/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7 Device Model: SAMSUNG HM250HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AC101C4 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Nov 29 14:37:31 2023 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4020) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 67) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2010 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 093 093 025 - 2340 4 Start_Stop_Count -O--CK 099 099 000 - 1827 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8761 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 099 099 000 - 1658 12 Power_Cycle_Count -O--CK 099 099 000 - 1782 191 G-Sense_Error_Rate -O---K 100 100 000 - 1629 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 052 000 - 29 (Min/Max 8/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 81 223 Load_Retry_Count -O--CK 099 099 000 - 1658 225 Load_Cycle_Count -O--CK 086 086 000 - 149250 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1963 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1963 [2] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 10 cf 9d b0 40 08 00:00:31.033 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:31.033 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:31.033 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:31.033 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:31.033 SET FEATURES [Set transfer mode] Error 1962 [1] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 10 cf 9d b0 40 08 00:00:31.032 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:31.032 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:31.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:31.032 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:31.032 SET FEATURES [Set transfer mode] Error 1961 [0] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 10 cf 9d b0 40 08 00:00:31.030 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:31.017 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:31.017 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:31.017 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:31.017 SET FEATURES [Set transfer mode] Error 1960 [7] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 da 00 08 00 00 10 cf 9d b0 40 08 00:00:31.016 READ FPDMA QUEUED 60 00 da 00 08 00 00 10 d1 eb e8 40 08 00:00:31.016 READ FPDMA QUEUED 60 00 00 00 08 00 00 10 d1 eb e0 40 08 00:00:31.016 READ FPDMA QUEUED 60 00 d0 00 08 00 00 10 d1 eb d8 40 08 00:00:31.016 READ FPDMA QUEUED 60 00 d1 00 08 00 00 10 d1 eb d0 40 08 00:00:31.016 READ FPDMA QUEUED Error 1959 [6] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 08 00 00 10 cf 9d b0 40 08 00:00:31.013 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:31.013 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:31.013 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:31.013 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:31.013 SET FEATURES [Set transfer mode] Error 1958 [5] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 da 00 08 00 00 10 cf 9d b0 40 08 00:00:31.011 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:30.991 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:30.991 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:30.991 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:30.991 SET FEATURES [Set transfer mode] Error 1957 [4] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d0 00 08 00 00 10 cf 9d b0 40 08 00:00:30.990 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:30.990 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:30.990 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:30.990 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:30.990 SET FEATURES [Set transfer mode] Error 1956 [3] occurred at disk power-on lifetime: 8334 hours (347 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 01 ff fc 00 00 10 cf 9d b4 40 00 Error: UNC at LBA = 0x10cf9db4 = 282041780 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 10 cf 9d b0 40 08 00:00:30.988 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:30.988 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:30.988 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:30.988 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:30.988 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 26/30 Celsius Lifetime Min/Max Temperature: 13/54 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (57) Index Estimated Time Temperature Celsius 58 2023-11-29 04:00 29 ********** ... ..( 13 skipped). .. ********** 72 2023-11-29 05:10 29 ********** 73 2023-11-29 05:15 28 ********* 74 2023-11-29 05:20 29 ********** 75 2023-11-29 05:25 29 ********** 76 2023-11-29 05:30 25 ****** 77 2023-11-29 05:35 27 ******** ... ..( 4 skipped). .. ******** 82 2023-11-29 06:00 27 ******** 83 2023-11-29 06:05 28 ********* ... ..( 4 skipped). .. ********* 88 2023-11-29 06:30 28 ********* 89 2023-11-29 06:35 29 ********** ... ..( 15 skipped). .. ********** 105 2023-11-29 07:55 29 ********** 106 2023-11-29 08:00 26 ******* 107 2023-11-29 08:05 27 ******** 108 2023-11-29 08:10 27 ******** 109 2023-11-29 08:15 27 ******** 110 2023-11-29 08:20 28 ********* ... ..( 11 skipped). .. ********* 122 2023-11-29 09:20 28 ********* 123 2023-11-29 09:25 29 ********** ... ..( 23 skipped). .. ********** 19 2023-11-29 11:25 29 ********** 20 2023-11-29 11:30 26 ******* 21 2023-11-29 11:35 27 ******** ... ..( 3 skipped). .. ******** 25 2023-11-29 11:55 27 ******** 26 2023-11-29 12:00 28 ********* ... ..( 7 skipped). .. ********* 34 2023-11-29 12:40 28 ********* 35 2023-11-29 12:45 29 ********** ... ..( 8 skipped). .. ********** 44 2023-11-29 13:30 29 ********** 45 2023-11-29 13:35 30 *********** 46 2023-11-29 13:40 30 *********** 47 2023-11-29 13:45 29 ********** 48 2023-11-29 13:50 30 *********** 49 2023-11-29 13:55 30 *********** 50 2023-11-29 14:00 29 ********** ... ..( 6 skipped). .. ********** 57 2023-11-29 14:35 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel 545s Series SSDs Device Model: INTEL SSDSC2KW512G8 Serial Number: -- LU WWN Device Id: 5 5cd2e4 ... Firmware Version: LHF002C User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 29 14:37:32 2023 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: request failed, error code 0x04 Wt Cache Reorder: Unknown (SCT Feature Control command failed) Read SMART Data failed: Input/output error === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 29/43 Celsius Lifetime Min/Max Temperature: 21/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 115 2023-11-29 12:31 37 ****************** 116 2023-11-29 12:32 37 ****************** 117 2023-11-29 12:33 34 *************** 118 2023-11-29 12:34 35 **************** ... ..( 7 skipped). .. **************** 126 2023-11-29 12:42 35 **************** 127 2023-11-29 12:43 36 ***************** ... ..( 10 skipped). .. ***************** 10 2023-11-29 12:54 36 ***************** 11 2023-11-29 12:55 37 ****************** ... ..( 17 skipped). .. ****************** 29 2023-11-29 13:13 37 ****************** 30 2023-11-29 13:14 40 ********************* 31 2023-11-29 13:15 40 ********************* 32 2023-11-29 13:16 41 ********************** 33 2023-11-29 13:17 39 ******************** 34 2023-11-29 13:18 41 ********************** 35 2023-11-29 13:19 41 ********************** 36 2023-11-29 13:20 42 *********************** 37 2023-11-29 13:21 42 *********************** 38 2023-11-29 13:22 39 ******************** 39 2023-11-29 13:23 37 ****************** ... ..( 6 skipped). .. ****************** 46 2023-11-29 13:30 37 ****************** 47 2023-11-29 13:31 36 ***************** 48 2023-11-29 13:32 40 ********************* 49 2023-11-29 13:33 40 ********************* 50 2023-11-29 13:34 38 ******************* 51 2023-11-29 13:35 40 ********************* 52 2023-11-29 13:36 40 ********************* 53 2023-11-29 13:37 29 ********** 54 2023-11-29 13:38 35 **************** 55 2023-11-29 13:39 36 ***************** 56 2023-11-29 13:40 36 ***************** 57 2023-11-29 13:41 38 ******************* 58 2023-11-29 13:42 38 ******************* 59 2023-11-29 13:43 35 **************** ... ..( 3 skipped). .. **************** 63 2023-11-29 13:47 35 **************** 64 2023-11-29 13:48 36 ***************** 65 2023-11-29 13:49 35 **************** 66 2023-11-29 13:50 35 **************** 67 2023-11-29 13:51 35 **************** 68 2023-11-29 13:52 36 ***************** ... ..( 2 skipped). .. ***************** 71 2023-11-29 13:55 36 ***************** 72 2023-11-29 13:56 40 ********************* 73 2023-11-29 13:57 40 ********************* 74 2023-11-29 13:58 41 ********************** 75 2023-11-29 13:59 40 ********************* 76 2023-11-29 14:00 40 ********************* 77 2023-11-29 14:01 36 ***************** 78 2023-11-29 14:02 36 ***************** 79 2023-11-29 14:03 37 ****************** 80 2023-11-29 14:04 38 ******************* 81 2023-11-29 14:05 36 ***************** 82 2023-11-29 14:06 37 ****************** ... ..( 3 skipped). .. ****************** 86 2023-11-29 14:10 37 ****************** 87 2023-11-29 14:11 38 ******************* 88 2023-11-29 14:12 37 ****************** 89 2023-11-29 14:13 37 ****************** 90 2023-11-29 14:14 38 ******************* 91 2023-11-29 14:15 38 ******************* 92 2023-11-29 14:16 38 ******************* 93 2023-11-29 14:17 40 ********************* 94 2023-11-29 14:18 42 *********************** 95 2023-11-29 14:19 42 *********************** 96 2023-11-29 14:20 43 ************************ 97 2023-11-29 14:21 43 ************************ 98 2023-11-29 14:22 38 ******************* ... ..( 4 skipped). .. ******************* 103 2023-11-29 14:27 38 ******************* 104 2023-11-29 14:28 37 ****************** 105 2023-11-29 14:29 37 ****************** 106 2023-11-29 14:30 37 ****************** 107 2023-11-29 14:31 38 ******************* 108 2023-11-29 14:32 39 ******************** 109 2023-11-29 14:33 38 ******************* 110 2023-11-29 14:34 41 ********************** 111 2023-11-29 14:35 41 ********************** 112 2023-11-29 14:36 38 ******************* 113 2023-11-29 14:37 38 ******************* 114 2023-11-29 14:38 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3318 --- Lifetime Power-On Resets 0x01 0x010 4 1633 --- Power-on Hours 0x01 0x018 6 29942457365 --- Logical Sectors Written 0x01 0x020 6 491558675 --- Number of Write Commands 0x01 0x028 6 34303391448 --- Logical Sectors Read 0x01 0x030 6 473111677 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 222 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 41 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 31 --- Lowest Temperature 0x05 0x030 1 43 --- Highest Average Short Term Temperature 0x05 0x038 1 34 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 85 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 17233 --- Number of Hardware Resets 0x06 0x018 4 372 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0005 2 0 R_ERR response for non-data FIS 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET /dev/da1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung Portable SSD T7 Serial Number: -- Firmware Version: FXG42P2Q PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 5 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 931,834,847,232 [931 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Wed Nov 29 14:38:32 2023 CST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 49 Celsius Critical Comp. Temp. Threshold: 53 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 4.83W - - 0 0 0 0 0 0 1 + 3.54W - - 1 1 1 1 0 0 2 + 3.04W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 26000 1000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 31 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 35,165,716 [18.0 TB] Data Units Written: 34,807,661 [17.8 TB] Host Read Commands: 174,102,575 Host Write Commands: 155,601,744 Controller Busy Time: 1,151 Power Cycles: 454 Power On Hours: 2,478 Unsafe Shutdowns: 173 Media and Data Integrity Errors: 0 Error Information Log Entries: 26 Warning Comp. Temperature Time: 150 Critical Comp. Temperature Time: 28 Temperature Sensor 1: 31 Celsius Temperature Sensor 2: 33 Celsius Warning: NVMe Get Log truncated to 0x200 bytes, 0x200 bytes zero filled Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Self-tests not supported