/dev/ada0 smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD5003ABYZ-011FA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01S03 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.5/5706 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 8 20:49:26 2025 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 83) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 137 135 021 - 4141 4 Start_Stop_Count -O--CK 100 100 000 - 39 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 044 044 000 - 41371 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 39 192 Power-Off_Retract_Count -O--CK 200 200 000 - 26 193 Load_Cycle_Count -O--CK 200 200 000 - 134 194 Temperature_Celsius -O---K 112 096 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 41333 - # 2 Short offline Completed without error 00% 30 - # 3 Short offline Completed without error 00% 28 - # 4 Short offline Completed without error 00% 0 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/31 Celsius Lifetime Min/Max Temperature: 19/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (143) Index Estimated Time Temperature Celsius 144 2025-08-08 12:52 32 ************* ... ..( 24 skipped). .. ************* 169 2025-08-08 13:17 32 ************* 170 2025-08-08 13:18 31 ************ ... ..( 12 skipped). .. ************ 183 2025-08-08 13:31 31 ************ 184 2025-08-08 13:32 32 ************* ... ..( 7 skipped). .. ************* 192 2025-08-08 13:40 32 ************* 193 2025-08-08 13:41 31 ************ ... ..( 4 skipped). .. ************ 198 2025-08-08 13:46 31 ************ 199 2025-08-08 13:47 32 ************* ... ..( 27 skipped). .. ************* 227 2025-08-08 14:15 32 ************* 228 2025-08-08 14:16 31 ************ ... ..( 92 skipped). .. ************ 321 2025-08-08 15:49 31 ************ 322 2025-08-08 15:50 32 ************* ... ..( 15 skipped). .. ************* 338 2025-08-08 16:06 32 ************* 339 2025-08-08 16:07 31 ************ ... ..( 7 skipped). .. ************ 347 2025-08-08 16:15 31 ************ 348 2025-08-08 16:16 32 ************* ... ..( 19 skipped). .. ************* 368 2025-08-08 16:36 32 ************* 369 2025-08-08 16:37 31 ************ ... ..( 13 skipped). .. ************ 383 2025-08-08 16:51 31 ************ 384 2025-08-08 16:52 30 *********** ... ..( 20 skipped). .. *********** 405 2025-08-08 17:13 30 *********** 406 2025-08-08 17:14 31 ************ ... ..( 18 skipped). .. ************ 425 2025-08-08 17:33 31 ************ 426 2025-08-08 17:34 30 *********** 427 2025-08-08 17:35 ? - 428 2025-08-08 17:36 31 ************ 429 2025-08-08 17:37 30 *********** ... ..( 12 skipped). .. *********** 442 2025-08-08 17:50 30 *********** 443 2025-08-08 17:51 31 ************ ... ..( 18 skipped). .. ************ 462 2025-08-08 18:10 31 ************ 463 2025-08-08 18:11 30 *********** ... ..( 15 skipped). .. *********** 1 2025-08-08 18:27 30 *********** 2 2025-08-08 18:28 31 ************ ... ..( 26 skipped). .. ************ 29 2025-08-08 18:55 31 ************ 30 2025-08-08 18:56 30 *********** ... ..( 35 skipped). .. *********** 66 2025-08-08 19:32 30 *********** 67 2025-08-08 19:33 31 ************ ... ..( 13 skipped). .. ************ 81 2025-08-08 19:47 31 ************ 82 2025-08-08 19:48 32 ************* ... ..( 60 skipped). .. ************* 143 2025-08-08 20:49 32 ************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7945 Vendor specific