/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: V Series SATA SSD 1TB-1000GB Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: SN12605 User Capacity: 1,024,209,543,168 bytes [1.02 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 27 12:06:45 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct ------+ 100 100 010 - 0 9 Power_On_Hours ------+ 100 100 000 - 286 12 Power_Cycle_Count ------+ 100 100 000 - 20 164 Unknown_Attribute ------ 100 100 000 - 17180262405 165 Unknown_Attribute ------ 100 100 000 - 6 166 Unknown_Attribute ------ 100 100 000 - 4 167 Unknown_Attribute ------+ 100 100 000 - 5 194 Temperature_Celsius ------+ 031 031 000 - 31 (Min/Max 25/34) 199 UDMA_CRC_Error_Count ------+ 100 100 000 - 0 241 Total_LBAs_Written ------+ 100 100 000 - 162 242 Total_LBAs_Read ------+ 100 100 000 - 22 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: ?/33 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (71) Index Estimated Time Temperature Celsius 72 2023-04-27 04:09 ? - ... ..(407 skipped). .. - 2 2023-04-27 10:57 ? - 3 2023-04-27 10:58 30 *********** 4 2023-04-27 10:59 32 ************* 5 2023-04-27 11:00 33 ************** ... ..( 4 skipped). .. ************** 10 2023-04-27 11:05 33 ************** 11 2023-04-27 11:06 34 *************** 12 2023-04-27 11:07 33 ************** ... ..( 3 skipped). .. ************** 16 2023-04-27 11:11 33 ************** 17 2023-04-27 11:12 ? - ... ..( 9 skipped). .. - 27 2023-04-27 11:22 ? - 28 2023-04-27 11:23 28 ********* 29 2023-04-27 11:24 ? - 30 2023-04-27 11:25 28 ********* 31 2023-04-27 11:26 29 ********** 32 2023-04-27 11:27 29 ********** 33 2023-04-27 11:28 29 ********** 34 2023-04-27 11:29 ? - 35 2023-04-27 11:30 29 ********** ... ..( 2 skipped). .. ********** 38 2023-04-27 11:33 29 ********** 39 2023-04-27 11:34 ? - 40 2023-04-27 11:35 29 ********** 41 2023-04-27 11:36 ? - ... ..( 3 skipped). .. - 45 2023-04-27 11:40 ? - 46 2023-04-27 11:41 30 *********** 47 2023-04-27 11:42 ? - 48 2023-04-27 11:43 27 ******** 49 2023-04-27 11:44 28 ********* 50 2023-04-27 11:45 28 ********* 51 2023-04-27 11:46 ? - 52 2023-04-27 11:47 29 ********** 53 2023-04-27 11:48 29 ********** 54 2023-04-27 11:49 ? - 55 2023-04-27 11:50 28 ********* 56 2023-04-27 11:51 27 ******** 57 2023-04-27 11:52 27 ******** 58 2023-04-27 11:53 ? - 59 2023-04-27 11:54 27 ******** 60 2023-04-27 11:55 26 ******* 61 2023-04-27 11:56 27 ******** 62 2023-04-27 11:57 27 ******** 63 2023-04-27 11:58 27 ******** 64 2023-04-27 11:59 ? - 65 2023-04-27 12:00 ? - 66 2023-04-27 12:01 ? - 67 2023-04-27 12:02 32 ************* 68 2023-04-27 12:03 33 ************** 69 2023-04-27 12:04 32 ************* 70 2023-04-27 12:05 32 ************* 71 2023-04-27 12:06 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 20 --- Lifetime Power-On Resets 0x01 0x010 4 286 --- Power-on Hours 0x01 0x018 6 339776135 --- Logical Sectors Written 0x01 0x020 6 16160650 --- Number of Write Commands 0x01 0x028 6 48229917 --- Logical Sectors Read 0x01 0x030 6 1269550 --- Number of Read Commands 0x01 0x038 6 263020237156 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 22 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC