/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3J0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 6 12:00:22 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 175) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 161 161 040 - 97 3 Spin_Up_Time POS--- 120 120 033 - 2 4 Start_Stop_Count -O--C- 100 100 000 - 127 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 040 - 34 9 Power_On_Hours -O--C- 100 100 000 - 113 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 126 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 193 Load_Cycle_Count -O--C- 100 100 000 - 2627 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 10/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 26/34 Celsius Lifetime Min/Max Temperature: 10/52 Celsius Specified Max Operating Temperature: 40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (46) Index Estimated Time Temperature Celsius 47 2020-05-06 09:53 46 *************************** ... ..( 6 skipped). .. *************************** 54 2020-05-06 10:00 46 *************************** 55 2020-05-06 10:01 47 **************************** 56 2020-05-06 10:02 46 *************************** ... ..( 2 skipped). .. *************************** 59 2020-05-06 10:05 46 *************************** 60 2020-05-06 10:06 47 **************************** ... ..( 26 skipped). .. **************************** 87 2020-05-06 10:33 47 **************************** 88 2020-05-06 10:34 46 *************************** 89 2020-05-06 10:35 46 *************************** 90 2020-05-06 10:36 46 *************************** 91 2020-05-06 10:37 47 **************************** ... ..( 5 skipped). .. **************************** 97 2020-05-06 10:43 47 **************************** 98 2020-05-06 10:44 46 *************************** 99 2020-05-06 10:45 47 **************************** 100 2020-05-06 10:46 46 *************************** ... ..( 4 skipped). .. *************************** 105 2020-05-06 10:51 46 *************************** 106 2020-05-06 10:52 47 **************************** 107 2020-05-06 10:53 46 *************************** ... ..( 11 skipped). .. *************************** 119 2020-05-06 11:05 46 *************************** 120 2020-05-06 11:06 47 **************************** 121 2020-05-06 11:07 47 **************************** 122 2020-05-06 11:08 46 *************************** ... ..( 13 skipped). .. *************************** 8 2020-05-06 11:22 46 *************************** 9 2020-05-06 11:23 ? - 10 2020-05-06 11:24 25 ****** 11 2020-05-06 11:25 27 ******** 12 2020-05-06 11:26 28 ********* 13 2020-05-06 11:27 29 ********** 14 2020-05-06 11:28 29 ********** 15 2020-05-06 11:29 30 *********** 16 2020-05-06 11:30 31 ************ 17 2020-05-06 11:31 ? - 18 2020-05-06 11:32 28 ********* 19 2020-05-06 11:33 28 ********* 20 2020-05-06 11:34 29 ********** 21 2020-05-06 11:35 31 ************ 22 2020-05-06 11:36 31 ************ 23 2020-05-06 11:37 32 ************* 24 2020-05-06 11:38 33 ************** 25 2020-05-06 11:39 33 ************** 26 2020-05-06 11:40 34 *************** 27 2020-05-06 11:41 34 *************** 28 2020-05-06 11:42 34 *************** 29 2020-05-06 11:43 35 **************** 30 2020-05-06 11:44 35 **************** 31 2020-05-06 11:45 35 **************** 32 2020-05-06 11:46 36 ***************** 33 2020-05-06 11:47 36 ***************** 34 2020-05-06 11:48 ? - 35 2020-05-06 11:49 27 ******** 36 2020-05-06 11:50 27 ******** 37 2020-05-06 11:51 28 ********* 38 2020-05-06 11:52 29 ********** 39 2020-05-06 11:53 29 ********** 40 2020-05-06 11:54 30 *********** 41 2020-05-06 11:55 31 ************ 42 2020-05-06 11:56 31 ************ 43 2020-05-06 11:57 32 ************* 44 2020-05-06 11:58 32 ************* 45 2020-05-06 11:59 33 ************** 46 2020-05-06 12:00 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/da0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/da0: Unknown USB bridge [0x090c:0x1000 (0x1100)] Please specify device type with the -d option. Use smartctl -h to get a usage summary