/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSD 240GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HPS2227D User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Feb 25 10:18:47 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 1048 12 Power_Cycle_Count -O--CK 100 100 050 - 1337 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 923 164 Unknown_Attribute -O--CK 100 100 050 - 184 165 Unknown_Attribute -O--CK 100 100 050 - 270 166 Unknown_Attribute -O--CK 100 100 050 - 165 167 Unknown_Attribute -O--CK 100 100 050 - 186 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33685585 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 12439 177 Wear_Leveling_Count -O--CK 100 100 050 - 72068179 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 61 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 422 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 389840 242 Total_LBAs_Read -O--CK 100 100 050 - 190568 245 Unknown_Attribute -O--CK 100 100 050 - 719769 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 789 hours (32 days + 21 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- a0 00 00 00 00 00 00 00 00 51 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:07.570 IDENTIFY DEVICE e0 00 00 00 00 00 00 00 00 00 00 00 00 00:00:07.230 STANDBY IMMEDIATE e7 00 00 00 00 00 00 00 00 00 00 00 00 00:00:07.230 FLUSH CACHE 50 00 01 00 01 00 00 00 00 00 01 00 ff 00:00:07.210 FORMAT TRACK [OBS-4] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 569 - # 2 Offline Self-test routine in progress 10% 569 - # 3 Offline Self-test routine in progress 10% 569 - # 4 Offline Self-test routine in progress 10% 569 - # 5 Offline Self-test routine in progress 10% 569 - # 6 Offline Self-test routine in progress 10% 569 - # 7 Offline Self-test routine in progress 10% 569 - # 8 Offline Self-test routine in progress 10% 569 - # 9 Offline Self-test routine in progress 10% 569 - #10 Offline Self-test routine in progress 10% 569 - #11 Offline Self-test routine in progress 10% 569 - #12 Offline Self-test routine in progress 10% 569 - #13 Offline Self-test routine in progress 10% 569 - #14 Offline Self-test routine in progress 10% 569 - #15 Offline Self-test routine in progress 10% 569 - #16 Offline Self-test routine in progress 10% 569 - #17 Offline Self-test routine in progress 10% 569 - #18 Offline Self-test routine in progress 10% 569 - #19 Offline Self-test routine in progress 10% 569 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1337 --- Lifetime Power-On Resets 0x01 0x010 4 1048 --- Power-on Hours 0x01 0x018 6 25548554240 --- Logical Sectors Written 0x01 0x020 6 131282027 --- Number of Write Commands 0x01 0x028 6 12489064448 --- Logical Sectors Read 0x01 0x030 6 131772299 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 4687 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 12361 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD10SPZX-35Z10T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 04.01A04 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Feb 25 10:18:47 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 480) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 49) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 194 193 021 - 1266 4 Start_Stop_Count -O--CK 099 099 000 - 1876 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3112 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1740 191 G-Sense_Error_Rate -O--CK 001 001 000 - 5414 192 Power-Off_Retract_Count -O--CK 200 200 000 - 130 193 Load_Cycle_Count -O--CK 194 194 000 - 20504 194 Temperature_Celsius -O---K 112 096 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2225 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 31/35 Celsius Lifetime Min/Max Temperature: 12/47 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (87) Index Estimated Time Temperature Celsius 88 2023-02-25 08:11 35 **************** ... ..( 10 skipped). .. **************** 99 2023-02-25 08:22 35 **************** 100 2023-02-25 08:23 34 *************** ... ..( 46 skipped). .. *************** 19 2023-02-25 09:10 34 *************** 20 2023-02-25 09:11 35 **************** ... ..( 18 skipped). .. **************** 39 2023-02-25 09:30 35 **************** 40 2023-02-25 09:31 34 *************** 41 2023-02-25 09:32 ? - 42 2023-02-25 09:33 34 *************** ... ..( 4 skipped). .. *************** 47 2023-02-25 09:38 34 *************** 48 2023-02-25 09:39 ? - 49 2023-02-25 09:40 35 **************** 50 2023-02-25 09:41 35 **************** 51 2023-02-25 09:42 34 *************** ... ..( 2 skipped). .. *************** 54 2023-02-25 09:45 34 *************** 55 2023-02-25 09:46 33 ************** ... ..( 5 skipped). .. ************** 61 2023-02-25 09:52 33 ************** 62 2023-02-25 09:53 32 ************* 63 2023-02-25 09:54 33 ************** 64 2023-02-25 09:55 32 ************* ... ..( 10 skipped). .. ************* 75 2023-02-25 10:06 32 ************* 76 2023-02-25 10:07 31 ************ ... ..( 10 skipped). .. ************ 87 2023-02-25 10:18 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2447 Vendor specific