Probe #1d2e9e175c of Gateway DX4840 Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Oct 31 23:40:18 2021 EDT ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21300) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 355) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 069 067 025 - 9625 4 Start_Stop_Count -O--CK 099 099 000 - 1397 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3526 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 122 181 Program_Fail_Cnt_Total -O---K 099 099 000 - 41236360 191 G-Sense_Error_Rate -O---K 100 100 000 - 5 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 056 000 - 36 (Min/Max 11/44) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 2 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 1423 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 11/63 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2021-10-31 13:05 36 ***************** 76 2021-10-31 13:10 40 ********************* ... ..( 9 skipped). .. ********************* 86 2021-10-31 14:00 40 ********************* 87 2021-10-31 14:05 20 * 88 2021-10-31 14:10 22 *** 89 2021-10-31 14:15 25 ****** 90 2021-10-31 14:20 26 ******* 91 2021-10-31 14:25 28 ********* 92 2021-10-31 14:30 30 *********** 93 2021-10-31 14:35 32 ************* 94 2021-10-31 14:40 32 ************* 95 2021-10-31 14:45 33 ************** 96 2021-10-31 14:50 34 *************** 97 2021-10-31 14:55 35 **************** 98 2021-10-31 15:00 36 ***************** 99 2021-10-31 15:05 36 ***************** 100 2021-10-31 15:10 37 ****************** 101 2021-10-31 15:15 37 ****************** 102 2021-10-31 15:20 38 ******************* 103 2021-10-31 15:25 37 ****************** 104 2021-10-31 15:30 38 ******************* 105 2021-10-31 15:35 39 ******************** ... ..( 2 skipped). .. ******************** 108 2021-10-31 15:50 39 ******************** 109 2021-10-31 15:55 40 ********************* 110 2021-10-31 16:00 22 *** 111 2021-10-31 16:05 25 ****** 112 2021-10-31 16:10 27 ******** 113 2021-10-31 16:15 29 ********** 114 2021-10-31 16:20 31 ************ 115 2021-10-31 16:25 25 ****** 116 2021-10-31 16:30 26 ******* 117 2021-10-31 16:35 27 ******** 118 2021-10-31 16:40 28 ********* 119 2021-10-31 16:45 30 *********** 120 2021-10-31 16:50 30 *********** 121 2021-10-31 16:55 31 ************ 122 2021-10-31 17:00 32 ************* 123 2021-10-31 17:05 33 ************** 124 2021-10-31 17:10 33 ************** 125 2021-10-31 17:15 33 ************** 126 2021-10-31 17:20 34 *************** 127 2021-10-31 17:25 34 *************** 0 2021-10-31 17:30 34 *************** 1 2021-10-31 17:35 35 **************** 2 2021-10-31 17:40 35 **************** 3 2021-10-31 17:45 35 **************** 4 2021-10-31 17:50 36 ***************** ... ..( 4 skipped). .. ***************** 9 2021-10-31 18:15 36 ***************** 10 2021-10-31 18:20 37 ****************** ... ..( 2 skipped). .. ****************** 13 2021-10-31 18:35 37 ****************** 14 2021-10-31 18:40 38 ******************* 15 2021-10-31 18:45 37 ****************** 16 2021-10-31 18:50 38 ******************* ... ..( 4 skipped). .. ******************* 21 2021-10-31 19:15 38 ******************* 22 2021-10-31 19:20 18 - 23 2021-10-31 19:25 21 ** 24 2021-10-31 19:30 23 **** 25 2021-10-31 19:35 26 ******* 26 2021-10-31 19:40 27 ******** 27 2021-10-31 19:45 30 *********** 28 2021-10-31 19:50 31 ************ 29 2021-10-31 19:55 32 ************* 30 2021-10-31 20:00 34 *************** 31 2021-10-31 20:05 35 **************** 32 2021-10-31 20:10 36 ***************** 33 2021-10-31 20:15 37 ****************** 34 2021-10-31 20:20 37 ****************** 35 2021-10-31 20:25 38 ******************* 36 2021-10-31 20:30 38 ******************* 37 2021-10-31 20:35 38 ******************* 38 2021-10-31 20:40 39 ******************** 39 2021-10-31 20:45 39 ******************** 40 2021-10-31 20:50 39 ******************** 41 2021-10-31 20:55 40 ********************* ... ..( 2 skipped). .. ********************* 44 2021-10-31 21:10 40 ********************* 45 2021-10-31 21:15 41 ********************** ... ..( 10 skipped). .. ********************** 56 2021-10-31 22:10 41 ********************** 57 2021-10-31 22:15 18 - 58 2021-10-31 22:20 20 * 59 2021-10-31 22:25 23 **** 60 2021-10-31 22:30 25 ****** 61 2021-10-31 22:35 27 ******** 62 2021-10-31 22:40 29 ********** 63 2021-10-31 22:45 30 *********** 64 2021-10-31 22:50 32 ************* 65 2021-10-31 22:55 33 ************** 66 2021-10-31 23:00 34 *************** 67 2021-10-31 23:05 35 **************** 68 2021-10-31 23:10 35 **************** 69 2021-10-31 23:15 36 ***************** 70 2021-10-31 23:20 36 ***************** 71 2021-10-31 23:25 37 ****************** 72 2021-10-31 23:30 37 ****************** 73 2021-10-31 23:35 38 ******************* 74 2021-10-31 23:40 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/ada1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Oct 31 23:40:19 2021 EDT ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20940) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 349) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 068 045 025 - 9803 4 Start_Stop_Count -O--CK 099 099 000 - 1558 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1131 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 270 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 316905 191 G-Sense_Error_Rate -O---K 100 100 000 - 11 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 062 053 000 - 38 (Min/Max 12/47) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 1582 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 37/38 Celsius Lifetime Min/Max Temperature: 11/56 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (21) Index Estimated Time Temperature Celsius 22 2021-10-31 13:05 38 ******************* 23 2021-10-31 13:10 42 *********************** ... ..( 9 skipped). .. *********************** 33 2021-10-31 14:00 42 *********************** 34 2021-10-31 14:05 20 * 35 2021-10-31 14:10 23 **** 36 2021-10-31 14:15 25 ****** 37 2021-10-31 14:20 26 ******* 38 2021-10-31 14:25 28 ********* 39 2021-10-31 14:30 30 *********** 40 2021-10-31 14:35 31 ************ 41 2021-10-31 14:40 32 ************* 42 2021-10-31 14:45 34 *************** 43 2021-10-31 14:50 34 *************** 44 2021-10-31 14:55 35 **************** 45 2021-10-31 15:00 36 ***************** 46 2021-10-31 15:05 37 ****************** 47 2021-10-31 15:10 38 ******************* 48 2021-10-31 15:15 38 ******************* 49 2021-10-31 15:20 39 ******************** 50 2021-10-31 15:25 39 ******************** 51 2021-10-31 15:30 40 ********************* 52 2021-10-31 15:35 40 ********************* 53 2021-10-31 15:40 40 ********************* 54 2021-10-31 15:45 41 ********************** 55 2021-10-31 15:50 41 ********************** 56 2021-10-31 15:55 41 ********************** 57 2021-10-31 16:00 23 **** 58 2021-10-31 16:05 25 ****** 59 2021-10-31 16:10 27 ******** 60 2021-10-31 16:15 29 ********** 61 2021-10-31 16:20 30 *********** 62 2021-10-31 16:25 25 ****** 63 2021-10-31 16:30 26 ******* 64 2021-10-31 16:35 27 ******** 65 2021-10-31 16:40 29 ********** 66 2021-10-31 16:45 30 *********** 67 2021-10-31 16:50 31 ************ 68 2021-10-31 16:55 32 ************* 69 2021-10-31 17:00 33 ************** 70 2021-10-31 17:05 33 ************** 71 2021-10-31 17:10 35 **************** ... ..( 2 skipped). .. **************** 74 2021-10-31 17:25 35 **************** 75 2021-10-31 17:30 36 ***************** 76 2021-10-31 17:35 36 ***************** 77 2021-10-31 17:40 36 ***************** 78 2021-10-31 17:45 38 ******************* 79 2021-10-31 17:50 37 ****************** 80 2021-10-31 17:55 37 ****************** 81 2021-10-31 18:00 38 ******************* ... ..( 3 skipped). .. ******************* 85 2021-10-31 18:20 38 ******************* 86 2021-10-31 18:25 39 ******************** ... ..( 3 skipped). .. ******************** 90 2021-10-31 18:45 39 ******************** 91 2021-10-31 18:50 40 ********************* ... ..( 4 skipped). .. ********************* 96 2021-10-31 19:15 40 ********************* 97 2021-10-31 19:20 19 - 98 2021-10-31 19:25 21 ** 99 2021-10-31 19:30 23 **** 100 2021-10-31 19:35 25 ****** 101 2021-10-31 19:40 27 ******** 102 2021-10-31 19:45 29 ********** 103 2021-10-31 19:50 31 ************ 104 2021-10-31 19:55 32 ************* 105 2021-10-31 20:00 34 *************** 106 2021-10-31 20:05 35 **************** 107 2021-10-31 20:10 36 ***************** 108 2021-10-31 20:15 37 ****************** 109 2021-10-31 20:20 38 ******************* 110 2021-10-31 20:25 38 ******************* 111 2021-10-31 20:30 39 ******************** 112 2021-10-31 20:35 40 ********************* 113 2021-10-31 20:40 40 ********************* 114 2021-10-31 20:45 40 ********************* 115 2021-10-31 20:50 41 ********************** ... ..( 2 skipped). .. ********************** 118 2021-10-31 21:05 41 ********************** 119 2021-10-31 21:10 42 *********************** 120 2021-10-31 21:15 42 *********************** 121 2021-10-31 21:20 43 ************************ ... ..( 9 skipped). .. ************************ 3 2021-10-31 22:10 43 ************************ 4 2021-10-31 22:15 18 - 5 2021-10-31 22:20 20 * 6 2021-10-31 22:25 22 *** 7 2021-10-31 22:30 24 ***** 8 2021-10-31 22:35 26 ******* 9 2021-10-31 22:40 28 ********* 10 2021-10-31 22:45 30 *********** 11 2021-10-31 22:50 31 ************ 12 2021-10-31 22:55 33 ************** 13 2021-10-31 23:00 34 *************** 14 2021-10-31 23:05 35 **************** 15 2021-10-31 23:10 36 ***************** 16 2021-10-31 23:15 36 ***************** 17 2021-10-31 23:20 37 ****************** 18 2021-10-31 23:25 38 ******************* 19 2021-10-31 23:30 38 ******************* 20 2021-10-31 23:35 39 ******************** 21 2021-10-31 23:40 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific


Hardware for Linux and BSD

GitHub