/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 14.0-CURRENT amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z7K500 Device Model: HGST HTS725050A7E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GS2OA340 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 23 18:45:08 2021 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 253 100 033 - 1 4 Start_Stop_Count -O--CK 100 100 000 - 1105 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 087 087 000 - 5923 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1104 183 Runtime_Bad_Block -O--CK 100 100 001 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 60129673216 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 056 045 - 33 (Min/Max 32/33) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 194 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2818091 193 Load_Cycle_Count -O--CK 100 100 000 - 3160 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 32/33 Celsius Lifetime Min/Max Temperature: 14/44 Celsius Specified Max Operating Temperature: 32 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (126) Index Estimated Time Temperature Celsius 127 2021-07-23 16:38 32 ************* 0 2021-07-23 16:39 32 ************* 1 2021-07-23 16:40 33 ************** 2 2021-07-23 16:41 33 ************** 3 2021-07-23 16:42 32 ************* 4 2021-07-23 16:43 32 ************* 5 2021-07-23 16:44 33 ************** 6 2021-07-23 16:45 32 ************* ... ..( 4 skipped). .. ************* 11 2021-07-23 16:50 32 ************* 12 2021-07-23 16:51 33 ************** 13 2021-07-23 16:52 32 ************* 14 2021-07-23 16:53 33 ************** ... ..( 16 skipped). .. ************** 31 2021-07-23 17:10 33 ************** 32 2021-07-23 17:11 32 ************* 33 2021-07-23 17:12 32 ************* 34 2021-07-23 17:13 33 ************** 35 2021-07-23 17:14 34 *************** ... ..( 4 skipped). .. *************** 40 2021-07-23 17:19 34 *************** 41 2021-07-23 17:20 ? - 42 2021-07-23 17:21 25 ****** 43 2021-07-23 17:22 26 ******* 44 2021-07-23 17:23 27 ******** 45 2021-07-23 17:24 29 ********** 46 2021-07-23 17:25 29 ********** 47 2021-07-23 17:26 30 *********** 48 2021-07-23 17:27 31 ************ 49 2021-07-23 17:28 31 ************ 50 2021-07-23 17:29 32 ************* ... ..( 2 skipped). .. ************* 53 2021-07-23 17:32 32 ************* 54 2021-07-23 17:33 33 ************** 55 2021-07-23 17:34 33 ************** 56 2021-07-23 17:35 34 *************** ... ..( 2 skipped). .. *************** 59 2021-07-23 17:38 34 *************** 60 2021-07-23 17:39 35 **************** ... ..( 2 skipped). .. **************** 63 2021-07-23 17:42 35 **************** 64 2021-07-23 17:43 36 ***************** ... ..( 14 skipped). .. ***************** 79 2021-07-23 17:58 36 ***************** 80 2021-07-23 17:59 35 **************** 81 2021-07-23 18:00 35 **************** 82 2021-07-23 18:01 34 *************** ... ..( 4 skipped). .. *************** 87 2021-07-23 18:06 34 *************** 88 2021-07-23 18:07 35 **************** ... ..( 3 skipped). .. **************** 92 2021-07-23 18:11 35 **************** 93 2021-07-23 18:12 ? - 94 2021-07-23 18:13 ? - 95 2021-07-23 18:14 28 ********* 96 2021-07-23 18:15 29 ********** 97 2021-07-23 18:16 30 *********** 98 2021-07-23 18:17 ? - 99 2021-07-23 18:18 30 *********** 100 2021-07-23 18:19 30 *********** 101 2021-07-23 18:20 31 ************ 102 2021-07-23 18:21 30 *********** 103 2021-07-23 18:22 31 ************ ... ..( 5 skipped). .. ************ 109 2021-07-23 18:28 31 ************ 110 2021-07-23 18:29 ? - 111 2021-07-23 18:30 32 ************* 112 2021-07-23 18:31 ? - 113 2021-07-23 18:32 32 ************* ... ..( 4 skipped). .. ************* 118 2021-07-23 18:37 32 ************* 119 2021-07-23 18:38 33 ************** ... ..( 6 skipped). .. ************** 126 2021-07-23 18:45 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/da0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 14.0-CURRENT amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG HM251JX Serial Number: -- LU WWN Device Id: 5 0f0000 ... Firmware Version: 2AF00_01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Fri Jul 23 18:45:09 2021 BST SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron] Wt Cache Reorder: Unknown (SCT Feature Control command failed) SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option)