/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 i386] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD1600BEVT-22ZCT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 11.01A11 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sat Jan 28 14:54:36 2023 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 66) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 159 157 021 - 1050 4 Start_Stop_Count -O--CK 096 096 000 - 4495 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 16001 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4184 192 Power-Off_Retract_Count -O--CK 200 200 000 - 215 193 Load_Cycle_Count -O--CK 001 001 000 - 826893 194 Temperature_Celsius -O---K 098 079 000 - 45 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 44/45 Celsius Lifetime Min/Max Temperature: 13/64 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (83) Index Estimated Time Temperature Celsius 84 2023-01-28 12:47 42 *********************** ... ..( 5 skipped). .. *********************** 90 2023-01-28 12:53 42 *********************** 91 2023-01-28 12:54 ? - 92 2023-01-28 12:55 42 *********************** ... ..( 3 skipped). .. *********************** 96 2023-01-28 12:59 42 *********************** 97 2023-01-28 13:00 43 ************************ 98 2023-01-28 13:01 42 *********************** 99 2023-01-28 13:02 43 ************************ ... ..( 2 skipped). .. ************************ 102 2023-01-28 13:05 43 ************************ 103 2023-01-28 13:06 42 *********************** 104 2023-01-28 13:07 43 ************************ 105 2023-01-28 13:08 42 *********************** 106 2023-01-28 13:09 43 ************************ 107 2023-01-28 13:10 42 *********************** ... ..( 4 skipped). .. *********************** 112 2023-01-28 13:15 42 *********************** 113 2023-01-28 13:16 43 ************************ 114 2023-01-28 13:17 43 ************************ 115 2023-01-28 13:18 44 ************************* 116 2023-01-28 13:19 44 ************************* 117 2023-01-28 13:20 43 ************************ 118 2023-01-28 13:21 44 ************************* 119 2023-01-28 13:22 44 ************************* 120 2023-01-28 13:23 43 ************************ 121 2023-01-28 13:24 43 ************************ 122 2023-01-28 13:25 44 ************************* 123 2023-01-28 13:26 45 ************************** 124 2023-01-28 13:27 44 ************************* ... ..( 3 skipped). .. ************************* 0 2023-01-28 13:31 44 ************************* 1 2023-01-28 13:32 43 ************************ 2 2023-01-28 13:33 43 ************************ 3 2023-01-28 13:34 44 ************************* 4 2023-01-28 13:35 43 ************************ 5 2023-01-28 13:36 44 ************************* 6 2023-01-28 13:37 44 ************************* 7 2023-01-28 13:38 44 ************************* 8 2023-01-28 13:39 45 ************************** 9 2023-01-28 13:40 45 ************************** 10 2023-01-28 13:41 45 ************************** 11 2023-01-28 13:42 44 ************************* 12 2023-01-28 13:43 45 ************************** 13 2023-01-28 13:44 44 ************************* ... ..( 10 skipped). .. ************************* 24 2023-01-28 13:55 44 ************************* 25 2023-01-28 13:56 43 ************************ 26 2023-01-28 13:57 43 ************************ 27 2023-01-28 13:58 44 ************************* ... ..( 2 skipped). .. ************************* 30 2023-01-28 14:01 44 ************************* 31 2023-01-28 14:02 43 ************************ 32 2023-01-28 14:03 44 ************************* ... ..( 14 skipped). .. ************************* 47 2023-01-28 14:18 44 ************************* 48 2023-01-28 14:19 45 ************************** 49 2023-01-28 14:20 44 ************************* 50 2023-01-28 14:21 44 ************************* 51 2023-01-28 14:22 45 ************************** ... ..( 5 skipped). .. ************************** 57 2023-01-28 14:28 45 ************************** 58 2023-01-28 14:29 ? - 59 2023-01-28 14:30 44 ************************* 60 2023-01-28 14:31 45 ************************** ... ..( 22 skipped). .. ************************** 83 2023-01-28 14:54 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1515 Vendor specific