/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3T0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 21:18:31 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 168) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 123 100 033 - 2 4 Start_Stop_Count -O--CK 100 100 000 - 165 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 087 087 000 - 6052 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 138 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 086 000 - 970664378382 188 Command_Timeout -O--CK 100 100 000 - 790352035840 190 Airflow_Temperature_Cel -O---K 076 050 045 - 24 (Min/Max 20/25) 191 G-Sense_Error_Rate -O--CK 096 096 000 - 1130 192 Power-Off_Retract_Count -O--CK 100 100 000 - 3407924 193 Load_Cycle_Count -O--CK 093 093 000 - 70948 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 8 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 14 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 14 [1] occurred at disk power-on lifetime: 5700 hours (237 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 41 02 08 00 00 2d 80 90 00 0d 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 47 00 00 00 01 00 00 00 00 00 10 40 00 1d+02:52:21.455 READ LOG DMA EXT 61 02 c0 00 b0 00 00 2e 67 41 40 40 00 1d+02:52:14.978 WRITE FPDMA QUEUED 61 01 20 00 a8 00 00 2e 64 82 e0 40 00 1d+02:52:14.765 WRITE FPDMA QUEUED 61 00 20 00 a0 00 00 2e 63 74 60 40 00 1d+02:52:14.736 WRITE FPDMA QUEUED 61 00 20 00 98 00 00 2e 4b 53 80 40 00 1d+02:52:14.633 WRITE FPDMA QUEUED Error 13 [0] occurred at disk power-on lifetime: 5700 hours (237 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 41 00 d0 00 00 21 e3 b5 30 01 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 47 00 00 00 01 00 00 00 00 00 10 40 00 1d+02:52:10.701 READ LOG DMA EXT 61 04 00 00 f8 00 00 21 e3 d6 00 40 00 1d+02:52:05.904 WRITE FPDMA QUEUED 61 04 00 00 f0 00 00 21 e3 d2 00 40 00 1d+02:52:05.483 WRITE FPDMA QUEUED 61 04 00 00 e8 00 00 21 e3 ce 00 40 00 1d+02:52:05.129 WRITE FPDMA QUEUED 61 04 00 00 e0 00 00 21 e3 ca 00 40 00 1d+02:52:04.867 WRITE FPDMA QUEUED Error 12 [3] occurred at disk power-on lifetime: 5700 hours (237 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 00 c9 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 47 00 00 00 01 00 00 00 00 00 10 40 00 1d+02:52:01.885 READ LOG DMA EXT 61 04 00 00 c0 00 00 21 e3 66 00 40 00 1d+02:51:54.670 WRITE FPDMA QUEUED 61 04 00 00 b8 00 00 21 e3 62 00 40 00 1d+02:51:54.257 WRITE FPDMA QUEUED 61 04 00 00 b0 00 00 21 e3 5e 00 40 00 1d+02:51:54.171 WRITE FPDMA QUEUED 61 04 00 00 a8 00 00 21 e3 5a 00 40 00 1d+02:51:53.916 WRITE FPDMA QUEUED Error 11 [2] occurred at disk power-on lifetime: 5700 hours (237 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 41 03 98 00 00 47 62 34 68 07 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 47 00 00 00 01 00 00 00 00 00 10 40 00 1d+02:29:37.226 READ LOG DMA EXT 61 04 00 00 90 00 00 47 62 54 00 40 00 1d+02:29:28.924 WRITE FPDMA QUEUED 61 04 00 00 88 00 00 47 62 50 00 40 00 1d+02:29:28.924 WRITE FPDMA QUEUED 61 04 00 00 80 00 00 47 62 4c 00 40 00 1d+02:29:28.924 WRITE FPDMA QUEUED 61 04 00 00 78 00 00 47 62 48 00 40 00 1d+02:29:28.924 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 20/25 Celsius Lifetime Min/Max Temperature: 17/50 Celsius Specified Max Operating Temperature: 26 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (103) Index Estimated Time Temperature Celsius 104 2024-03-06 19:11 24 ***** 105 2024-03-06 19:12 23 **** 106 2024-03-06 19:13 24 ***** 107 2024-03-06 19:14 24 ***** 108 2024-03-06 19:15 23 **** 109 2024-03-06 19:16 24 ***** 110 2024-03-06 19:17 23 **** 111 2024-03-06 19:18 23 **** 112 2024-03-06 19:19 23 **** 113 2024-03-06 19:20 24 ***** 114 2024-03-06 19:21 23 **** 115 2024-03-06 19:22 23 **** 116 2024-03-06 19:23 23 **** 117 2024-03-06 19:24 24 ***** 118 2024-03-06 19:25 23 **** ... ..( 19 skipped). .. **** 10 2024-03-06 19:45 23 **** 11 2024-03-06 19:46 24 ***** ... ..( 15 skipped). .. ***** 27 2024-03-06 20:02 24 ***** 28 2024-03-06 20:03 23 **** 29 2024-03-06 20:04 24 ***** ... ..( 3 skipped). .. ***** 33 2024-03-06 20:08 24 ***** 34 2024-03-06 20:09 23 **** 35 2024-03-06 20:10 24 ***** 36 2024-03-06 20:11 24 ***** 37 2024-03-06 20:12 23 **** 38 2024-03-06 20:13 24 ***** 39 2024-03-06 20:14 24 ***** 40 2024-03-06 20:15 24 ***** 41 2024-03-06 20:16 23 **** ... ..( 9 skipped). .. **** 51 2024-03-06 20:26 23 **** 52 2024-03-06 20:27 24 ***** 53 2024-03-06 20:28 23 **** ... ..( 3 skipped). .. **** 57 2024-03-06 20:32 23 **** 58 2024-03-06 20:33 24 ***** 59 2024-03-06 20:34 24 ***** 60 2024-03-06 20:35 24 ***** 61 2024-03-06 20:36 23 **** 62 2024-03-06 20:37 24 ***** ... ..( 9 skipped). .. ***** 72 2024-03-06 20:47 24 ***** 73 2024-03-06 20:48 23 **** 74 2024-03-06 20:49 23 **** 75 2024-03-06 20:50 24 ***** ... ..( 6 skipped). .. ***** 82 2024-03-06 20:57 24 ***** 83 2024-03-06 20:58 25 ****** ... ..( 2 skipped). .. ****** 86 2024-03-06 21:01 25 ****** 87 2024-03-06 21:02 24 ***** 88 2024-03-06 21:03 25 ****** 89 2024-03-06 21:04 24 ***** ... ..( 13 skipped). .. ***** 103 2024-03-06 21:18 24 ***** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT01B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 21:18:32 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 092 092 000 - 39230 12 Power_Cycle_Count -O--CK 099 099 000 - 28 177 Wear_Leveling_Count PO--C- 095 095 000 - 73 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 076 052 000 - 24 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 10 241 Total_LBAs_Written -O--CK 099 099 000 - 17858428668 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 24/40 Celsius Lifetime Min/Max Temperature: 16/44 Celsius Specified Max Operating Temperature: 55 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (69) Index Estimated Time Temperature Celsius 70 2024-03-06 00:00 24 ***** ... ..( 3 skipped). .. ***** 74 2024-03-06 00:40 24 ***** 75 2024-03-06 00:50 25 ****** 76 2024-03-06 01:00 25 ****** 77 2024-03-06 01:10 24 ***** ... ..( 2 skipped). .. ***** 80 2024-03-06 01:40 24 ***** 81 2024-03-06 01:50 25 ****** 82 2024-03-06 02:00 24 ***** 83 2024-03-06 02:10 24 ***** 84 2024-03-06 02:20 24 ***** 85 2024-03-06 02:30 25 ****** 86 2024-03-06 02:40 24 ***** ... ..( 4 skipped). .. ***** 91 2024-03-06 03:30 24 ***** 92 2024-03-06 03:40 25 ****** 93 2024-03-06 03:50 24 ***** ... ..( 3 skipped). .. ***** 97 2024-03-06 04:30 24 ***** 98 2024-03-06 04:40 25 ****** 99 2024-03-06 04:50 24 ***** ... ..( 3 skipped). .. ***** 103 2024-03-06 05:30 24 ***** 104 2024-03-06 05:40 25 ****** 105 2024-03-06 05:50 25 ****** 106 2024-03-06 06:00 24 ***** ... ..( 2 skipped). .. ***** 109 2024-03-06 06:30 24 ***** 110 2024-03-06 06:40 25 ****** 111 2024-03-06 06:50 25 ****** 112 2024-03-06 07:00 24 ***** ... ..( 9 skipped). .. ***** 122 2024-03-06 08:40 24 ***** 123 2024-03-06 08:50 25 ****** 124 2024-03-06 09:00 25 ****** 125 2024-03-06 09:10 24 ***** ... ..( 2 skipped). .. ***** 0 2024-03-06 09:40 24 ***** 1 2024-03-06 09:50 25 ****** 2 2024-03-06 10:00 25 ****** 3 2024-03-06 10:10 24 ***** 4 2024-03-06 10:20 24 ***** 5 2024-03-06 10:30 24 ***** 6 2024-03-06 10:40 ? - 7 2024-03-06 10:50 24 ***** ... ..( 3 skipped). .. ***** 11 2024-03-06 11:30 24 ***** 12 2024-03-06 11:40 25 ****** 13 2024-03-06 11:50 25 ****** 14 2024-03-06 12:00 24 ***** 15 2024-03-06 12:10 24 ***** 16 2024-03-06 12:20 24 ***** 17 2024-03-06 12:30 25 ****** 18 2024-03-06 12:40 25 ****** 19 2024-03-06 12:50 25 ****** 20 2024-03-06 13:00 24 ***** 21 2024-03-06 13:10 24 ***** 22 2024-03-06 13:20 25 ****** 23 2024-03-06 13:30 24 ***** 24 2024-03-06 13:40 25 ****** 25 2024-03-06 13:50 25 ****** 26 2024-03-06 14:00 25 ****** 27 2024-03-06 14:10 24 ***** 28 2024-03-06 14:20 24 ***** 29 2024-03-06 14:30 24 ***** 30 2024-03-06 14:40 25 ****** ... ..( 3 skipped). .. ****** 34 2024-03-06 15:20 25 ****** 35 2024-03-06 15:30 24 ***** 36 2024-03-06 15:40 25 ****** 37 2024-03-06 15:50 25 ****** 38 2024-03-06 16:00 25 ****** 39 2024-03-06 16:10 24 ***** ... ..( 8 skipped). .. ***** 48 2024-03-06 17:40 24 ***** 49 2024-03-06 17:50 25 ****** 50 2024-03-06 18:00 24 ***** ... ..( 3 skipped). .. ***** 54 2024-03-06 18:40 24 ***** 55 2024-03-06 18:50 25 ****** 56 2024-03-06 19:00 25 ****** 57 2024-03-06 19:10 24 ***** ... ..( 2 skipped). .. ***** 60 2024-03-06 19:40 24 ***** 61 2024-03-06 19:50 25 ****** 62 2024-03-06 20:00 24 ***** ... ..( 4 skipped). .. ***** 67 2024-03-06 20:50 24 ***** 68 2024-03-06 21:00 25 ****** 69 2024-03-06 21:10 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 28 --- Lifetime Power-On Resets 0x01 0x010 4 39230 --- Power-on Hours 0x01 0x018 6 17858428668 --- Logical Sectors Written 0x01 0x020 6 794699356 --- Number of Write Commands 0x01 0x028 6 7347289727 --- Logical Sectors Read 0x01 0x030 6 92825778 --- Number of Read Commands 0x01 0x038 6 2309000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 24 --- Current Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 261 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 5 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC