/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-60WN4A1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 03.01A03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 8 15:03:07 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11220) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 116) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 168 021 - 2166 4 Start_Stop_Count -O--CK 093 093 000 - 7024 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 080 080 000 - 15063 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2181 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 076 000 - 27 188 Command_Timeout -O--CK 100 056 000 - 193276477485 190 Airflow_Temperature_Cel -O---K 067 053 040 - 33 (Min/Max 23/34) 192 Power-Off_Retract_Count -O--CK 200 200 000 - 375 193 Load_Cycle_Count -O--CK 192 192 000 - 24771 194 Temperature_Celsius -O---K 110 096 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0d GPL,SL R/O 8 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1181 Device vendor specific log 0xb6 SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 67 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 67 [18] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:25.204 FLUSH CACHE EXT 61 00 10 00 90 00 00 00 5d 1f a0 40 00 00:32:25.204 WRITE FPDMA QUEUED 61 00 08 00 88 00 00 00 5d 1f 18 40 00 00:32:25.203 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:16.719 FLUSH CACHE EXT 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:16.719 READ LOG EXT Error 66 [17] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:16.719 FLUSH CACHE EXT 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:16.719 READ LOG EXT 61 00 08 00 78 00 00 00 5d 1f 20 40 00 00:32:08.236 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:07.239 READ LOG EXT 61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED Error 65 [16] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 78 00 00 00 5d 1f 20 40 00 00:32:08.236 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:07.239 READ LOG EXT 61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:57.751 READ LOG EXT 61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED Error 64 [15] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:57.751 READ LOG EXT 61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:48.269 READ LOG EXT 61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED Error 63 [14] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:48.269 READ LOG EXT 61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:38.789 READ LOG EXT 61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED Error 62 [13] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:38.789 READ LOG EXT 61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED 61 00 08 00 50 00 00 00 63 bc 48 40 00 00:31:28.954 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 00 60 08 50 40 00 00:31:21.742 WRITE FPDMA QUEUED Error 61 [12] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED 61 00 08 00 50 00 00 00 63 bc 48 40 00 00:31:28.954 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 00 60 08 50 40 00 00:31:21.742 WRITE FPDMA QUEUED 61 00 08 00 40 00 00 00 5d 1f 10 40 00 00:31:21.213 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:31:12.729 FLUSH CACHE EXT Error 60 [11] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:31:12.729 FLUSH CACHE EXT 61 00 08 00 30 00 00 00 5d 1f a0 40 00 00:31:12.729 WRITE FPDMA QUEUED 61 00 28 00 28 00 00 00 5d 22 58 40 00 00:31:12.729 WRITE FPDMA QUEUED 61 00 08 00 20 00 00 00 00 09 20 40 00 00:31:09.480 WRITE FPDMA QUEUED 61 00 08 00 18 00 00 1a 46 49 e8 40 00 00:31:09.480 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13988 - # 2 Short offline Completed without error 00% 12863 - # 3 Short offline Completed without error 00% 12861 - # 4 Short offline Completed without error 00% 11430 - # 5 Short offline Completed without error 00% 11414 - # 6 Short offline Completed without error 00% 11400 - # 7 Short offline Completed without error 00% 8687 - # 8 Short offline Completed without error 00% 8671 - # 9 Short offline Completed without error 00% 8647 - #10 Short offline Completed without error 00% 8629 - #11 Short offline Completed without error 00% 8613 - #12 Short offline Completed without error 00% 8601 - #13 Short offline Completed without error 00% 8585 - #14 Short offline Completed without error 00% 8583 - #15 Short offline Completed without error 00% 8566 - #16 Short offline Completed without error 00% 8553 - #17 Short offline Completed without error 00% 8546 - #18 Short offline Completed without error 00% 8526 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 23/34 Celsius Lifetime Min/Max Temperature: 22/47 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2022-11-08 12:56 32 ************* ... ..( 25 skipped). .. ************* 42 2022-11-08 13:22 32 ************* 43 2022-11-08 13:23 33 ************** ... ..( 4 skipped). .. ************** 48 2022-11-08 13:28 33 ************** 49 2022-11-08 13:29 34 *************** 50 2022-11-08 13:30 34 *************** 51 2022-11-08 13:31 34 *************** 52 2022-11-08 13:32 33 ************** ... ..( 14 skipped). .. ************** 67 2022-11-08 13:47 33 ************** 68 2022-11-08 13:48 34 *************** ... ..( 7 skipped). .. *************** 76 2022-11-08 13:56 34 *************** 77 2022-11-08 13:57 33 ************** ... ..( 45 skipped). .. ************** 123 2022-11-08 14:43 33 ************** 124 2022-11-08 14:44 34 *************** ... ..( 13 skipped). .. *************** 10 2022-11-08 14:58 34 *************** 11 2022-11-08 14:59 33 ************** ... ..( 3 skipped). .. ************** 15 2022-11-08 15:03 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2181 --- Lifetime Power-On Resets 0x01 0x010 4 15063 --- Power-on Hours 0x01 0x018 6 16244838966 --- Logical Sectors Written 0x01 0x020 6 71380612 --- Number of Write Commands 0x01 0x028 6 10890799906 --- Logical Sectors Read 0x01 0x030 6 81995655 --- Number of Read Commands 0x01 0x038 6 2687192448 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10831 --- Spindle Motor Power-on Hours 0x03 0x010 4 4284 --- Head Flying Hours 0x03 0x018 4 25147 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 375 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 27 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2949165 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 31 --- Average Short Term Temperature 0x05 0x018 1 34 --- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 22 --- Lowest Average Short Term Temperature 0x05 0x040 1 36 --- Highest Average Long Term Temperature 0x05 0x048 1 25 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 24514 --- Number of Hardware Resets 0x06 0x010 4 18604 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 48220 Vendor specific /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: Patriot Burst Serial Number: -- Firmware Version: SBFM61.3 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 8 15:03:08 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 17467 12 Power_Cycle_Count -O--C- 100 100 000 - 2746 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/326 173 MaxAvgErase_Ct -O--C- 100 100 000 - 147 (Average 146) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 666 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 CRC_Error_Count PO-R-- 100 100 050 - 605 231 SSD_Life_Left PO--C- 100 100 000 - 95 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 27045 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 597 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 597 [84] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 10 e4 36 af 00 00 bf e0 00 Error: ICRC, ABRT 272 sectors at LBA = 0xe436af0000bf = 250923515379903 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 01 10 e4 36 af 00 00 bf e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT Error 596 [83] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 bf 00 00 bf e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0xbf0000bf = 3204448447 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 01 10 e4 36 af 00 00 bf e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT c8 00 00 10 10 00 00 3f 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 10 10 00 00 3f 00 00 3f e0 00 00:00:00.000 READ DMA Error 595 [82] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 3f 00 00 3f e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0x3f00003f = 1056964671 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 3f 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 10 10 00 00 3f 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 01 10 00 00 40 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 01 01 e4 36 ae 00 00 40 e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT Error 594 [81] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 3f 00 00 3f e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0x3f00003f = 1056964671 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 3f 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 01 10 00 00 40 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 01 01 e4 36 ae 00 00 40 e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT Error 593 [80] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 10 00 00 40 00 00 3f e0 00 Error: ICRC, ABRT 272 sectors at LBA = 0x4000003f = 1073741887 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 01 10 00 00 40 00 00 3f e0 00 00:00:00.000 READ DMA c8 00 00 01 01 e4 36 ae 00 00 40 e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT Error 592 [79] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 bf 00 00 bf e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0xbf0000bf = 3204448447 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 01 10 e4 36 af 00 00 bf e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT Error 591 [78] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 bf 00 00 bf e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0xbf0000bf = 3204448447 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 01 10 e4 36 af 00 00 bf e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT Error 590 [77] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 10 10 00 00 bf 00 00 bf e0 00 Error: ICRC, ABRT 4112 sectors at LBA = 0xbf0000bf = 3204448447 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 10 10 00 00 bf 00 00 bf e0 00 00:00:00.000 READ DMA c8 00 00 01 10 e4 36 af 00 00 bf e0 00 00:00:00.000 READ DMA 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 ae 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 37 e4 36 af 40 00 00:00:00.000 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16395 - # 2 Short offline Completed without error 00% 15271 - # 3 Short offline Completed without error 00% 15269 - # 4 Short offline Completed without error 00% 13838 - # 5 Short offline Completed without error 00% 13822 - # 6 Short offline Completed without error 00% 13808 - # 7 Short offline Completed without error 00% 11092 - # 8 Short offline Completed without error 00% 11075 - # 9 Short offline Completed without error 00% 11052 - #10 Short offline Completed without error 00% 11034 - #11 Short offline Completed without error 00% 11018 - #12 Short offline Completed without error 00% 11006 - #13 Short offline Completed without error 00% 10989 - #14 Short offline Completed without error 00% 10987 - #15 Short offline Completed without error 00% 10970 - #16 Short offline Completed without error 00% 10958 - #17 Short offline Completed without error 00% 10950 - #18 Short offline Completed without error 00% 10930 - #19 Extended offline Completed without error 00% 10914 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2746 --- Lifetime Power-On Resets 0x01 0x010 4 17467 --- Power-on Hours 0x01 0x018 6 56718562730 --- Logical Sectors Written 0x01 0x028 6 25244876243 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 19607 --- Number of Hardware Resets 0x06 0x018 4 605 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 4 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 15 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Intenso SSD Sata III Serial Number: -- Firmware Version: S0222A0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 8 15:03:08 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 6867 12 Power_Cycle_Count -O--CK 100 100 050 - 1042 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute PO--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 8 164 Unknown_Attribute -O--CK 100 100 050 - 115688 165 Unknown_Attribute -O--CK 100 100 050 - 238 166 Unknown_Attribute -O--CK 100 100 050 - 217 167 Unknown_Attribute -O--CK 100 100 050 - 234 168 Unknown_Attribute -O--CK 100 100 050 - 7000 169 Unknown_Attribute -O--CK 100 100 050 - 97 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 234 194 Temperature_Celsius -O---K 100 100 050 - 0 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 2852 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written ----CK 100 100 050 - 150637 242 Total_LBAs_Read ----CK 100 100 050 - 89814 245 Unknown_Attribute -O--CK 100 100 050 - 81819 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6696 - # 2 Short offline Completed without error 00% 5696 - # 3 Short offline Completed without error 00% 5694 - # 4 Short offline Completed without error 00% 4083 - # 5 Short offline Completed without error 00% 4068 - # 6 Short offline Completed without error 00% 4045 - # 7 Short offline Completed without error 00% 4028 - # 8 Short offline Completed without error 00% 4013 - # 9 Short offline Completed without error 00% 4002 - #10 Short offline Completed without error 00% 3986 - #11 Short offline Completed without error 00% 3986 - #12 Short offline Completed without error 00% 3969 - #13 Short offline Completed without error 00% 3959 - #14 Short offline Completed without error 00% 3952 - #15 Short offline Completed without error 00% 3934 - #16 Extended offline Completed without error 00% 3919 - #17 Short offline Completed without error 00% 3913 - #18 Short offline Completed without error 00% 3896 - #19 Short offline Completed without error 00% 3873 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1042 --- Lifetime Power-On Resets 0x01 0x010 4 6867 --- Power-on Hours 0x01 0x018 6 1282260618 --- Logical Sectors Written 0x01 0x020 6 0 --- Number of Write Commands 0x01 0x028 6 1591148278 --- Logical Sectors Read 0x01 0x030 6 1295 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 14 Device-to-host register FISes sent due to a COMRESET /dev/nvd0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDC WDS500G2B0C-00PXH0 Serial Number: -- Firmware Version: 211210WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Tue Nov 8 15:03:08 2022 EET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W 2.10W - 0 0 0 0 0 0 1 + 2.40W 1.60W - 0 0 0 0 0 0 2 + 1.90W 1.50W - 0 0 0 0 0 0 3 - 0.0250W - - 3 3 3 3 3900 11000 4 - 0.0050W - - 4 4 4 4 5000 39000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 38 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 20% Data Units Read: 37,395,705 [19.1 TB] Data Units Written: 79,607,474 [40.7 TB] Host Read Commands: 336,434,790 Host Write Commands: 650,863,273 Controller Busy Time: 2,084 Power Cycles: 1,452 Power On Hours: 6,621 Unsafe Shutdowns: 220 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged