/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST750LM022 HN-M750MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR20002 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Feb 11 14:15:06 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 9420) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 157) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 46 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 090 089 025 - 3059 4 Start_Stop_Count -O--CK 097 097 000 - 3838 5 Reallocated_Sector_Ct PO--CK 094 094 010 - 816 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 13002 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2961 191 G-Sense_Error_Rate -O---K 100 100 000 - 135 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 063 000 - 30 (Min/Max 18/38) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 094 094 000 - 816 197 Current_Pending_Sector -O--CK 093 093 000 - 885 198 Offline_Uncorrectable ----CK 093 093 000 - 875 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 2775 223 Load_Retry_Count -O--CK 100 100 000 - 40 225 Load_Cycle_Count -O--CK 090 090 000 - 104691 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 30 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 30 [5] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 33 99 ab 18 e0 00 Error: UNC 8 sectors at LBA = 0x3399ab18 = 865708824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 33 99 ab 18 e0 00 00:00:00.401 READ DMA EXT 35 00 00 00 08 00 00 52 d8 09 d0 e0 00 00:00:00.401 WRITE DMA EXT 35 00 00 00 20 00 00 52 95 38 c8 e0 00 00:00:00.401 WRITE DMA EXT 35 00 00 00 08 00 00 52 94 ca a0 e0 00 00:00:00.401 WRITE DMA EXT c8 00 00 00 20 00 00 00 8e d0 90 e7 00 00:00:00.401 READ DMA Error 29 [4] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 33 99 ab 18 e0 00 Error: UNC 256 sectors at LBA = 0x3399ab18 = 865708824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 08 00 00 33 99 ab 10 e0 00 00:00:00.399 READ DMA EXT c8 00 00 00 08 00 00 00 28 8e 88 e0 00 00:00:00.399 READ DMA 35 00 00 00 08 00 00 52 94 da e8 e0 00 00:00:00.399 WRITE DMA EXT 25 00 00 00 88 00 00 33 98 f3 80 e0 00 00:00:00.399 READ DMA EXT c8 00 00 00 08 00 00 00 28 8e 10 e0 00 00:00:00.399 READ DMA Error 28 [3] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 33 99 a3 b8 e0 00 Error: UNC 8 sectors at LBA = 0x3399a3b8 = 865706936 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 33 99 a3 b8 e0 00 00:00:00.395 READ DMA EXT c8 00 00 00 00 00 00 00 8e 2f 28 e7 00 00:00:00.395 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:00:00.395 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:00.395 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.395 IDENTIFY DEVICE Error 27 [2] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 33 99 a3 b8 e0 00 Error: UNC 8 sectors at LBA = 0x3399a3b8 = 865706936 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 33 99 a3 b8 e0 00 00:00:00.393 READ DMA EXT 25 00 00 00 08 00 00 33 99 a3 98 e0 00 00:00:00.393 READ DMA EXT 25 00 00 00 08 00 00 33 99 a2 f8 e0 00 00:00:00.393 READ DMA EXT c8 00 00 00 08 00 00 00 28 8b d0 e0 00 00:00:00.393 READ DMA 25 00 00 00 08 00 00 33 99 a3 88 e0 00 00:00:00.393 READ DMA EXT Error 26 [1] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 33 a8 54 a8 e0 00 Error: UNC 8 sectors at LBA = 0x33a854a8 = 866669736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 33 a8 54 a8 e0 00 00:00:00.302 READ DMA EXT c8 00 00 00 08 00 00 00 28 ed e0 e0 00 00:00:00.302 READ DMA 25 00 00 00 08 00 00 3d 58 09 60 e0 00 00:00:00.302 READ DMA EXT ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:00:00.302 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:00:00.302 SET FEATURES [Enable SATA feature] Error 25 [0] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 33 a8 54 a8 40 00 Error: UNC at LBA = 0x33a854a8 = 866669736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 28 ed e0 40 08 00:00:00.272 READ FPDMA QUEUED 60 00 00 00 08 00 00 33 a8 54 a8 40 08 00:00:00.264 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 11 31 80 40 08 00:00:00.270 WRITE FPDMA QUEUED 61 00 03 00 08 00 00 00 11 31 20 40 08 00:00:00.270 WRITE FPDMA QUEUED 61 00 10 00 08 00 00 00 11 31 10 40 08 00:00:00.270 WRITE FPDMA QUEUED Error 24 [7] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 33 a8 54 a8 40 00 Error: UNC at LBA = 0x33a854a8 = 866669736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 33 a8 54 a8 40 08 00:00:00.227 READ FPDMA QUEUED 60 00 00 00 08 00 00 3d 58 09 60 40 08 00:00:00.267 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 11 2d 08 40 08 00:00:00.267 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 00 11 2c e0 40 08 00:00:00.267 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 11 2c d0 40 08 00:00:00.267 WRITE FPDMA QUEUED Error 23 [6] occurred at disk power-on lifetime: 12828 hours (534 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 33 a8 54 a8 40 00 Error: UNC at LBA = 0x33a854a8 = 866669736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 33 a8 54 a8 40 08 00:00:00.227 READ FPDMA QUEUED 60 00 00 00 08 00 00 33 a8 54 a8 40 08 00:00:00.264 READ FPDMA QUEUED 61 00 00 00 08 00 00 2b 94 33 20 40 08 00:00:00.264 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 11 5c 58 40 08 00:00:00.264 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 11 5c 48 40 08 00:00:00.264 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 12549 927627272 # 2 Short offline Completed: read failure 90% 12544 927627272 # 3 Short offline Completed: read failure 90% 12538 927627272 # 4 Short offline Completed: read failure 90% 12529 927627272 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 28/30 Celsius Lifetime Min/Max Temperature: 18/38 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (71) Index Estimated Time Temperature Celsius 72 2021-02-11 03:40 30 *********** ... ..( 4 skipped). .. *********** 77 2021-02-11 04:05 30 *********** 78 2021-02-11 04:10 31 ************ ... ..( 17 skipped). .. ************ 96 2021-02-11 05:40 31 ************ 97 2021-02-11 05:45 30 *********** ... ..( 20 skipped). .. *********** 118 2021-02-11 07:30 30 *********** 119 2021-02-11 07:35 29 ********** ... ..( 10 skipped). .. ********** 2 2021-02-11 08:30 29 ********** 3 2021-02-11 08:35 28 ********* ... ..( 5 skipped). .. ********* 9 2021-02-11 09:05 28 ********* 10 2021-02-11 09:10 30 *********** 11 2021-02-11 09:15 30 *********** 12 2021-02-11 09:20 30 *********** 13 2021-02-11 09:25 29 ********** 14 2021-02-11 09:30 27 ******** 15 2021-02-11 09:35 28 ********* 16 2021-02-11 09:40 28 ********* 17 2021-02-11 09:45 29 ********** 18 2021-02-11 09:50 29 ********** 19 2021-02-11 09:55 27 ******** 20 2021-02-11 10:00 28 ********* 21 2021-02-11 10:05 28 ********* 22 2021-02-11 10:10 28 ********* 23 2021-02-11 10:15 30 *********** 24 2021-02-11 10:20 26 ******* ... ..( 3 skipped). .. ******* 28 2021-02-11 10:40 26 ******* 29 2021-02-11 10:45 25 ****** 30 2021-02-11 10:50 25 ****** 31 2021-02-11 10:55 26 ******* 32 2021-02-11 11:00 27 ******** ... ..( 6 skipped). .. ******** 39 2021-02-11 11:35 27 ******** 40 2021-02-11 11:40 24 ***** 41 2021-02-11 11:45 24 ***** 42 2021-02-11 11:50 25 ****** 43 2021-02-11 11:55 25 ****** 44 2021-02-11 12:00 26 ******* 45 2021-02-11 12:05 24 ***** 46 2021-02-11 12:10 25 ****** 47 2021-02-11 12:15 25 ****** 48 2021-02-11 12:20 26 ******* 49 2021-02-11 12:25 26 ******* 50 2021-02-11 12:30 24 ***** 51 2021-02-11 12:35 25 ****** 52 2021-02-11 12:40 26 ******* 53 2021-02-11 12:45 27 ******** 54 2021-02-11 12:50 27 ******** 55 2021-02-11 12:55 26 ******* ... ..( 3 skipped). .. ******* 59 2021-02-11 13:15 26 ******* 60 2021-02-11 13:20 28 ********* 61 2021-02-11 13:25 29 ********** 62 2021-02-11 13:30 30 *********** 63 2021-02-11 13:35 29 ********** ... ..( 3 skipped). .. ********** 67 2021-02-11 13:55 29 ********** 68 2021-02-11 14:00 30 *********** 69 2021-02-11 14:05 29 ********** 70 2021-02-11 14:10 30 *********** 71 2021-02-11 14:15 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 10 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific