/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA800 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 13 08:00:43 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7119) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 097 016 - 0 2 Throughput_Performance POS--K 142 100 054 - 70 3 Spin_Up_Time PO---K 131 100 024 - 180 (Average 170) 4 Start_Stop_Count -O--CK 100 100 000 - 1613 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 115 100 020 - 34 9 Power_On_Hours -O--CK 097 097 000 - 24286 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1431 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 185 Unknown_Attribute -O--CK 100 100 000 - 65535 187 Reported_Uncorrect -O--CK 098 098 000 - 2 188 Command_Timeout -O--CK 100 099 000 - 1602157543425 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 071 060 000 - 29 (Min/Max 19/29) 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2169 193 Load_Cycle_Count -O--CK 099 099 000 - 2169 194 Temperature_Celsius -O---K 206 150 000 - 29 (Min/Max 13/40) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 18864 hours (786 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 41 02 90 00 00 2c 87 77 d0 0c 00 Error: IDNF at LBA = 0x2c8777d0 = 747075536 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 00 00 48 00 00 04 b4 46 00 40 00 1d+01:50:32.201 READ FPDMA QUEUED 60 02 00 00 40 00 00 04 b4 44 00 40 00 1d+01:50:32.191 READ FPDMA QUEUED 60 02 00 00 38 00 00 04 b4 42 00 40 00 1d+01:50:32.181 READ FPDMA QUEUED 60 02 00 00 30 00 00 04 b4 40 00 40 00 1d+01:50:32.172 READ FPDMA QUEUED 60 02 00 00 28 00 00 04 b4 3e 00 40 00 1d+01:50:32.162 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 18863 hours (785 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 41 02 c0 00 00 27 36 aa c0 07 00 Error: IDNF at LBA = 0x2736aac0 = 657894080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 00 00 98 00 00 68 b9 46 00 40 00 1d+01:21:01.068 READ FPDMA QUEUED 60 02 00 00 f8 00 00 68 b9 44 00 40 00 1d+01:21:01.057 READ FPDMA QUEUED 60 02 00 00 18 00 00 68 b9 42 00 40 00 1d+01:21:01.044 READ FPDMA QUEUED 60 02 00 00 f0 00 00 68 b9 40 00 40 00 1d+01:21:01.034 READ FPDMA QUEUED 60 02 00 00 e8 00 00 68 b9 3e 00 40 00 1d+01:21:01.023 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14667 - # 2 Short offline Completed without error 00% 14647 - # 3 Short offline Completed without error 00% 13327 - # 4 Short offline Completed without error 00% 13303 - # 5 Short offline Completed without error 00% 13279 - # 6 Short offline Completed without error 00% 13075 - # 7 Short offline Completed without error 00% 13051 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 19/29 Celsius Lifetime Min/Max Temperature: 13/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2021-12-13 05:53 27 ******** ... ..( 5 skipped). .. ******** 99 2021-12-13 05:59 27 ******** 100 2021-12-13 06:00 28 ********* ... ..( 13 skipped). .. ********* 114 2021-12-13 06:14 28 ********* 115 2021-12-13 06:15 ? - 116 2021-12-13 06:16 20 * 117 2021-12-13 06:17 21 ** 118 2021-12-13 06:18 22 *** 119 2021-12-13 06:19 22 *** 120 2021-12-13 06:20 23 **** 121 2021-12-13 06:21 24 ***** 122 2021-12-13 06:22 24 ***** 123 2021-12-13 06:23 25 ****** 124 2021-12-13 06:24 25 ****** 125 2021-12-13 06:25 25 ****** 126 2021-12-13 06:26 26 ******* 127 2021-12-13 06:27 26 ******* 0 2021-12-13 06:28 26 ******* 1 2021-12-13 06:29 27 ******** 2 2021-12-13 06:30 27 ******** 3 2021-12-13 06:31 27 ******** 4 2021-12-13 06:32 28 ********* ... ..( 3 skipped). .. ********* 8 2021-12-13 06:36 28 ********* 9 2021-12-13 06:37 29 ********** ... ..( 13 skipped). .. ********** 23 2021-12-13 06:51 29 ********** 24 2021-12-13 06:52 28 ********* 25 2021-12-13 06:53 29 ********** 26 2021-12-13 06:54 29 ********** 27 2021-12-13 06:55 28 ********* 28 2021-12-13 06:56 28 ********* 29 2021-12-13 06:57 29 ********** 30 2021-12-13 06:58 28 ********* 31 2021-12-13 06:59 28 ********* 32 2021-12-13 07:00 29 ********** 33 2021-12-13 07:01 28 ********* 34 2021-12-13 07:02 29 ********** ... ..( 18 skipped). .. ********** 53 2021-12-13 07:21 29 ********** 54 2021-12-13 07:22 28 ********* ... ..( 8 skipped). .. ********* 63 2021-12-13 07:31 28 ********* 64 2021-12-13 07:32 29 ********** ... ..( 6 skipped). .. ********** 71 2021-12-13 07:39 29 ********** 72 2021-12-13 07:40 28 ********* 73 2021-12-13 07:41 29 ********** 74 2021-12-13 07:42 28 ********* ... ..( 4 skipped). .. ********* 79 2021-12-13 07:47 28 ********* 80 2021-12-13 07:48 29 ********** 81 2021-12-13 07:49 28 ********* 82 2021-12-13 07:50 28 ********* 83 2021-12-13 07:51 28 ********* 84 2021-12-13 07:52 29 ********** ... ..( 7 skipped). .. ********** 92 2021-12-13 08:00 29 ********** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1431 --- Lifetime Power-On Resets 0x01 0x010 4 24286 --- Power-on Hours 0x01 0x018 6 611233014484 --- Logical Sectors Written 0x01 0x020 6 1429329654 --- Number of Write Commands 0x01 0x028 6 1427370201327 --- Logical Sectors Read 0x01 0x030 6 2460587287 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 24171 --- Spindle Motor Power-on Hours 0x03 0x010 4 24171 --- Head Flying Hours 0x03 0x018 4 2169 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 63 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x010 1 27 N-- Average Short Term Temperature 0x05 0x018 1 27 N-- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 36 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 33 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16616 --- Number of Hardware Resets 0x06 0x010 4 14680 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/nvme0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SK hynix BC501 HFM128GDJTNG-8310A Serial Number: -- Firmware Version: 80003C00 PCI Vendor/Subsystem ID: 0x1c5c IEEE OUI Identifier: 0xace42e Controller ID: 1 NVMe Version: 1.2.1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: ace42e ... Local Time is: Mon Dec 13 08:00:45 2021 EST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 82 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.5000W - - 0 0 0 0 5 5 1 + 2.4000W - - 1 1 1 1 30 30 2 + 1.9000W - - 2 2 2 2 100 100 3 - 0.0350W - - 3 3 3 3 1000 1000 4 - 0.0050W - - 3 3 3 3 1000 5000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 26% Data Units Read: 73,513,441 [37.6 TB] Data Units Written: 98,713,326 [50.5 TB] Host Read Commands: 811,232,138 Host Write Commands: 1,084,826,640 Controller Busy Time: 9,592 Power Cycles: 1,710 Power On Hours: 8,717 Unsafe Shutdowns: 521 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 37 Celsius Temperature Sensor 2: 38 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged