/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3320620AS Serial Number: -- Firmware Version: 3.AAK User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Feb 8 01:14:48 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 0 3 Spin_Up_Time PO---- 096 096 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 32 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 085 060 030 - 379578477 9 Power_On_Hours -O--CK 077 077 000 - 20215 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 32 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 061 050 045 - 39 (Min/Max 38/39) 194 Temperature_Celsius -O---K 039 050 000 - 39 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 080 057 000 - 202991605 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3320620AS Serial Number: -- Firmware Version: 3.AAK User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Feb 8 01:14:48 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 084 006 - 86902465 3 Spin_Up_Time PO---- 096 095 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 36 5 Reallocated_Sector_Ct PO--CK 097 097 036 - 126 7 Seek_Error_Rate POSR-- 081 060 030 - 144699928 9 Power_On_Hours -O--CK 092 092 000 - 7424 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 36 187 Reported_Uncorrect -O--CK 001 001 000 - 301 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 058 057 045 - 42 (Min/Max 41/42) 194 Temperature_Celsius -O---K 042 043 000 - 42 (0 19 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 076 052 000 - 187462153 197 Current_Pending_Sector -O--C- 001 001 000 - 8765 198 Offline_Uncorrectable ----C- 001 001 000 - 8765 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 301 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 301 [0] occurred at disk power-on lifetime: 7408 hours (308 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1d 95 54 28 54 e0 00 Error: UNC at LBA = 0x1d95542854 = 127059372116 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 1d 95 00 28 4e e0 00 07:08:56.507 READ DMA EXT 25 00 00 00 08 00 1d 95 00 28 4e e0 00 07:08:53.783 READ DMA EXT e7 00 00 01 00 00 00 00 00 00 00 e0 00 07:08:53.769 FLUSH CACHE 35 00 00 00 08 00 04 78 00 48 16 e0 00 07:08:53.769 WRITE DMA EXT e7 00 00 01 00 00 00 00 00 00 00 e0 00 07:08:53.727 FLUSH CACHE Error 300 [19] occurred at disk power-on lifetime: 7391 hours (307 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 83 90 37 90 e0 00 Error: UNC at LBA = 0x1c83903790 = 122466350992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 00 30 00 1c 7f 00 37 56 e0 00 08:36:47.014 READ DMA EXT 25 00 00 01 00 00 1c 7e 00 37 56 e0 00 08:36:44.397 READ DMA EXT 25 00 00 00 08 00 1c 76 00 37 66 e0 00 08:36:44.396 READ DMA EXT Error 299 [18] occurred at disk power-on lifetime: 7391 hours (307 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 83 90 37 90 e0 00 Error: UNC at LBA = 0x1c83903790 = 122466350992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 00 30 00 1c 7f 00 37 56 e0 00 08:36:42.665 READ DMA EXT 25 00 00 01 00 00 1c 7e 00 37 56 e0 00 08:36:42.659 READ DMA EXT 25 00 00 00 08 00 1c 76 00 37 66 e0 00 08:36:44.397 READ DMA EXT 25 00 00 00 e0 00 1c 78 00 37 b6 e0 00 08:36:44.396 READ DMA EXT Error 298 [17] occurred at disk power-on lifetime: 7370 hours (307 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1d 95 d5 1c d5 e0 00 Error: UNC at LBA = 0x1d95d51cd5 = 127067823317 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1d 95 00 1c c6 e0 00 04:57:17.676 READ DMA EXT 25 00 00 01 00 00 1d 95 00 1c c6 e0 00 04:57:11.580 READ DMA EXT 25 00 00 00 98 00 1d 95 00 1c 2e e0 00 04:57:10.126 READ DMA EXT 25 00 00 00 80 00 17 a7 00 2a 6e e0 00 04:57:09.308 READ DMA EXT 25 00 00 00 68 00 17 a7 00 2a 06 e0 00 04:57:09.300 READ DMA EXT Error 297 [16] occurred at disk power-on lifetime: 7408 hours (308 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1d 95 54 28 54 e0 00 Error: UNC at LBA = 0x1d95542854 = 127059372116 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 1d 95 00 28 4e e0 00 07:08:56.507 READ DMA EXT 25 00 00 00 08 00 1d 95 00 28 4e e0 00 07:08:53.783 READ DMA EXT e7 00 00 01 00 00 00 00 00 00 00 e0 00 07:08:53.769 FLUSH CACHE 35 00 00 00 08 00 04 78 00 48 16 e0 00 07:08:53.769 WRITE DMA EXT e7 00 00 01 00 00 00 00 00 00 00 e0 00 07:08:53.727 FLUSH CACHE Error 296 [15] occurred at disk power-on lifetime: 7391 hours (307 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 83 90 37 90 e0 00 Error: UNC at LBA = 0x1c83903790 = 122466350992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 00 30 00 1c 7f 00 37 56 e0 00 08:36:47.014 READ DMA EXT 25 00 00 01 00 00 1c 7e 00 37 56 e0 00 08:36:44.397 READ DMA EXT 25 00 00 00 08 00 1c 76 00 37 66 e0 00 08:36:44.396 READ DMA EXT Error 295 [14] occurred at disk power-on lifetime: 7391 hours (307 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 83 90 37 90 e0 00 Error: UNC at LBA = 0x1c83903790 = 122466350992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1c 83 00 37 16 e0 00 08:36:42.665 READ DMA EXT 25 00 00 00 30 00 1c 7f 00 37 56 e0 00 08:36:42.665 READ DMA EXT 25 00 00 01 00 00 1c 7e 00 37 56 e0 00 08:36:42.659 READ DMA EXT 25 00 00 00 08 00 1c 76 00 37 66 e0 00 08:36:44.397 READ DMA EXT 25 00 00 00 e0 00 1c 78 00 37 b6 e0 00 08:36:44.396 READ DMA EXT Error 294 [13] occurred at disk power-on lifetime: 7370 hours (307 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1d 95 d5 1c d5 e0 00 Error: UNC at LBA = 0x1d95d51cd5 = 127067823317 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 1d 95 00 1c c6 e0 00 04:57:17.676 READ DMA EXT 25 00 00 01 00 00 1d 95 00 1c c6 e0 00 04:57:11.580 READ DMA EXT 25 00 00 00 98 00 1d 95 00 1c 2e e0 00 04:57:10.126 READ DMA EXT 25 00 00 00 80 00 17 a7 00 2a 6e e0 00 04:57:09.308 READ DMA EXT 25 00 00 00 68 00 17 a7 00 2a 06 e0 00 04:57:09.300 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS