/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7LM240HMHQ-00005 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: GXT5204Q User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 16 19:19:53 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1740) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 29) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 17595 12 Power_Cycle_Count -O--CK 099 099 000 - 84 177 Wear_Leveling_Count PO--C- 098 098 005 - 93 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 821 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 061 058 000 - 39 194 Temperature_Celsius -O---K 061 058 000 - 39 (Min/Max 21/45) 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 17 202 Exception_Mode_Status PO--CK 100 100 010 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 57 241 Total_LBAs_Written -O--CK 099 099 000 - 11824243607 242 Total_LBAs_Read -O--CK 099 099 000 - 6338788637 243 SATA_Downshift_Ct -O--CK 100 100 000 - 0 244 Thermal_Throttle_St -O--CK 100 100 000 - 0 245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535 246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535 247 Timed_Workld_Timer -O--CK 100 100 000 - 65535 251 NAND_Writes -O--CK 100 100 000 - 50193165120 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16587 - # 2 Short offline Completed without error 00% 16579 - # 3 Extended offline Completed without error 00% 16292 - # 4 Short offline Completed without error 00% 16264 - # 5 Short offline Completed without error 00% 16240 - # 6 Short offline Completed without error 00% 16216 - # 7 Short offline Completed without error 00% 16192 - # 8 Short offline Completed without error 00% 16168 - # 9 Short offline Completed without error 00% 16144 - #10 Short offline Completed without error 00% 16120 - #11 Short offline Completed without error 00% 16096 - #12 Short offline Completed without error 00% 16072 - #13 Short offline Completed without error 00% 16048 - #14 Short offline Completed without error 00% 16024 - #15 Short offline Completed without error 00% 16000 - #16 Short offline Completed without error 00% 15976 - #17 Short offline Completed without error 00% 15952 - #18 Short offline Completed without error 00% 15928 - #19 Short offline Completed without error 00% 15925 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 37/41 Celsius Lifetime Min/Max Temperature: 21/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (48) Index Estimated Time Temperature Celsius 49 2022-08-15 22:00 38 ******************* 50 2022-08-15 22:10 39 ******************** ... ..( 12 skipped). .. ******************** 63 2022-08-16 00:20 39 ******************** 64 2022-08-16 00:30 38 ******************* 65 2022-08-16 00:40 39 ******************** ... ..( 4 skipped). .. ******************** 70 2022-08-16 01:30 39 ******************** 71 2022-08-16 01:40 38 ******************* 72 2022-08-16 01:50 39 ******************** ... ..( 22 skipped). .. ******************** 95 2022-08-16 05:40 39 ******************** 96 2022-08-16 05:50 38 ******************* 97 2022-08-16 06:00 39 ******************** ... ..( 15 skipped). .. ******************** 113 2022-08-16 08:40 39 ******************** 114 2022-08-16 08:50 38 ******************* 115 2022-08-16 09:00 39 ******************** ... ..( 4 skipped). .. ******************** 120 2022-08-16 09:50 39 ******************** 121 2022-08-16 10:00 38 ******************* 122 2022-08-16 10:10 39 ******************** ... ..( 3 skipped). .. ******************** 126 2022-08-16 10:50 39 ******************** 127 2022-08-16 11:00 38 ******************* 0 2022-08-16 11:10 39 ******************** ... ..( 25 skipped). .. ******************** 26 2022-08-16 15:30 39 ******************** 27 2022-08-16 15:40 38 ******************* 28 2022-08-16 15:50 39 ******************** ... ..( 9 skipped). .. ******************** 38 2022-08-16 17:30 39 ******************** 39 2022-08-16 17:40 40 ********************* 40 2022-08-16 17:50 39 ******************** ... ..( 3 skipped). .. ******************** 44 2022-08-16 18:30 39 ******************** 45 2022-08-16 18:40 40 ********************* 46 2022-08-16 18:50 39 ******************** 47 2022-08-16 19:00 39 ******************** 48 2022-08-16 19:10 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 84 --- Lifetime Power-On Resets 0x01 0x010 4 17595 --- Power-on Hours 0x01 0x018 6 11824243607 --- Logical Sectors Written 0x01 0x020 6 247555485 --- Number of Write Commands 0x01 0x028 6 6338788637 --- Logical Sectors Read 0x01 0x030 6 72752120 --- Number of Read Commands 0x01 0x038 6 1897000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 39 --- Current Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 335 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 17 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 30 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 30 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC