/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9160314AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001SDM1 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Mar 4 02:38:46 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 55) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 081 006 - 194930574 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2548 5 Reallocated_Sector_Ct PO--CK 098 098 036 - 52 7 Seek_Error_Rate POSR-- 078 060 030 - 75103820 9 Power_On_Hours -O--CK 082 082 000 - 16437 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 037 020 - 2498 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 22755 188 Command_Timeout -O--CK 100 098 000 - 42950328832 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 042 045 Past 40 (Min/Max 27/40 #5) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 108 192 Power-Off_Retract_Count -O--CK 100 100 000 - 7 193 Load_Cycle_Count -O--CK 001 001 000 - 1432890 194 Temperature_Celsius -O---K 040 058 000 - 40 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 063 057 000 - 194930574 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 23336 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 23336 [15] occurred at disk power-on lifetime: 12682 hours (528 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 71 00 00 00 00 00 00 00 80 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 00 00 00 01 00 00 00 00 00 10 a0 00 6d+01:58:21.694 READ LOG EXT 61 00 00 00 02 00 00 01 ca 8d de 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 ca 8b 5e 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 ca 88 ee 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 0e 00 00 01 ca 80 80 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED Error 23335 [14] occurred at disk power-on lifetime: 12682 hours (528 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 71 00 00 00 00 00 00 00 80 40 00 Device Fault; Error: ABRT at LBA = 0x00000080 = 128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 02 00 00 01 ca 8d de 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 ca 8b 5e 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 ca 88 ee 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 0e 00 00 01 ca 80 80 40 00 6d+01:58:21.653 WRITE FPDMA QUEUED 61 00 00 00 02 00 00 01 ca 8d ce 40 00 6d+01:58:21.652 WRITE FPDMA QUEUED Error 23334 [13] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: WP at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 20 00 00 0a 23 74 20 40 00 00:06:52.108 WRITE FPDMA QUEUED 60 00 00 00 20 00 00 05 53 1e e0 40 00 00:06:52.105 READ FPDMA QUEUED 60 00 00 00 08 00 00 0e ad 25 f8 40 00 00:06:52.103 READ FPDMA QUEUED 61 00 00 00 dc 00 00 0c c2 a9 80 40 00 00:06:52.100 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 0c c2 a2 80 40 00 00:06:52.098 WRITE FPDMA QUEUED Error 23333 [12] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: WP at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 00 00 05 82 e0 40 00 00:06:49.404 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 36 04 18 40 00 00:06:49.402 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 03 4a 28 40 00 00:06:49.401 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 81 82 90 40 00 00:06:49.401 WRITE FPDMA QUEUED 61 00 00 00 04 00 00 00 7e 41 b8 40 00 00:06:49.397 WRITE FPDMA QUEUED Error 23332 [11] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: WP at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 20 00 00 0a 23 74 20 40 00 00:06:46.672 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 33 d0 c0 40 00 00:06:46.671 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 5f 02 c8 40 00 00:06:46.668 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 0e 5f 41 a0 40 00 00:06:46.667 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 0e 5f 40 a0 40 00 00:06:46.665 WRITE FPDMA QUEUED Error 23331 [10] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: UNC at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 0e ab 3f 18 40 00 00:06:43.817 READ FPDMA QUEUED 61 00 00 01 00 00 00 10 87 5c 58 40 00 00:06:43.816 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 5b 58 40 00 00:06:43.815 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 5a 58 40 00 00:06:43.814 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 59 58 40 00 00:06:43.813 WRITE FPDMA QUEUED Error 23330 [9] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: WP at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 01 00 00 00 05 6b d0 c0 40 00 00:06:41.203 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 05 6b cf c0 40 00 00:06:41.202 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 05 6b ce c0 40 00 00:06:41.199 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 05 6b cd c0 40 00 00:06:41.196 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 08 29 40 a0 40 00 00:06:41.195 WRITE FPDMA QUEUED Error 23329 [8] occurred at disk power-on lifetime: 6533 hours (272 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 24 3c f0 00 00 Error: WP at LBA = 0x03243cf0 = 52706544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 01 00 00 00 10 87 3c 58 40 00 00:06:38.424 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 3b 58 40 00 00:06:38.423 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 3a 58 40 00 00:06:38.422 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 39 58 40 00 00:06:38.421 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 10 87 38 58 40 00 00:06:38.420 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 27/40 Celsius Lifetime Min/Max Temperature: 13/58 Celsius Under/Over Temperature Limit Count: 0/115 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (66) Index Estimated Time Temperature Celsius 67 2021-03-04 00:31 41 ********************** ... ..( 10 skipped). .. ********************** 78 2021-03-04 00:42 41 ********************** 79 2021-03-04 00:43 ? - 80 2021-03-04 00:44 27 ******** 81 2021-03-04 00:45 27 ******** 82 2021-03-04 00:46 28 ********* 83 2021-03-04 00:47 28 ********* 84 2021-03-04 00:48 29 ********** 85 2021-03-04 00:49 30 *********** 86 2021-03-04 00:50 31 ************ 87 2021-03-04 00:51 31 ************ 88 2021-03-04 00:52 32 ************* 89 2021-03-04 00:53 32 ************* 90 2021-03-04 00:54 33 ************** 91 2021-03-04 00:55 33 ************** 92 2021-03-04 00:56 34 *************** 93 2021-03-04 00:57 34 *************** 94 2021-03-04 00:58 34 *************** 95 2021-03-04 00:59 35 **************** 96 2021-03-04 01:00 35 **************** 97 2021-03-04 01:01 35 **************** 98 2021-03-04 01:02 36 ***************** ... ..( 2 skipped). .. ***************** 101 2021-03-04 01:05 36 ***************** 102 2021-03-04 01:06 37 ****************** ... ..( 3 skipped). .. ****************** 106 2021-03-04 01:10 37 ****************** 107 2021-03-04 01:11 38 ******************* ... ..( 3 skipped). .. ******************* 111 2021-03-04 01:15 38 ******************* 112 2021-03-04 01:16 39 ******************** ... ..( 13 skipped). .. ******************** 126 2021-03-04 01:30 39 ******************** 127 2021-03-04 01:31 40 ********************* 0 2021-03-04 01:32 39 ******************** 1 2021-03-04 01:33 40 ********************* ... ..( 9 skipped). .. ********************* 11 2021-03-04 01:43 40 ********************* 12 2021-03-04 01:44 39 ******************** ... ..( 26 skipped). .. ******************** 39 2021-03-04 02:11 39 ******************** 40 2021-03-04 02:12 40 ********************* ... ..( 2 skipped). .. ********************* 43 2021-03-04 02:15 40 ********************* 44 2021-03-04 02:16 39 ******************** ... ..( 7 skipped). .. ******************** 52 2021-03-04 02:24 39 ******************** 53 2021-03-04 02:25 40 ********************* ... ..( 12 skipped). .. ********************* 66 2021-03-04 02:38 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: SanDisk SDSSDA240G Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: Z32080RL User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 4 02:38:46 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Retired_Block_Count -O--CK 100 100 000 - 0 9 Power_On_Hours_and_Msec -O--CK 000 100 000 - 16884h+00m+00.000s 12 Power_Cycle_Count -O--CK 100 100 000 - 5713 165 Unknown_Attribute -O--CK 100 100 000 - 20861024736525 166 Unknown_Attribute -O--CK 100 100 000 - 42 167 Unknown_Attribute -O--CK 100 100 000 - 0 168 Unknown_Attribute -O--CK 100 100 000 - 75 169 Unknown_Attribute -O--CK 100 100 000 - 0 170 Reserve_Block_Count -O--CK 100 100 000 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Unknown_SandForce_Attr -O--CK 100 100 000 - 65 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3135 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 057 027 000 - 43 (Min/Max 0/73) 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 230 Life_Curve_Status -O--CK 100 100 000 - 7713822279428 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 SandForce_Internal -O--CK 100 100 000 - 15603 234 SandForce_Internal -O--CK 100 100 000 - 56195 241 Lifetime_Writes_GiB ----CK 253 253 000 - 27546 242 Lifetime_Reads_GiB ----CK 253 253 000 - 58540 244 Unknown_Attribute -O--CK 000 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15223 - # 2 Short offline Completed without error 00% 15211 - # 3 Short offline Completed without error 00% 15200 - # 4 Short offline Completed without error 00% 15190 - # 5 Short offline Completed without error 00% 15180 - # 6 Short offline Completed without error 00% 15169 - # 7 Short offline Completed without error 00% 15153 - # 8 Short offline Completed without error 00% 15141 - # 9 Extended offline Completed without error 00% 15139 - #10 Short offline Completed without error 00% 14129 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5713 --- Lifetime Power-On Resets 0x01 0x010 4 16884 --- Power-on Hours 0x01 0x018 6 1935019082 --- Logical Sectors Written 0x01 0x020 6 707923031 --- Number of Write Commands 0x01 0x028 6 2508610381 --- Logical Sectors Read 0x01 0x030 6 1240993456 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 13 Device-to-host register FISes sent due to a COMRESET /dev/ada2 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00RKKA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 4 02:38:46 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10740) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 124) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 51 3 Spin_Up_Time POS--K 176 172 021 - 2191 4 Start_Stop_Count -O--CK 090 090 000 - 10995 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 043 043 000 - 42140 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 091 091 000 - 9814 192 Power-Off_Retract_Count -O--CK 193 193 000 - 5425 193 Load_Cycle_Count -O--CK 199 199 000 - 5569 194 Temperature_Celsius -O---K 105 091 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 158 000 - 10834 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 51 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 51 [2] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c7 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc7 = 34020295 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c7 e0 00 01:09:43.534 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:43.534 WRITE DMA EXT 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:43.533 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c7 e0 00 01:09:41.674 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:41.673 READ DMA EXT Error 50 [1] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c7 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc7 = 34020295 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c7 e0 00 01:09:41.674 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:41.673 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:41.673 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:41.672 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:41.672 WRITE DMA EXT Error 49 [0] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c6 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc6 = 34020294 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:39.805 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:39.805 WRITE DMA EXT 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:39.804 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:37.945 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:37.944 READ DMA EXT Error 48 [23] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c6 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc6 = 34020294 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c6 e0 00 01:09:37.945 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:37.944 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:37.944 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:37.943 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:37.943 WRITE DMA EXT Error 47 [22] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c5 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc5 = 34020293 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:36.067 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:36.067 WRITE DMA EXT 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:36.066 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:34.207 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:34.206 READ DMA EXT Error 46 [21] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c5 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc5 = 34020293 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c5 e0 00 01:09:34.207 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:34.206 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:34.206 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:34.205 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:34.205 WRITE DMA EXT Error 45 [20] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c4 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc4 = 34020292 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:32.329 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:32.329 WRITE DMA EXT 25 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:32.328 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:30.460 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:30.460 READ DMA EXT Error 44 [19] occurred at disk power-on lifetime: 17420 hours (725 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 02 07 1b c4 e0 00 Error: UNC 1 sectors at LBA = 0x02071bc4 = 34020292 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 02 07 1b c4 e0 00 01:09:30.460 READ DMA EXT 25 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:30.460 READ DMA EXT 35 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:30.460 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c2 e0 00 01:09:30.459 WRITE DMA EXT 35 20 20 00 01 00 00 02 07 1b c3 e0 00 01:09:30.459 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40265 - # 2 Short offline Completed without error 00% 40252 - # 3 Short offline Completed without error 00% 40240 - # 4 Short offline Completed without error 00% 40226 - # 5 Short offline Completed without error 00% 40214 - # 6 Short offline Completed without error 00% 40202 - # 7 Short offline Completed without error 00% 40185 - # 8 Short offline Completed without error 00% 40171 - # 9 Extended offline Interrupted (host reset) 50% 40170 - #10 Short offline Aborted by host 80% 38935 - #11 Short offline Completed without error 00% 25650 - #12 Short offline Completed: read failure 90% 17417 34014448 #13 Short offline Completed: read failure 90% 17417 34014448 #14 Short offline Completed without error 00% 6834 - #15 Short offline Completed without error 00% 123 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 25/38 Celsius Lifetime Min/Max Temperature: 25/52 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (7) Index Estimated Time Temperature Celsius 8 2021-03-03 18:41 40 ********************* ... ..( 31 skipped). .. ********************* 40 2021-03-03 19:13 40 ********************* 41 2021-03-03 19:14 39 ******************** ... ..( 66 skipped). .. ******************** 108 2021-03-03 20:21 39 ******************** 109 2021-03-03 20:22 40 ********************* ... ..( 15 skipped). .. ********************* 125 2021-03-03 20:38 40 ********************* 126 2021-03-03 20:39 ? - 127 2021-03-03 20:40 40 ********************* ... ..( 14 skipped). .. ********************* 142 2021-03-03 20:55 40 ********************* 143 2021-03-03 20:56 39 ******************** ... ..( 47 skipped). .. ******************** 191 2021-03-03 21:44 39 ******************** 192 2021-03-03 21:45 ? - 193 2021-03-03 21:46 40 ********************* ... ..( 34 skipped). .. ********************* 228 2021-03-03 22:21 40 ********************* 229 2021-03-03 22:22 ? - 230 2021-03-03 22:23 40 ********************* ... ..( 14 skipped). .. ********************* 245 2021-03-03 22:38 40 ********************* 246 2021-03-03 22:39 39 ******************** ... ..( 40 skipped). .. ******************** 287 2021-03-03 23:20 39 ******************** 288 2021-03-03 23:21 38 ******************* ... ..( 50 skipped). .. ******************* 339 2021-03-04 00:12 38 ******************* 340 2021-03-04 00:13 39 ******************** ... ..( 18 skipped). .. ******************** 359 2021-03-04 00:32 39 ******************** 360 2021-03-04 00:33 ? - 361 2021-03-04 00:34 25 ****** 362 2021-03-04 00:35 26 ******* 363 2021-03-04 00:36 26 ******* 364 2021-03-04 00:37 27 ******** 365 2021-03-04 00:38 27 ******** 366 2021-03-04 00:39 28 ********* 367 2021-03-04 00:40 29 ********** 368 2021-03-04 00:41 30 *********** 369 2021-03-04 00:42 30 *********** 370 2021-03-04 00:43 30 *********** 371 2021-03-04 00:44 31 ************ 372 2021-03-04 00:45 31 ************ 373 2021-03-04 00:46 32 ************* 374 2021-03-04 00:47 32 ************* 375 2021-03-04 00:48 33 ************** 376 2021-03-04 00:49 33 ************** 377 2021-03-04 00:50 33 ************** 378 2021-03-04 00:51 34 *************** 379 2021-03-04 00:52 34 *************** 380 2021-03-04 00:53 35 **************** ... ..( 8 skipped). .. **************** 389 2021-03-04 01:02 35 **************** 390 2021-03-04 01:03 36 ***************** ... ..( 4 skipped). .. ***************** 395 2021-03-04 01:08 36 ***************** 396 2021-03-04 01:09 37 ****************** ... ..( 17 skipped). .. ****************** 414 2021-03-04 01:27 37 ****************** 415 2021-03-04 01:28 38 ******************* ... ..( 16 skipped). .. ******************* 432 2021-03-04 01:45 38 ******************* 433 2021-03-04 01:46 37 ****************** ... ..( 29 skipped). .. ****************** 463 2021-03-04 02:16 37 ****************** 464 2021-03-04 02:17 38 ******************* ... ..( 8 skipped). .. ******************* 473 2021-03-04 02:26 38 ******************* 474 2021-03-04 02:27 40 ********************* ... ..( 10 skipped). .. ********************* 7 2021-03-04 02:38 40 ********************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6865 Vendor specific