/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Mobile Device Model: WDC WD10JPLX-00MBPT0 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: 01.01H01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 3 10:24:40 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 171) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 161 161 040 - 97 3 Spin_Up_Time POS--- 120 120 033 - 2 4 Start_Stop_Count -O--C- 100 100 000 - 46 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 040 - 34 9 Power_On_Hours -O--C- 001 001 000 - 43500 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 46 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 24 193 Load_Cycle_Count -O--C- 100 100 000 - 606 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 21/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 43491 - # 2 Short offline Completed without error 00% 43467 - # 3 Extended offline Completed without error 00% 43448 - # 4 Short offline Completed without error 00% 43443 - # 5 Short offline Completed without error 00% 43419 - # 6 Short offline Completed without error 00% 43395 - # 7 Short offline Completed without error 00% 43371 - # 8 Short offline Completed without error 00% 43347 - # 9 Short offline Completed without error 00% 43323 - #10 Short offline Completed without error 00% 43299 - #11 Extended offline Completed without error 00% 43280 - #12 Short offline Completed without error 00% 43275 - #13 Short offline Completed without error 00% 43252 - #14 Short offline Completed without error 00% 43228 - #15 Short offline Completed without error 00% 43204 - #16 Short offline Completed without error 00% 43180 - #17 Short offline Completed without error 00% 43156 - #18 Short offline Completed without error 00% 43132 - #19 Extended offline Completed without error 00% 43112 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 27/39 Celsius Lifetime Min/Max Temperature: 21/49 Celsius Specified Max Operating Temperature: 37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (88) Index Estimated Time Temperature Celsius 89 2023-07-03 08:17 33 ************** ... ..( 24 skipped). .. ************** 114 2023-07-03 08:42 33 ************** 115 2023-07-03 08:43 34 *************** 116 2023-07-03 08:44 33 ************** ... ..( 35 skipped). .. ************** 24 2023-07-03 09:20 33 ************** 25 2023-07-03 09:21 34 *************** ... ..( 31 skipped). .. *************** 57 2023-07-03 09:53 34 *************** 58 2023-07-03 09:54 33 ************** 59 2023-07-03 09:55 34 *************** 60 2023-07-03 09:56 33 ************** 61 2023-07-03 09:57 34 *************** ... ..( 2 skipped). .. *************** 64 2023-07-03 10:00 34 *************** 65 2023-07-03 10:01 33 ************** 66 2023-07-03 10:02 34 *************** 67 2023-07-03 10:03 34 *************** 68 2023-07-03 10:04 33 ************** 69 2023-07-03 10:05 34 *************** 70 2023-07-03 10:06 34 *************** 71 2023-07-03 10:07 33 ************** 72 2023-07-03 10:08 34 *************** ... ..( 3 skipped). .. *************** 76 2023-07-03 10:12 34 *************** 77 2023-07-03 10:13 33 ************** 78 2023-07-03 10:14 34 *************** 79 2023-07-03 10:15 33 ************** 80 2023-07-03 10:16 34 *************** 81 2023-07-03 10:17 34 *************** 82 2023-07-03 10:18 34 *************** 83 2023-07-03 10:19 33 ************** 84 2023-07-03 10:20 34 *************** 85 2023-07-03 10:21 34 *************** 86 2023-07-03 10:22 34 *************** 87 2023-07-03 10:23 33 ************** 88 2023-07-03 10:24 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS