[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz (3400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16426057728 (15665 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPE Server > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6e2cc000-0x6e2cc01e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPE Server> [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x3020-0x303f mem 0x80600000-0x806fffff,0x80704000-0x80707fff at device 0.0 numa-domain 0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V1-b2836-p0 eTrack 0x80000835 [...] ix0: Error 2 setting up SR-IOV [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x3000-0x301f mem 0x80500000-0x805fffff,0x80700000-0x80703fff at device 0.1 numa-domain 0 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V1-b2836-p0 eTrack 0x80000835 [...] ix1: Error 2 setting up SR-IOV [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x80800000-0x8080ffff at device 20.0 numa-domain 0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x80810000-0x80811fff,0x80814000-0x808140ff,0x80813000-0x808137ff at device 23.0 numa-domain 0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] igb0: <Intel(R) I350 (Copper)> port 0x2060-0x207f mem 0x80300000-0x803fffff,0x8040c000-0x8040ffff at device 0.0 numa-domain 0 on pci3 [...] igb0: EEPROM V1.63-0 Option ROM V1-b2839-p0 eTrack 0x8000108f [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x2040-0x205f mem 0x80200000-0x802fffff,0x80408000-0x8040bfff at device 0.1 numa-domain 0 on pci3 [...] igb1: EEPROM V1.63-0 Option ROM V1-b2839-p0 eTrack 0x8000108f [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> port 0x2020-0x203f mem 0x80100000-0x801fffff,0x80404000-0x80407fff at device 0.2 numa-domain 0 on pci3 [...] igb2: EEPROM V1.63-0 Option ROM V1-b2839-p0 eTrack 0x8000108f [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> port 0x2000-0x201f mem 0x80000000-0x800fffff,0x80400000-0x80403fff at device 0.3 numa-domain 0 on pci3 [...] igb3: EEPROM V1.63-0 Option ROM V1-b2839-p0 eTrack 0x8000108f [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] vgapci0: <VGA-compatible display> mem 0x84000000-0x84ffffff,0x85b98000-0x85b9bfff,0x85000000-0x857fffff at device 0.1 numa-domain 0 on pci4 [...] vgapci0: Boot video device [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0x85b9c000-0x85b9c0ff at device 0.4 numa-domain 0 on pci4 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.1 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.2 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.3 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 27bc00002a00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 27c200002a00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 27c300002a00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 27bc00002a00 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1704009545 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <(0x103c) EHCI root HUB> at usbus1 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <(0x103c) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000DM010-2EP102 CC46> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Mobile Connect Mobile Connect (0x2001:0xa401) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Mobile Connect Mobile Connect (0x2001:0xa401) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Mobile Connect Mobile Connect (0x2001:0xa401) [...] ugen0.2: <Mobile Connect Mobile Connect> at usbus0 [...] umass0 numa-domain 0 on uhub0 [...] umass0: <Mobile Connect Mobile Connect, class 0/0, rev 2.00/2.32, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4005 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: < SD Storage 0000> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: ILLEGAL REQUEST, Invalid command operation code [...] da0: quirks=0x2<NO_6_BYTE> [...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 1 [...] cd0: < Mass Storage 0000> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: ILLEGAL REQUEST, Invalid command operation code [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.3: <vendor 0x0424 product 0x2660> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 2> on usbus0 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 1 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <iLO Virtual Keyboard> at usbus1 [...] ukbd0 numa-domain 0 on uhub1 [...] ukbd0: <iLO Virtual Keyboard, class 0/0, rev 2.00/0.02, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] uhub_explore: illegal enable change, port 1