Probe #2fd8e3ef17 of HP 1998 Desktop Computer (EliteDesk 800 G1 SFF)

Log: smartctl

/dev/ada0 smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SU800 Serial Number: -- LU WWN Device Id: 5 707c18 ... Firmware Version: 02K0S86D User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.5/5706 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 1 15:31:29 2025 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 12384 12 Power_Cycle_Count ------ 100 100 000 - 6107 160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 161 Valid_Spare_Block_Cnt ------ 100 100 000 - 47 163 Initial_Bad_Block_Count ------ 100 100 000 - 8 164 Total_Erase_Count ------ 100 100 000 - 177219 165 Max_Erase_Count ------ 100 100 000 - 171 166 Min_Erase_Count ------ 100 100 000 - 76 167 Average_Erase_Count ------ 100 100 000 - 131 168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 169 Remaining_Lifetime_Perc ------ 100 100 000 - 87 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 050 - 220 178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 271 194 Temperature_Celsius ------ 100 100 000 - 15 195 Hardware_ECC_Recovered ------ 100 100 000 - 0 196 Reallocated_Event_Count ------ 100 100 016 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 050 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Host_Writes_32MiB ------ 100 100 000 - 1038079 242 Host_Reads_32MiB ------ 100 100 000 - 328519 245 TLC_Writes_32MiB ------ 100 100 000 - 1417752 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: -1/ 0 Celsius Lifetime Min/Max Temperature: 0/33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (104) Index Estimated Time Temperature Celsius 105 2025-07-01 13:24 20 * 106 2025-07-01 13:25 19 - ... ..( 5 skipped). .. - 112 2025-07-01 13:31 19 - 113 2025-07-01 13:32 20 * 114 2025-07-01 13:33 20 * 115 2025-07-01 13:34 19 - ... ..( 2 skipped). .. - 118 2025-07-01 13:37 19 - 119 2025-07-01 13:38 20 * 120 2025-07-01 13:39 22 *** 121 2025-07-01 13:40 27 ******** 122 2025-07-01 13:41 27 ******** 123 2025-07-01 13:42 24 ***** 124 2025-07-01 13:43 22 *** 125 2025-07-01 13:44 20 * ... ..( 2 skipped). .. * 0 2025-07-01 13:47 20 * 1 2025-07-01 13:48 22 *** 2 2025-07-01 13:49 19 - 3 2025-07-01 13:50 19 - 4 2025-07-01 13:51 20 * 5 2025-07-01 13:52 24 ***** 6 2025-07-01 13:53 19 - ... ..( 5 skipped). .. - 12 2025-07-01 13:59 19 - 13 2025-07-01 14:00 20 * 14 2025-07-01 14:01 19 - 15 2025-07-01 14:02 20 * 16 2025-07-01 14:03 19 - ... ..( 5 skipped). .. - 22 2025-07-01 14:09 19 - 23 2025-07-01 14:10 20 * 24 2025-07-01 14:11 22 *** 25 2025-07-01 14:12 24 ***** 26 2025-07-01 14:13 24 ***** 27 2025-07-01 14:14 22 *** 28 2025-07-01 14:15 22 *** 29 2025-07-01 14:16 20 * ... ..( 2 skipped). .. * 32 2025-07-01 14:19 20 * 33 2025-07-01 14:20 22 *** 34 2025-07-01 14:21 19 - 35 2025-07-01 14:22 19 - 36 2025-07-01 14:23 24 ***** 37 2025-07-01 14:24 19 - ... ..( 2 skipped). .. - 40 2025-07-01 14:27 19 - 41 2025-07-01 14:28 22 *** 42 2025-07-01 14:29 20 * 43 2025-07-01 14:30 22 *** 44 2025-07-01 14:31 19 - ... ..( 2 skipped). .. - 47 2025-07-01 14:34 19 - 48 2025-07-01 14:35 20 * 49 2025-07-01 14:36 19 - ... ..( 9 skipped). .. - 59 2025-07-01 14:46 19 - 60 2025-07-01 14:47 20 * 61 2025-07-01 14:48 26 ******* 62 2025-07-01 14:49 24 ***** 63 2025-07-01 14:50 22 *** 64 2025-07-01 14:51 22 *** 65 2025-07-01 14:52 24 ***** 66 2025-07-01 14:53 26 ******* 67 2025-07-01 14:54 22 *** 68 2025-07-01 14:55 20 * ... ..( 3 skipped). .. * 72 2025-07-01 14:59 20 * 73 2025-07-01 15:00 19 - 74 2025-07-01 15:01 19 - 75 2025-07-01 15:02 24 ***** 76 2025-07-01 15:03 20 * 77 2025-07-01 15:04 19 - ... ..( 22 skipped). .. - 100 2025-07-01 15:27 19 - 101 2025-07-01 15:28 20 * 102 2025-07-01 15:29 24 ***** 103 2025-07-01 15:30 15 - 104 2025-07-01 15:31 20 * SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 6107 --- Lifetime Power-On Resets 0x01 0x010 4 12384 --- Power-on Hours 0x01 0x018 6 3607068116 --- Logical Sectors Written 0x01 0x020 6 1057463922 --- Number of Write Commands 0x01 0x028 6 55027936 --- Logical Sectors Read 0x01 0x030 6 333308624 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 271 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 30141 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 13 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub