/dev/sd0 smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.1 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: JMicron/Maxiotek based SSDs Device Model: NT-512 Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: H190313 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Apr 22 21:32:07 2022 +10 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5446 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 580 167 Unknown_JMF_Attribute 0x0022 100 100 000 Old_age Always - 0 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 169 Unknown_JMF_Attribute 0x0013 094 094 010 Pre-fail Always - 28311579 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 173 Erase_Count 0x0012 200 200 000 Old_age Always - 2 59 21 175 Bad_Cluster_Table_Count 0x0022 100 100 010 Old_age Always - 0 180 Unknown_JMF_Attribute 0x0033 100 100 000 Pre-fail Always - 7200 187 Unknown_JMF_Attribute 0x0032 100 000 000 Old_age Always - 0 192 Unexpect_Power_Loss_Ct 0x0012 100 100 000 Old_age Always - 73 194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 10/50) 206 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 2 207 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 59 208 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 21 209 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 1230 210 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 1247 211 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 1131 231 Unknown_JMF_Attribute 0x0023 100 100 005 Pre-fail Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 13969770765 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 38767938557 245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.