/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1ER162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC45 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 24 05:36:31 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 80) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 169454224 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 092 092 020 - 8526 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 16 7 Seek_Error_Rate POSR-- 081 060 030 - 139942803 9 Power_On_Hours -O--CK 052 052 000 - 42733 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3099 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 096 096 000 - 4 188 Command_Timeout -O--CK 100 099 000 - 2 2 3 189 High_Fly_Writes -O-RCK 096 096 000 - 4 190 Airflow_Temperature_Cel -O---K 068 057 045 - 32 (Min/Max 19/32) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 422 193 Load_Cycle_Count -O--CK 022 022 000 - 157040 194 Temperature_Celsius -O---K 032 043 000 - 32 (0 15 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 229 240 Head_Flying_Hours ------ 100 253 000 - 33091h+31m+08.037s 241 Total_LBAs_Written ------ 100 253 000 - 39409675895 242 Total_LBAs_Read ------ 100 253 000 - 585020860158 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 28524 hours (1188 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 20 7e 3f d0 00 00 Error: UNC at LBA = 0x207e3fd0 = 545144784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 02 68 00 00 20 7e 4b 98 40 00 1d+14:22:03.282 READ FPDMA QUEUED 60 00 00 05 98 00 00 20 7e 3e 00 40 00 1d+14:22:03.282 READ FPDMA QUEUED 60 00 00 08 00 00 00 20 7e 36 00 40 00 1d+14:22:03.282 READ FPDMA QUEUED 60 00 00 02 70 00 00 20 7e 33 90 40 00 1d+14:22:03.263 READ FPDMA QUEUED 60 00 00 05 90 00 00 20 7e 26 00 40 00 1d+14:22:03.263 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 28524 hours (1188 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 20 7b 15 28 00 00 Error: UNC at LBA = 0x207b1528 = 544937256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 d0 00 00 20 7b 15 00 40 00 1d+14:17:31.104 READ DMA EXT 25 00 00 00 38 00 00 1c 91 5f 80 40 00 1d+14:17:31.055 READ DMA EXT 25 00 00 01 d0 00 00 20 7b 15 00 40 00 1d+14:17:26.215 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 1d+14:17:26.085 READ LOG EXT 60 00 00 00 38 00 00 1c 91 5f 80 40 00 1d+14:17:21.180 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 28524 hours (1188 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 20 7b 15 28 00 00 Error: UNC at LBA = 0x207b1528 = 544937256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 d0 00 00 20 7b 15 00 40 00 1d+14:17:26.215 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 1d+14:17:26.085 READ LOG EXT 60 00 00 00 38 00 00 1c 91 5f 80 40 00 1d+14:17:21.180 READ FPDMA QUEUED 60 00 00 01 d0 00 00 20 7b 15 00 40 00 1d+14:17:18.296 READ FPDMA QUEUED 60 00 00 06 30 00 00 20 7b 07 08 40 00 1d+14:17:18.296 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 28524 hours (1188 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 20 7b 15 28 00 00 Error: UNC at LBA = 0x207b1528 = 544937256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 38 00 00 1c 91 5f 80 40 00 1d+14:17:21.180 READ FPDMA QUEUED 60 00 00 01 d0 00 00 20 7b 15 00 40 00 1d+14:17:18.296 READ FPDMA QUEUED 60 00 00 06 30 00 00 20 7b 07 08 40 00 1d+14:17:18.296 READ FPDMA QUEUED 60 00 00 00 f0 00 00 20 7b 06 18 40 00 1d+14:17:18.296 READ FPDMA QUEUED 60 00 00 07 10 00 00 20 7a ef 00 40 00 1d+14:17:18.296 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 42117 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 19/32 Celsius Lifetime Min/Max Temperature: 15/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/ada1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWD240 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: KQ000A User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Zoned Device: Device managed zones Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 24 05:36:31 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 508) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 6221 4 Start_Stop_Count -O--CK 100 100 000 - 255 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 067 067 000 - 13400 10 Spin_Retry_Count PO--CK 105 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 254 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 92 193 Load_Cycle_Count -O--CK 097 097 000 - 39042 194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 15/38) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 081 081 000 - 7755 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 885 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 2 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 36864 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 18/28 Celsius Lifetime Min/Max Temperature: 15/38 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (184) Index Estimated Time Temperature Celsius 185 2022-04-23 21:39 26 ******* ... ..( 32 skipped). .. ******* 218 2022-04-23 22:12 26 ******* 219 2022-04-23 22:13 27 ******** ... ..( 14 skipped). .. ******** 234 2022-04-23 22:28 27 ******** 235 2022-04-23 22:29 28 ********* 236 2022-04-23 22:30 28 ********* 237 2022-04-23 22:31 29 ********** ... ..( 2 skipped). .. ********** 240 2022-04-23 22:34 29 ********** 241 2022-04-23 22:35 30 *********** 242 2022-04-23 22:36 30 *********** 243 2022-04-23 22:37 ? - 244 2022-04-23 22:38 19 - 245 2022-04-23 22:39 19 - 246 2022-04-23 22:40 19 - 247 2022-04-23 22:41 20 * 248 2022-04-23 22:42 20 * 249 2022-04-23 22:43 20 * 250 2022-04-23 22:44 21 ** ... ..( 2 skipped). .. ** 253 2022-04-23 22:47 21 ** 254 2022-04-23 22:48 22 *** 255 2022-04-23 22:49 22 *** 256 2022-04-23 22:50 22 *** 257 2022-04-23 22:51 23 **** 258 2022-04-23 22:52 23 **** 259 2022-04-23 22:53 23 **** 260 2022-04-23 22:54 24 ***** ... ..( 2 skipped). .. ***** 263 2022-04-23 22:57 24 ***** 264 2022-04-23 22:58 25 ****** ... ..( 37 skipped). .. ****** 302 2022-04-23 23:36 25 ****** 303 2022-04-23 23:37 24 ***** ... ..( 39 skipped). .. ***** 343 2022-04-24 00:17 24 ***** 344 2022-04-24 00:18 25 ****** 345 2022-04-24 00:19 24 ***** 346 2022-04-24 00:20 24 ***** 347 2022-04-24 00:21 25 ****** ... ..( 37 skipped). .. ****** 385 2022-04-24 00:59 25 ****** 386 2022-04-24 01:00 26 ******* 387 2022-04-24 01:01 25 ****** ... ..( 4 skipped). .. ****** 392 2022-04-24 01:06 25 ****** 393 2022-04-24 01:07 26 ******* 394 2022-04-24 01:08 25 ****** 395 2022-04-24 01:09 25 ****** 396 2022-04-24 01:10 26 ******* 397 2022-04-24 01:11 25 ****** 398 2022-04-24 01:12 26 ******* ... ..( 50 skipped). .. ******* 449 2022-04-24 02:03 26 ******* 450 2022-04-24 02:04 27 ******** ... ..( 4 skipped). .. ******** 455 2022-04-24 02:09 27 ******** 456 2022-04-24 02:10 28 ********* 457 2022-04-24 02:11 27 ******** ... ..( 12 skipped). .. ******** 470 2022-04-24 02:24 27 ******** 471 2022-04-24 02:25 26 ******* ... ..( 15 skipped). .. ******* 9 2022-04-24 02:41 26 ******* 10 2022-04-24 02:42 27 ******** 11 2022-04-24 02:43 26 ******* 12 2022-04-24 02:44 26 ******* 13 2022-04-24 02:45 27 ******** 14 2022-04-24 02:46 27 ******** 15 2022-04-24 02:47 27 ******** 16 2022-04-24 02:48 26 ******* 17 2022-04-24 02:49 26 ******* 18 2022-04-24 02:50 26 ******* 19 2022-04-24 02:51 27 ******** 20 2022-04-24 02:52 27 ******** 21 2022-04-24 02:53 27 ******** 22 2022-04-24 02:54 26 ******* ... ..( 12 skipped). .. ******* 35 2022-04-24 03:07 26 ******* 36 2022-04-24 03:08 27 ******** 37 2022-04-24 03:09 26 ******* ... ..( 29 skipped). .. ******* 67 2022-04-24 03:39 26 ******* 68 2022-04-24 03:40 27 ******** 69 2022-04-24 03:41 26 ******* 70 2022-04-24 03:42 26 ******* 71 2022-04-24 03:43 26 ******* 72 2022-04-24 03:44 27 ******** 73 2022-04-24 03:45 26 ******* 74 2022-04-24 03:46 26 ******* 75 2022-04-24 03:47 26 ******* 76 2022-04-24 03:48 27 ******** ... ..( 7 skipped). .. ******** 84 2022-04-24 03:56 27 ******** 85 2022-04-24 03:57 28 ********* 86 2022-04-24 03:58 27 ******** ... ..( 2 skipped). .. ******** 89 2022-04-24 04:01 27 ******** 90 2022-04-24 04:02 28 ********* ... ..( 62 skipped). .. ********* 153 2022-04-24 05:05 28 ********* 154 2022-04-24 05:06 27 ******** 155 2022-04-24 05:07 28 ********* 156 2022-04-24 05:08 28 ********* 157 2022-04-24 05:09 27 ******** 158 2022-04-24 05:10 28 ********* 159 2022-04-24 05:11 28 ********* 160 2022-04-24 05:12 27 ******** 161 2022-04-24 05:13 28 ********* 162 2022-04-24 05:14 28 ********* 163 2022-04-24 05:15 27 ******** 164 2022-04-24 05:16 28 ********* 165 2022-04-24 05:17 27 ******** 166 2022-04-24 05:18 28 ********* ... ..( 17 skipped). .. ********* 184 2022-04-24 05:36 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 254 --- Lifetime Power-On Resets 0x01 0x010 4 13400 --- Power-on Hours 0x01 0x018 6 9958901450 --- Logical Sectors Written 0x01 0x020 6 22552888 --- Number of Write Commands 0x01 0x028 6 40278536657 --- Logical Sectors Read 0x01 0x030 6 1001325562 --- Number of Read Commands 0x01 0x038 6 48240631659 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 13399 --- Spindle Motor Power-on Hours 0x03 0x010 4 7755 --- Head Flying Hours 0x03 0x018 4 39042 --- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 36 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 92 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 27 N-- Average Short Term Temperature 0x05 0x018 1 27 N-- Average Long Term Temperature 0x05 0x020 1 38 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 35 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 32 N-- Highest Average Long Term Temperature 0x05 0x048 1 27 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1563 --- Number of Hardware Resets 0x06 0x010 4 1005 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 7395 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Marvell based SanDisk SSDs Device Model: SanDisk SDSSDH2128G Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: X211200 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: Unknown (0x000a) TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 24 05:36:32 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 100 100 --- - 0 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 253 100 --- - 37738 12 Power_Cycle_Count -O--CK 100 100 --- - 3532 167 Min_Bad_Block/Die -O--CK 100 100 --- - 13 168 Maximum_Erase_Cycle -O--CK 100 100 --- - 1172 169 Total_Bad_Block -O--CK 100 100 --- - 99 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Avg_Write/Erase_Count -O--CK 100 100 --- - 1026 174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 709 184 End-to-End_Error -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 070 047 --- - 30 (Min/Max 18/47) 212 SATA_PHY_Error -O--CK 100 100 --- - 0 230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 8724 232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 8724 241 Total_Writes_GiB ----CK 253 253 --- - 95812055177 242 Total_Reads_GiB ----CK 253 253 --- - 167784934040 243 Unknown_Marvell_Attr -O--CK 100 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 34 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET /dev/nvme0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: ADATA SX8200PNP Serial Number: -- Firmware Version: S0118C PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x000000 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sun Apr 24 05:36:32 2022 EDT Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0016): Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 6000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 42 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 49% Data Units Read: 244,519,115 [125 TB] Data Units Written: 188,132,097 [96.3 TB] Host Read Commands: 2,917,746,131 Host Write Commands: 1,475,485,717 Controller Busy Time: 55,156 Power Cycles: 693 Power On Hours: 17,818 Unsafe Shutdowns: 214 Media and Data Integrity Errors: 1 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 23 Thermal Temp. 2 Transition Count: 13 Thermal Temp. 1 Total Time: 607 Thermal Temp. 2 Total Time: 135 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged