/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-00ERMA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 15.01H15 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri May 21 19:52:54 2021 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 88) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 140 140 021 - 3958 4 Start_Stop_Count -O--CK 099 099 000 - 1005 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1224 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1005 192 Power-Off_Retract_Count -O--CK 200 200 000 - 214 193 Load_Cycle_Count -O--CK 200 200 000 - 790 194 Temperature_Celsius -O---K 104 092 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 30/39 Celsius Lifetime Min/Max Temperature: 0/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (33) Index Estimated Time Temperature Celsius 34 2021-05-21 11:55 41 ********************** ... ..( 17 skipped). .. ********************** 52 2021-05-21 12:13 41 ********************** 53 2021-05-21 12:14 ? - 54 2021-05-21 12:15 30 *********** 55 2021-05-21 12:16 ? - 56 2021-05-21 12:17 30 *********** 57 2021-05-21 12:18 30 *********** 58 2021-05-21 12:19 31 ************ 59 2021-05-21 12:20 32 ************* 60 2021-05-21 12:21 32 ************* 61 2021-05-21 12:22 33 ************** 62 2021-05-21 12:23 33 ************** 63 2021-05-21 12:24 34 *************** 64 2021-05-21 12:25 35 **************** ... ..( 3 skipped). .. **************** 68 2021-05-21 12:29 35 **************** 69 2021-05-21 12:30 36 ***************** 70 2021-05-21 12:31 36 ***************** 71 2021-05-21 12:32 36 ***************** 72 2021-05-21 12:33 37 ****************** ... ..( 2 skipped). .. ****************** 75 2021-05-21 12:36 37 ****************** 76 2021-05-21 12:37 38 ******************* ... ..( 2 skipped). .. ******************* 79 2021-05-21 12:40 38 ******************* 80 2021-05-21 12:41 39 ******************** ... ..( 2 skipped). .. ******************** 83 2021-05-21 12:44 39 ******************** 84 2021-05-21 12:45 30 *********** 85 2021-05-21 12:46 ? - 86 2021-05-21 12:47 30 *********** 87 2021-05-21 12:48 31 ************ 88 2021-05-21 12:49 32 ************* 89 2021-05-21 12:50 32 ************* 90 2021-05-21 12:51 32 ************* 91 2021-05-21 12:52 33 ************** 92 2021-05-21 12:53 34 *************** 93 2021-05-21 12:54 34 *************** 94 2021-05-21 12:55 35 **************** ... ..( 2 skipped). .. **************** 97 2021-05-21 12:58 35 **************** 98 2021-05-21 12:59 36 ***************** 99 2021-05-21 13:00 36 ***************** 100 2021-05-21 13:01 36 ***************** 101 2021-05-21 13:02 37 ****************** ... ..( 2 skipped). .. ****************** 104 2021-05-21 13:05 37 ****************** 105 2021-05-21 13:06 38 ******************* 106 2021-05-21 13:07 38 ******************* 107 2021-05-21 13:08 39 ******************** ... ..( 6 skipped). .. ******************** 114 2021-05-21 13:15 39 ******************** 115 2021-05-21 13:16 40 ********************* ... ..(322 skipped). .. ********************* 438 2021-05-21 18:39 40 ********************* 439 2021-05-21 18:40 ? - 440 2021-05-21 18:41 41 ********************** ... ..( 70 skipped). .. ********************** 33 2021-05-21 19:52 41 ********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1715 Vendor specific