****************** 385 2025-01-08 01:01 37 ****************** 386 2025-01-08 01:02 36 ***************** 387 2025-01-08 01:03 36 ***************** 388 2025-01-08 01:04 37 ****************** ... ..( 34 skipped). .. ****************** 423 2025-01-08 01:39 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x8000 4 15188 Vendor specific