[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko [...] Module mmc/mmcsd failed to register: 17 [...] CPU: AMD FX(tm)-8320 Eight-Core Processor (3511.80-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16511361024 (15746 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 1 6 7 4 5 3 2 [...] Timecounter "TSC-low" frequency 1755900991 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xfea40000-0xfea5ffff,0xfea20000-0xfea3ffff irq 47 at device 0.0 on pci3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd01fffff,0xfe900000-0xfe93ffff irq 32 at device 0.0 on pci4 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfe960000-0xfe963fff irq 33 at device 0.1 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfe800000-0xfe8001ff irq 20 at device 0.0 on pci7 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 21 at device 0.0 on pci8 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus5 on xhci0 [...] usbus5: 5.0Gbps Super Speed USB v3.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe600000-0xfe607fff irq 22 at device 0.0 on pci9 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus6 on xhci1 [...] usbus6: 5.0Gbps Super Speed USB v3.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd0304000-0xd0304fff,0xd0300000-0xd0303fff irq 23 at device 0.0 on pci10 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x48000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0 [...] usbus7 on ohci3 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0 [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci2 [...] usbus8: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm9: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen5.1: <0x1b21 XHCI root HUB> at usbus5 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen6.1: <0x1b21 XHCI root HUB> at usbus6 [...] ugen8.1: <ATI EHCI root HUB> at usbus8 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: CAM [...] uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SA400S37480G SBFKK1B3> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] uhub2: 2 ports with 2 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x04C2 0xEF). [...] [drm] register mmio base: 0xFE900000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] probing gen 2 caps for device 1002:5a1f = 33ed02/0 [...] [drm] probing mlw for device 1002:67df = 440903 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] ATOM BIOS: 115-C940PI0-100 [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] ugen6.2: <Microsoft Corporation Controller> at usbus6 [...] usbhid0 on uhub1 [...] usbhid0: <Microsoft Corporation Controller, rev 2.00/1.10, addr 1> on usbus6 [...] hidbus0: <HID bus> on usbhid0 [...] xb360gp0: <XBox 360 Gamepad> on hidbus0 [...] ugen5.2: <Logitech Gaming Mouse G502> at usbus5 [...] usbhid1 on uhub5 [...] usbhid1: <Logitech Gaming Mouse G502, class 0/0, rev 2.00/3.02, addr 1> on usbus5 [...] hidbus1: <HID bus> on usbhid1 [...] hidraw0: <Microsoft Corporation Controller Raw HID Device> on hidbus0 [...] hms0: <Logitech Gaming Mouse G502> on hidbus1 [...] hms0: 16 buttons and [XYWH] coordinates ID=0 [...] hidraw1: <Logitech Gaming Mouse G502 Raw HID Device> on hidbus1 [...] usbhid2 on uhub5 [...] usbhid2: <Logitech Gaming Mouse G502, class 0/0, rev 2.00/3.02, addr 1> on usbus5 [...] hidbus2: <HID bus> on usbhid2 [...] hkbd0 on hidbus2 [...] hcons0: <Logitech Gaming Mouse G502 Consumer Control> on hidbus2 [...] hsctrl0: <Logitech Gaming Mouse G502 System Control> on hidbus2 [...] hidraw2: <Logitech Gaming Mouse G502 Raw HID Device> on hidbus2 [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mc.bin [...] drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [...] drmn0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Detected VRAM RAM=4096M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 8316084 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 4096M of VRAM memory ready [...] [drm] amdgpu: 4096M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD6 [...] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD4 [...] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] DVI-D-1 [...] [drm] HPD5 [...] [drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] Connector 3: [...] [drm] DVI-D-2 [...] [drm] HPD3 [...] [drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f [...] [drm] Encoders: [...] [drm] DFP4: INTERNAL_UNIPHY [...] uhub3: 4 ports with 4 removable, self powered [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_pfp_2.bin [...] uhub8: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_me_2.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_ce_2.bin [...] [drm] Chained IB support enabled! [...] ugen0.2: <Primax Kensington Eagle Trackball> at usbus0 [...] usbhid3 on uhub4 [...] usbhid3: <Primax Kensington Eagle Trackball, class 0/0, rev 2.00/6.00, addr 2> on usbus0 [...] hidbus3: <HID bus> on usbhid3 [...] hms1: <Primax Kensington Eagle Trackball Mouse> on hidbus3 [...] hms1: 3 buttons and [XYWH] coordinates ID=0 [...] hidraw3: <Primax Kensington Eagle Trackball Raw HID Device> on hidbus3 [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_rlc.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec_2.bin [...] ugen0.3: <DuckyChannel International Co., Ltd. Ducky Keyboard> at usbus0 [...] usbhid4 on uhub4 [...] usbhid4: <DuckyChannel International Co., Ltd. Ducky Keyboard, class 0/0, rev 2.00/1.10, addr 3> on usbus0 [...] hidbus4: <HID bus> on usbhid4 [...] hkbd1 on hidbus4 [...] hidraw4: <DuckyChannel International Co., Ltd. Ducky Keyboard Raw HID Device> on hidbus4 [...] usbhid5 on uhub4 [...] usbhid5: <CY04034801320105> on usbus0 [...] hidbus5: <HID bus> on usbhid5 [...] hidraw5: <DuckyChannel International Co., Ltd. Ducky Keyboard Raw HID Device> on hidbus5 [...] usbhid6 on uhub4 [...] usbhid6: <DuckyChannel International Co., Ltd. Ducky Keyboard, class 0/0, rev 2.00/1.10, addr 3> on usbus0 [...] hidbus6: <HID bus> on usbhid6 [...] hsctrl1: <DuckyChannel International Co., Ltd. Ducky Keyboard System Control> on hidbus6 [...] hcons1: <DuckyChannel International Co., Ltd. Ducky Keyboard Consumer Control> on hidbus6 [...] hms2: <DuckyChannel International Co., Ltd. Ducky Keyboard Mouse> on hidbus6 [...] hms2: 8 buttons and [XYWH] coordinates ID=3 [...] hkbd2 on hidbus6 [...] hidraw6: <DuckyChannel International Co., Ltd. Ducky Keyboard Raw HID Device> on hidbus6 [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec2_2.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma1.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_uvd.bin [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_vce.bin [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_k_smc.bin [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] [drm] fb mappable at 0xC0568000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0568000 vbase=0xfffff800c0568000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] i_size_write unimplemented [...] [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] em0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 55456 (VirtualBox), jid 0, uid 1001: exited on signal 6 [...] pid 81129 (VirtualBox), jid 0, uid 1001: exited on signal 6 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] ugen6.2: <Microsoft Corporation Controller> at usbus6 (disconnected) [...] usbhid0: at uhub1, port 3, addr 1 (disconnected) [...] hidraw0: detached [...] xb360gp0: detached [...] hidbus0: detached [...] usbhid0: detached [...] em0: promiscuous mode enabled [...] em0: promiscuous mode disabled [...] Limiting closed port RST response from 292 to 200 packets/sec [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] Limiting closed port RST response from 216 to 200 packets/sec [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 [...] vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0