/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SK hynix SATA SSDs Device Model: SK hynix SC210 mSATA 256GB Serial Number: -- Firmware Version: 20001L00 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 26 20:30:02 2022 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3) seconds. Offline data collection capabilities: (0x19) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 17) minutes. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 5 Retired_Block_Count -O--CK 253 253 036 - 0 9 Power_On_Hours -O--CK 089 089 000 - 9948 12 Power_Cycle_Count -O--CK 100 100 020 - 782 100 Total_Erase_Count -O--CK 100 100 000 - 1837380 171 Program_Fail_Count -O--CK 253 253 000 - 0 172 Erase_Fail_Count -O--CK 253 253 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 92 175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 177 Wear_Leveling_Count -O--CK 100 100 000 - 27 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 29 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 167 180 Erase_Fail_Count -O--CK 100 100 000 - 4185 181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 183 SATA_Downshift_Count -O--CK 253 253 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 12 188 Command_Timeout -O--CK 253 253 000 - 0 191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0 194 Temperature_Celsius -O---- 034 000 000 - 34 (Min/Max 12/56) 195 Hardware_ECC_Recovered -O--CK 100 099 000 - 1598283773 201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 204 Soft_ECC_Correction -OSR-- 100 100 --- - 0 231 SSD_Life_Left PO--CK 253 253 --- - 0 234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 6825 241 Total_Writes_GB -O--CK 100 100 --- - 4932 242 Total_Reads_GB -O--CK 100 100 --- - 9145 250 Read_Retry_Count -O--CK 253 253 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 4 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 3869 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3869 [8] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:59.790 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:59.790 NOP [Abort queued commands] 25 00 00 00 01 00 00 09 89 9f 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 20 00 00 05 d4 7b 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 38 00 00 08 0d e5 40 40 40 2d+01:00:54.670 READ DMA EXT Error 3868 [7] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 09 89 9f 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 20 00 00 05 d4 7b 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 38 00 00 08 0d e5 40 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 10 00 00 08 4c 72 f0 40 40 2d+01:00:54.660 READ DMA EXT 25 00 00 00 10 00 00 08 4c b0 60 40 40 2d+01:00:54.660 READ DMA EXT Error 3867 [6] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 09 89 9f 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 20 00 00 05 d4 7b 10 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 38 00 00 08 0d e5 40 40 40 2d+01:00:54.670 READ DMA EXT 25 00 00 00 10 00 00 08 4c 72 f0 40 40 2d+01:00:54.660 READ DMA EXT 25 00 00 00 10 00 00 08 4c b0 60 40 40 2d+01:00:54.660 READ DMA EXT Error 3866 [5] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:47.100 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:47.100 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:47.100 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:47.100 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+01:00:47.000 IDENTIFY DEVICE Error 3865 [4] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 90 00 06 00 00 00 00 00 00 00 00 2d+01:00:42.980 SET FEATURES [Disable SATA feature] e1 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:42.290 IDLE IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:41.410 FLUSH CACHE EXT 61 00 08 00 88 00 00 00 00 00 29 40 40 2d+01:00:41.300 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:41.300 FLUSH CACHE EXT Error 3864 [3] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 90 00 06 00 00 00 00 00 00 00 00 2d+01:00:42.980 SET FEATURES [Disable SATA feature] e1 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:42.290 IDLE IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:41.410 FLUSH CACHE EXT 61 00 08 00 88 00 00 00 00 00 29 40 40 2d+01:00:41.300 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 40 2d+01:00:41.300 FLUSH CACHE EXT Error 3863 [2] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+00:49:25.320 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+00:49:25.320 NOP [Abort queued commands] 25 00 00 00 01 00 00 09 89 9f 10 40 40 2d+00:49:20.170 READ DMA EXT 25 00 00 00 08 00 00 04 08 4f 18 40 40 2d+00:49:20.170 READ DMA EXT 25 00 00 00 38 00 00 05 d5 76 18 40 40 2d+00:49:20.170 READ DMA EXT Error 3862 [1] occurred at disk power-on lifetime: 9944 hours (414 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 09 89 9f 10 40 40 2d+00:49:20.170 READ DMA EXT 25 00 00 00 08 00 00 04 08 4f 18 40 40 2d+00:49:20.170 READ DMA EXT 25 00 00 00 38 00 00 05 d5 76 18 40 40 2d+00:49:20.170 READ DMA EXT 25 00 00 00 10 00 00 08 4c 72 f0 40 40 2d+00:49:20.160 READ DMA EXT 25 00 00 00 10 00 00 07 8d ab 98 40 40 2d+00:49:20.160 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (empty) == 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (empty) == 0x07 ===== = = === == Solid State Device Statistics (empty) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 19 Device-to-host register FISes sent due to a COMRESET /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA KSG60ZMV256G M.2 2280 256GB Serial Number: -- LU WWN Device Id: 5 00080d ... Firmware Version: ABDA4101 User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 26 20:30:02 2022 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 11) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 100 9 Power_On_Hours -O--CK 100 100 000 - 4310 12 Power_Cycle_Count PO--CK 100 100 000 - 1087 166 Unknown_Attribute -O--C- 100 100 000 - 0 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 173 Unknown_Attribute -O--C- 188 188 000 - 0 175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--CK 088 088 010 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 100 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 100 181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 100 182 Erase_Fail_Count_Total PO--CK 100 100 010 - 100 187 Reported_Uncorrect PO--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 97 194 Temperature_Celsius -O---K 061 030 000 - 39 (Min/Max 8/70) 195 Hardware_ECC_Recovered PO-R-K 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 238 Unknown_Attribute -O--CK 088 088 010 - 0 241 Total_LBAs_Written PO--C- 100 100 000 - 158164 242 Total_LBAs_Read PO--C- 100 100 000 - 450181 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 29408 Current Device Internal Status Data log 0x25 GPL R/O 24577 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4160 - # 2 Short offline Completed without error 00% 4118 - # 3 Short offline Aborted by host 00% 4118 - # 4 Short offline Interrupted (host reset) 00% 4117 - # 5 Short offline Interrupted (host reset) 00% 4117 - # 6 Short offline Interrupted (host reset) 00% 4117 - # 7 Short offline Completed without error 00% 3938 - # 8 Short offline Completed without error 00% 3805 - # 9 Short offline Completed without error 00% 3681 - #10 Short offline Completed without error 00% 3217 - #11 Short offline Completed without error 00% 3108 - #12 Short offline Completed without error 00% 2496 - #13 Short offline Completed without error 00% 2240 - #14 Short offline Completed without error 00% 2110 - #15 Short offline Completed without error 00% 1838 - #16 Short offline Completed without error 00% 1716 - #17 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 3 (0x0003) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 30/40 Celsius Lifetime Min/Max Temperature: 8/70 Celsius Specified Max Operating Temperature: 40 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) Minimum supported ERC Time Limit: 80 (8.0 seconds) Vendor specific: 00 00 04 00 01 01 00 05 05 00 00 00 00 f2 56 80 00 02 00 00 8f c4 ec 00 08 00 00 00 00 00 00 0f SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/40 Celsius Min/Max Temperature Limit: 0/80 Celsius Temperature History Size (Index): 128 (39) Index Estimated Time Temperature Celsius 40 2022-07-26 18:23 39 ******************** ... ..(126 skipped). .. ******************** 39 2022-07-26 20:30 39 ******************** SCT Error Recovery Control: Read: 600 (60.0 seconds) Write: 600 (60.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 3) == 0x01 0x008 4 1087 --- Lifetime Power-On Resets 0x01 0x010 4 4310 --- Power-on Hours 0x01 0x018 6 10365475751 --- Logical Sectors Written 0x01 0x020 6 459478135 --- Number of Write Commands 0x01 0x028 6 29503115153 --- Logical Sectors Read 0x01 0x030 6 889426441 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 39 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 59 --- Highest Temperature 0x05 0x028 1 19 --- Lowest Temperature 0x05 0x030 1 54 --- Highest Average Short Term Temperature 0x05 0x038 1 25 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 94110 --- Time in Over-Temperature 0x05 0x058 1 40 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2425 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 15 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 22 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 23 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC