/dev/sd0 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: W653-64GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: ZD0R024L User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 30 00:54:37 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x59) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5946 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51 161 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 162 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 35623 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3000 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 50 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 168 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 169 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 99 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11 175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 4654885 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 40 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 206 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 43 207 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 57 232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 66 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 2070 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1178 249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 760 250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 2258 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more