/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD3200BEKT-00A25T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Aug 26 05:39:07 2021 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 77) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 146 143 021 - 1700 4 Start_Stop_Count -O--CK 099 099 000 - 1001 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 060 060 000 - 29759 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 950 192 Power-Off_Retract_Count -O--CK 200 200 000 - 422 193 Load_Cycle_Count -O--CK 001 001 000 - 1802526 194 Temperature_Celsius -O---K 107 088 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 15472 - # 2 Conveyance offline Completed without error 00% 5869 - # 3 Short offline Completed without error 00% 1083 - # 4 Conveyance offline Completed without error 00% 945 - # 5 Short offline Completed without error 00% 5 - # 6 Conveyance offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 33/36 Celsius Lifetime Min/Max Temperature: 34/59 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (38) Index Estimated Time Temperature Celsius 39 2021-08-26 03:32 38 ******************* ... ..( 39 skipped). .. ******************* 79 2021-08-26 04:12 38 ******************* 80 2021-08-26 04:13 37 ****************** ... ..( 12 skipped). .. ****************** 93 2021-08-26 04:26 37 ****************** 94 2021-08-26 04:27 36 ***************** 95 2021-08-26 04:28 37 ****************** 96 2021-08-26 04:29 37 ****************** 97 2021-08-26 04:30 37 ****************** 98 2021-08-26 04:31 36 ***************** 99 2021-08-26 04:32 36 ***************** 100 2021-08-26 04:33 36 ***************** 101 2021-08-26 04:34 37 ****************** 102 2021-08-26 04:35 ? - 103 2021-08-26 04:36 28 ********* 104 2021-08-26 04:37 28 ********* 105 2021-08-26 04:38 29 ********** 106 2021-08-26 04:39 30 *********** 107 2021-08-26 04:40 31 ************ 108 2021-08-26 04:41 32 ************* 109 2021-08-26 04:42 31 ************ 110 2021-08-26 04:43 32 ************* 111 2021-08-26 04:44 ? - 112 2021-08-26 04:45 29 ********** 113 2021-08-26 04:46 30 *********** 114 2021-08-26 04:47 30 *********** 115 2021-08-26 04:48 31 ************ 116 2021-08-26 04:49 31 ************ 117 2021-08-26 04:50 32 ************* ... ..( 2 skipped). .. ************* 120 2021-08-26 04:53 32 ************* 121 2021-08-26 04:54 33 ************** 122 2021-08-26 04:55 33 ************** 123 2021-08-26 04:56 33 ************** 124 2021-08-26 04:57 34 *************** ... ..( 2 skipped). .. *************** 127 2021-08-26 05:00 34 *************** 0 2021-08-26 05:01 35 **************** 1 2021-08-26 05:02 35 **************** 2 2021-08-26 05:03 ? - 3 2021-08-26 05:04 31 ************ 4 2021-08-26 05:05 31 ************ 5 2021-08-26 05:06 31 ************ 6 2021-08-26 05:07 32 ************* 7 2021-08-26 05:08 32 ************* 8 2021-08-26 05:09 33 ************** 9 2021-08-26 05:10 34 *************** 10 2021-08-26 05:11 34 *************** 11 2021-08-26 05:12 34 *************** 12 2021-08-26 05:13 ? - 13 2021-08-26 05:14 33 ************** 14 2021-08-26 05:15 34 *************** 15 2021-08-26 05:16 34 *************** 16 2021-08-26 05:17 35 **************** 17 2021-08-26 05:18 34 *************** 18 2021-08-26 05:19 35 **************** ... ..( 6 skipped). .. **************** 25 2021-08-26 05:26 35 **************** 26 2021-08-26 05:27 36 ***************** ... ..( 11 skipped). .. ***************** 38 2021-08-26 05:39 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1559 Vendor specific