/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST250DM000-1BD141 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: KC45 User Capacity: 250,059,350,016 bytes [250 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 4 11:01:42 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 41) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 111 099 006 - 30340600 3 Spin_Up_Time PO---- 100 097 000 - 0 4 Start_Stop_Count -O--CK 091 091 020 - 9906 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 314589689 9 Power_On_Hours -O--CK 061 061 000 - 34967 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 091 091 020 - 9759 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 098 098 000 - 2 188 Command_Timeout -O--CK 100 096 000 - 3 3 6 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 060 045 - 33 (Min/Max 31/36) 194 Temperature_Celsius -O---K 033 040 000 - 33 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 039 036 000 - 30340600 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 34887h+40m+14.591s 241 Total_LBAs_Written ------ 100 253 000 - 4003199925 242 Total_LBAs_Read ------ 100 253 000 - 4164774180 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 34701 hours (1445 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 2c ba b0 00 00 Error: UNC at LBA = 0x012cbab0 = 19708592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 01 2c ba a0 40 00 00:00:57.580 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 60 08 50 40 00 00:00:57.580 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 5c e5 50 40 00 00:00:57.579 WRITE FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:56.944 IDENTIFY DEVICE ef 00 10 00 03 00 00 00 00 00 00 00 00 00:00:56.913 SET FEATURES [Enable SATA feature] Error 1 [0] occurred at disk power-on lifetime: 34701 hours (1445 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 2c ba b0 00 00 Error: UNC at LBA = 0x012cbab0 = 19708592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 01 2c b9 20 40 00 00:00:52.834 READ FPDMA QUEUED 60 00 00 00 80 00 00 01 2c b8 a0 40 00 00:00:52.831 READ FPDMA QUEUED 60 00 00 00 40 00 00 01 2c b7 60 40 00 00:00:52.823 READ FPDMA QUEUED 60 00 00 00 20 00 00 01 2c b6 e0 40 00 00:00:52.821 READ FPDMA QUEUED 60 00 00 00 40 00 00 01 2c b3 40 40 00 00:00:52.819 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 31/36 Celsius Lifetime Min/Max Temperature: 11/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 115 2021-08-30 05:23 32 ************* ... ..( 8 skipped). .. ************* 124 2021-08-30 14:14 32 ************* 125 2021-08-30 15:13 33 ************** 126 2021-08-30 16:12 32 ************* 127 2021-08-30 17:11 32 ************* 0 2021-08-30 18:10 32 ************* 1 2021-08-30 19:09 33 ************** ... ..( 3 skipped). .. ************** 5 2021-08-30 23:05 33 ************** 6 2021-08-31 00:04 32 ************* ... ..( 7 skipped). .. ************* 14 2021-08-31 07:56 32 ************* 15 2021-08-31 08:55 31 ************ 16 2021-08-31 09:54 31 ************ 17 2021-08-31 10:53 32 ************* 18 2021-08-31 11:52 32 ************* 19 2021-08-31 12:51 32 ************* 20 2021-08-31 13:50 33 ************** 21 2021-08-31 14:49 33 ************** 22 2021-08-31 15:48 33 ************** 23 2021-08-31 16:47 32 ************* 24 2021-08-31 17:46 33 ************** ... ..( 2 skipped). .. ************** 27 2021-08-31 20:43 33 ************** 28 2021-08-31 21:42 32 ************* ... ..( 5 skipped). .. ************* 34 2021-09-01 03:36 32 ************* 35 2021-09-01 04:35 33 ************** 36 2021-09-01 05:34 32 ************* ... ..( 10 skipped). .. ************* 47 2021-09-01 16:23 32 ************* 48 2021-09-01 17:22 33 ************** ... ..( 3 skipped). .. ************** 52 2021-09-01 21:18 33 ************** 53 2021-09-01 22:17 32 ************* ... ..( 2 skipped). .. ************* 56 2021-09-02 01:14 32 ************* 57 2021-09-02 02:13 31 ************ 58 2021-09-02 03:12 31 ************ 59 2021-09-02 04:11 32 ************* 60 2021-09-02 05:10 31 ************ ... ..( 2 skipped). .. ************ 63 2021-09-02 08:07 31 ************ 64 2021-09-02 09:06 32 ************* ... ..( 4 skipped). .. ************* 69 2021-09-02 14:01 32 ************* 70 2021-09-02 15:00 33 ************** 71 2021-09-02 15:59 33 ************** 72 2021-09-02 16:58 32 ************* 73 2021-09-02 17:57 33 ************** ... ..( 3 skipped). .. ************** 77 2021-09-02 21:53 33 ************** 78 2021-09-02 22:52 32 ************* ... ..( 3 skipped). .. ************* 82 2021-09-03 02:48 32 ************* 83 2021-09-03 03:47 31 ************ ... ..( 5 skipped). .. ************ 89 2021-09-03 09:41 31 ************ 90 2021-09-03 10:40 32 ************* 91 2021-09-03 11:39 33 ************** 92 2021-09-03 12:38 35 **************** 93 2021-09-03 13:37 36 ***************** 94 2021-09-03 14:36 36 ***************** 95 2021-09-03 15:35 35 **************** 96 2021-09-03 16:34 33 ************** 97 2021-09-03 17:33 33 ************** 98 2021-09-03 18:32 34 *************** ... ..( 2 skipped). .. *************** 101 2021-09-03 21:29 34 *************** 102 2021-09-03 22:28 35 **************** 103 2021-09-03 23:27 35 **************** 104 2021-09-04 00:26 33 ************** 105 2021-09-04 01:25 32 ************* ... ..( 2 skipped). .. ************* 108 2021-09-04 04:22 32 ************* 109 2021-09-04 05:21 31 ************ 110 2021-09-04 06:20 31 ************ 111 2021-09-04 07:19 32 ************* 112 2021-09-04 08:18 32 ************* 113 2021-09-04 09:17 32 ************* 114 2021-09-04 10:16 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS