Probe #35f1c905eb of Yanling YL-KBR6L Desktop Computer

Log: smartctl

/dev/sd0c smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Kingston SSDNow UV400/500 Device Model: KINGSTON SUV500MS480G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 003056RR User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: mSATA TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 3 22:53:53 2021 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 5) minutes. Conveyance self-test routine recommended polling time: ( 0) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 48 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 551 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3802 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18 100 Unknown_Kingston_Attr 0x0032 100 100 000 Old_age Always - 309344 101 Unknown_Kingston_Attr 0x0032 100 100 000 Old_age Always - 31872 170 Reserved_Block_Count 0x0032 100 100 000 Old_age Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 10 175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 109 178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 1385 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 054 100 000 Old_age Always - 54 (Min/Max 22/63) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 551 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 201 Unc_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 551 231 SSD_Life_Left 0x0032 100 100 000 Old_age Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 1110 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 374 241 Host_Writes_GiB 0x0032 100 100 000 Old_age Always - 629 242 Host_Reads_GiB 0x0032 100 100 000 Old_age Always - 29 250 Read_Retry_Count 0x0032 100 100 000 Old_age Always - 5808 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 0 Warning: ATA Specification requires self-test log structure revision number = 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.


Hardware for Linux and BSD

GitHub