/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.3-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD800JD-75MSA3 Serial Number: -- Firmware Version: 10.01E04 User Capacity: 80,000,000,000 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Apr 9 10:52:02 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 33) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 179 160 021 - 2016 4 Start_Stop_Count -O--CK 099 099 000 - 1783 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 088 088 000 - 8871 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1778 190 Airflow_Temperature_Cel -O---K 078 040 045 Past 22 194 Temperature_Celsius -O---K 121 083 000 - 22 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8812 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: --/22 Celsius Lifetime Min/Max Temperature: --/64 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/70 Celsius Temperature History Size (Index): 128 (40) Index Estimated Time Temperature Celsius 41 2022-04-09 08:45 28 ********* 42 2022-04-09 08:46 29 ********** 43 2022-04-09 08:47 29 ********** 44 2022-04-09 08:48 29 ********** 45 2022-04-09 08:49 30 *********** 46 2022-04-09 08:50 31 ************ ... ..( 2 skipped). .. ************ 49 2022-04-09 08:53 31 ************ 50 2022-04-09 08:54 32 ************* 51 2022-04-09 08:55 33 ************** 52 2022-04-09 08:56 37 ****************** 53 2022-04-09 08:57 38 ******************* 54 2022-04-09 08:58 38 ******************* 55 2022-04-09 08:59 35 **************** 56 2022-04-09 09:00 35 **************** 57 2022-04-09 09:01 ? - 58 2022-04-09 09:02 ? - 59 2022-04-09 09:03 29 ********** 60 2022-04-09 09:04 31 ************ ... ..( 2 skipped). .. ************ 63 2022-04-09 09:07 31 ************ 64 2022-04-09 09:08 32 ************* 65 2022-04-09 09:09 33 ************** ... ..( 6 skipped). .. ************** 72 2022-04-09 09:16 33 ************** 73 2022-04-09 09:17 ? - 74 2022-04-09 09:18 32 ************* 75 2022-04-09 09:19 33 ************** 76 2022-04-09 09:20 35 **************** ... ..( 10 skipped). .. **************** 87 2022-04-09 09:31 35 **************** 88 2022-04-09 09:32 36 ***************** 89 2022-04-09 09:33 36 ***************** 90 2022-04-09 09:34 37 ****************** ... ..( 29 skipped). .. ****************** 120 2022-04-09 10:04 37 ****************** 121 2022-04-09 10:05 40 ********************* 122 2022-04-09 10:06 40 ********************* 123 2022-04-09 10:07 40 ********************* 124 2022-04-09 10:08 37 ****************** ... ..( 7 skipped). .. ****************** 4 2022-04-09 10:16 37 ****************** 5 2022-04-09 10:17 ? - 6 2022-04-09 10:18 32 ************* 7 2022-04-09 10:19 33 ************** 8 2022-04-09 10:20 35 **************** ... ..( 4 skipped). .. **************** 13 2022-04-09 10:25 35 **************** 14 2022-04-09 10:26 ? - 15 2022-04-09 10:27 ? - 16 2022-04-09 10:28 21 ** 17 2022-04-09 10:29 22 *** 18 2022-04-09 10:30 25 ****** 19 2022-04-09 10:31 26 ******* 20 2022-04-09 10:32 27 ******** 21 2022-04-09 10:33 27 ******** 22 2022-04-09 10:34 28 ********* 23 2022-04-09 10:35 ? - 24 2022-04-09 10:36 21 ** 25 2022-04-09 10:37 23 **** 26 2022-04-09 10:38 26 ******* 27 2022-04-09 10:39 27 ******** 28 2022-04-09 10:40 27 ******** 29 2022-04-09 10:41 28 ********* 30 2022-04-09 10:42 29 ********** 31 2022-04-09 10:43 29 ********** 32 2022-04-09 10:44 29 ********** 33 2022-04-09 10:45 ? - 34 2022-04-09 10:46 23 **** 35 2022-04-09 10:47 26 ******* 36 2022-04-09 10:48 28 ********* 37 2022-04-09 10:49 29 ********** 38 2022-04-09 10:50 29 ********** 39 2022-04-09 10:51 30 *********** 40 2022-04-09 10:52 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x8000 4 54 Vendor specific