/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p7 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven OEM SSDs Device Model: SPCC Solid State Disk Serial Number: -- Firmware Version: SBFM61.3 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Mar 16 21:54:59 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 7714 12 Power_Cycle_Count -O--C- 100 100 000 - 1808 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 000 - 0/59 173 MaxAvgErase_Ct -O--C- 100 100 000 - 115 (Average 82) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 43 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 CRC_Error_Count PO-R-- 100 100 050 - 2124 231 SSD_Life_Left PO--C- 100 100 000 - 97 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6221 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 2115 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2115 [66] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 00 03 00 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x00000300 = 768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 00 03 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 02 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 02 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 01 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 01 00 e0 00 00:00:00.000 READ DMA EXT Error 2114 [65] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 00 01 00 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x00000100 = 256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 00 01 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 00 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 00 00 00 e0 00 00:00:00.000 READ DMA EXT e1 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDLE IMMEDIATE 25 00 00 00 80 00 00 00 00 00 00 e0 00 00:00:00.000 READ DMA EXT Error 2113 [64] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 00 00 00 e0 00 00:00:00.000 READ DMA EXT e1 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDLE IMMEDIATE b0 00 d5 00 01 00 00 00 c2 4f 06 a0 00 00:00:00.000 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 a0 00 00:00:00.000 SMART READ LOG b0 00 d0 00 01 00 00 00 c2 4f 00 a0 00 00:00:00.000 SMART READ DATA Error 2112 [63] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 00 29 d5 80 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x0029d580 = 2741632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 29 d5 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 29 d5 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 29 d4 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 29 d4 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 80 00 00 00 29 d3 80 e0 00 00:00:00.000 READ DMA EXT Error 2111 [62] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 f0 00 00 07 44 08 10 e0 00 Error: ICRC, ABRT 240 sectors at LBA = 0x07440810 = 121899024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 07 44 08 10 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 07 44 08 08 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 07 44 08 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 00 00 29 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 00 2a 78 e0 00 00:00:00.000 READ DMA EXT Error 2110 [61] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 f0 00 00 00 00 29 88 e0 00 Error: ICRC, ABRT 240 sectors at LBA = 0x00002988 = 10632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f0 00 00 00 00 29 88 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 70 00 00 00 00 08 10 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 08 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 02 00 00 00 00 08 02 e0 00 00:00:00.000 READ DMA EXT Error 2109 [60] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 18 00 00 0e 80 08 18 e0 00 Error: ICRC, ABRT 24 sectors at LBA = 0x0e800818 = 243271704 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 18 00 00 0e 80 08 18 e0 00 00:00:00.000 WRITE DMA EXT 35 00 00 00 10 00 00 0e 40 08 70 e0 00 00:00:00.000 WRITE DMA EXT 35 00 00 00 08 00 00 0e 40 08 60 e0 00 00:00:00.000 WRITE DMA EXT 35 00 00 00 10 00 00 0e 40 08 48 e0 00 00:00:00.000 WRITE DMA EXT 35 00 00 00 30 00 00 0e 40 08 08 e0 00 00:00:00.000 WRITE DMA EXT Error 2108 [59] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 50 00 00 0e 00 08 28 e0 00 Error: ICRC, ABRT 80 sectors at LBA = 0x0e000828 = 234883112 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 50 00 00 0e 00 08 28 e0 00 00:00:00.000 WRITE DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:00:00.000 SET FEATURES [Set transfer mode] ff 00 d5 00 01 00 00 00 00 00 01 00 04 00:00:00.000 [VENDOR SPECIFIC] 35 00 00 00 50 00 00 0e 00 08 28 e0 00 00:00:00.000 WRITE DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:00:00.000 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6890 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1808 --- Lifetime Power-On Resets 0x01 0x010 4 7714 --- Power-on Hours 0x01 0x018 6 13047961747 --- Logical Sectors Written 0x01 0x028 6 12964593689 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4355 --- Number of Hardware Resets 0x06 0x018 4 2124 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p7 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVT-22A23T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Mar 16 21:54:59 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 79) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 143 129 021 - 1850 4 Start_Stop_Count -O--CK 001 001 000 - 136826 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 078 078 000 - 16525 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5104 191 G-Sense_Error_Rate -O--CK 001 001 000 - 2394 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1320 193 Load_Cycle_Count -O--CK 001 001 000 - 2356313 194 Temperature_Celsius -O---K 112 091 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 15892 - # 2 Extended offline Completed without error 00% 14528 - # 3 Extended offline Completed without error 00% 14316 - # 4 Short offline Completed without error 00% 14315 - # 5 Extended offline Completed without error 00% 13042 - # 6 Extended offline Aborted by host 20% 13006 - # 7 Extended offline Completed without error 00% 12755 - # 8 Short offline Completed without error 00% 12754 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Stand-by (1) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 28/31 Celsius Lifetime Min/Max Temperature: 28/52 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (21) Index Estimated Time Temperature Celsius 22 2022-03-16 19:47 ? - 23 2022-03-16 19:48 37 ****************** 24 2022-03-16 19:49 37 ****************** 25 2022-03-16 19:50 ? - 26 2022-03-16 19:51 37 ****************** 27 2022-03-16 19:52 ? - 28 2022-03-16 19:53 37 ****************** 29 2022-03-16 19:54 37 ****************** 30 2022-03-16 19:55 ? - 31 2022-03-16 19:56 37 ****************** 32 2022-03-16 19:57 ? - 33 2022-03-16 19:58 37 ****************** 34 2022-03-16 19:59 37 ****************** 35 2022-03-16 20:00 ? - 36 2022-03-16 20:01 37 ****************** 37 2022-03-16 20:02 ? - 38 2022-03-16 20:03 37 ****************** 39 2022-03-16 20:04 37 ****************** 40 2022-03-16 20:05 ? - 41 2022-03-16 20:06 37 ****************** 42 2022-03-16 20:07 ? - 43 2022-03-16 20:08 37 ****************** 44 2022-03-16 20:09 37 ****************** 45 2022-03-16 20:10 ? - 46 2022-03-16 20:11 37 ****************** 47 2022-03-16 20:12 ? - 48 2022-03-16 20:13 37 ****************** 49 2022-03-16 20:14 37 ****************** 50 2022-03-16 20:15 ? - 51 2022-03-16 20:16 37 ****************** 52 2022-03-16 20:17 ? - 53 2022-03-16 20:18 37 ****************** 54 2022-03-16 20:19 37 ****************** 55 2022-03-16 20:20 ? - 56 2022-03-16 20:21 37 ****************** 57 2022-03-16 20:22 ? - 58 2022-03-16 20:23 37 ****************** 59 2022-03-16 20:24 37 ****************** 60 2022-03-16 20:25 ? - 61 2022-03-16 20:26 37 ****************** 62 2022-03-16 20:27 ? - 63 2022-03-16 20:28 37 ****************** 64 2022-03-16 20:29 37 ****************** 65 2022-03-16 20:30 ? - 66 2022-03-16 20:31 37 ****************** 67 2022-03-16 20:32 ? - 68 2022-03-16 20:33 37 ****************** 69 2022-03-16 20:34 37 ****************** 70 2022-03-16 20:35 ? - 71 2022-03-16 20:36 37 ****************** 72 2022-03-16 20:37 ? - 73 2022-03-16 20:38 37 ****************** 74 2022-03-16 20:39 37 ****************** 75 2022-03-16 20:40 ? - 76 2022-03-16 20:41 37 ****************** 77 2022-03-16 20:42 ? - 78 2022-03-16 20:43 37 ****************** 79 2022-03-16 20:44 37 ****************** 80 2022-03-16 20:45 ? - 81 2022-03-16 20:46 37 ****************** 82 2022-03-16 20:47 37 ****************** 83 2022-03-16 20:48 ? - 84 2022-03-16 20:49 37 ****************** 85 2022-03-16 20:50 ? - 86 2022-03-16 20:51 37 ****************** 87 2022-03-16 20:52 37 ****************** 88 2022-03-16 20:53 ? - 89 2022-03-16 20:54 37 ****************** 90 2022-03-16 20:55 ? - 91 2022-03-16 20:56 37 ****************** 92 2022-03-16 20:57 37 ****************** 93 2022-03-16 20:58 ? - 94 2022-03-16 20:59 37 ****************** 95 2022-03-16 21:00 ? - 96 2022-03-16 21:01 37 ****************** 97 2022-03-16 21:02 36 ***************** 98 2022-03-16 21:03 ? - 99 2022-03-16 21:04 37 ****************** 100 2022-03-16 21:05 ? - 101 2022-03-16 21:06 37 ****************** 102 2022-03-16 21:07 37 ****************** 103 2022-03-16 21:08 ? - 104 2022-03-16 21:09 37 ****************** 105 2022-03-16 21:10 ? - 106 2022-03-16 21:11 37 ****************** 107 2022-03-16 21:12 36 ***************** 108 2022-03-16 21:13 ? - 109 2022-03-16 21:14 37 ****************** 110 2022-03-16 21:15 ? - 111 2022-03-16 21:16 37 ****************** 112 2022-03-16 21:17 37 ****************** 113 2022-03-16 21:18 ? - 114 2022-03-16 21:19 37 ****************** 115 2022-03-16 21:20 ? - 116 2022-03-16 21:21 37 ****************** 117 2022-03-16 21:22 36 ***************** 118 2022-03-16 21:23 ? - 119 2022-03-16 21:24 37 ****************** 120 2022-03-16 21:25 ? - 121 2022-03-16 21:26 37 ****************** 122 2022-03-16 21:27 36 ***************** 123 2022-03-16 21:28 ? - 124 2022-03-16 21:29 37 ****************** 125 2022-03-16 21:30 ? - 126 2022-03-16 21:31 28 ********* 127 2022-03-16 21:32 28 ********* 0 2022-03-16 21:33 29 ********** 1 2022-03-16 21:34 ? - 2 2022-03-16 21:35 28 ********* 3 2022-03-16 21:36 28 ********* 4 2022-03-16 21:37 29 ********** 5 2022-03-16 21:38 ? - 6 2022-03-16 21:39 29 ********** ... ..( 4 skipped). .. ********** 11 2022-03-16 21:44 29 ********** 12 2022-03-16 21:45 30 *********** ... ..( 4 skipped). .. *********** 17 2022-03-16 21:50 30 *********** 18 2022-03-16 21:51 31 ************ ... ..( 2 skipped). .. ************ 21 2022-03-16 21:54 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1177 Vendor specific