Probe #512a05eefb of Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO mSATA 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT41B6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Nov 27 00:41:23 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 8502 12 Power_Cycle_Count -O--CK 099 099 000 - 158 177 Wear_Leveling_Count PO--C- 099 099 000 - 15 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 031 028 000 - 69 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 98 241 Total_LBAs_Written -O--CK 099 099 000 - 3372760253 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 69 Celsius Power Cycle Min/Max Temperature: 62/70 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (126) Index Estimated Time Temperature Celsius 127 2022-11-26 03:30 ? - 0 2022-11-26 03:40 67 ***************************************+ 1 2022-11-26 03:50 66 ***************************************+ 2 2022-11-26 04:00 63 ***************************************+ 3 2022-11-26 04:10 68 ***************************************+ 4 2022-11-26 04:20 69 ***************************************+ 5 2022-11-26 04:30 62 ***************************************+ 6 2022-11-26 04:40 63 ***************************************+ 7 2022-11-26 04:50 68 ***************************************+ 8 2022-11-26 05:00 64 ***************************************+ 9 2022-11-26 05:10 68 ***************************************+ 10 2022-11-26 05:20 66 ***************************************+ 11 2022-11-26 05:30 69 ***************************************+ ... ..( 6 skipped). .. ***************************************+ 18 2022-11-26 06:40 69 ***************************************+ 19 2022-11-26 06:50 70 ***************************************+ ... ..( 2 skipped). .. ***************************************+ 22 2022-11-26 07:20 70 ***************************************+ 23 2022-11-26 07:30 66 ***************************************+ 24 2022-11-26 07:40 69 ***************************************+ 25 2022-11-26 07:50 69 ***************************************+ 26 2022-11-26 08:00 70 ***************************************+ ... ..( 9 skipped). .. ***************************************+ 36 2022-11-26 09:40 70 ***************************************+ 37 2022-11-26 09:50 69 ***************************************+ ... ..( 2 skipped). .. ***************************************+ 40 2022-11-26 10:20 69 ***************************************+ 41 2022-11-26 10:30 70 ***************************************+ ... ..( 6 skipped). .. ***************************************+ 48 2022-11-26 11:40 70 ***************************************+ 49 2022-11-26 11:50 69 ***************************************+ 50 2022-11-26 12:00 69 ***************************************+ 51 2022-11-26 12:10 69 ***************************************+ 52 2022-11-26 12:20 70 ***************************************+ ... ..( 4 skipped). .. ***************************************+ 57 2022-11-26 13:10 70 ***************************************+ 58 2022-11-26 13:20 69 ***************************************+ ... ..( 2 skipped). .. ***************************************+ 61 2022-11-26 13:50 69 ***************************************+ 62 2022-11-26 14:00 70 ***************************************+ ... ..( 7 skipped). .. ***************************************+ 70 2022-11-26 15:20 70 ***************************************+ 71 2022-11-26 15:30 69 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 75 2022-11-26 16:10 69 ***************************************+ 76 2022-11-26 16:20 70 ***************************************+ ... ..( 6 skipped). .. ***************************************+ 83 2022-11-26 17:30 70 ***************************************+ 84 2022-11-26 17:40 69 ***************************************+ ... ..( 3 skipped). .. ***************************************+ 88 2022-11-26 18:20 69 ***************************************+ 89 2022-11-26 18:30 68 ***************************************+ ... ..( 21 skipped). .. ***************************************+ 111 2022-11-26 22:10 68 ***************************************+ 112 2022-11-26 22:20 69 ***************************************+ ... ..( 4 skipped). .. ***************************************+ 117 2022-11-26 23:10 69 ***************************************+ 118 2022-11-26 23:20 68 ***************************************+ ... ..( 4 skipped). .. ***************************************+ 123 2022-11-27 00:10 68 ***************************************+ 124 2022-11-27 00:20 69 ***************************************+ 125 2022-11-27 00:30 69 ***************************************+ 126 2022-11-27 00:40 69 ***************************************+ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub