[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(vbefb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.43-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 6442450944 (6144 MB) [...] avail memory = 6018682880 (5739 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ACRSYS ACRPRDCT> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ACRSYS ACRPRDCT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd0000000-0xd0ffffff,0xa0000000-0xafffffff,0xb0000000-0xb1ffffff irq 16 at device 0.0 on pci1 [...] vgapci1: <VGA-compatible display> port 0x3000-0x303f mem 0xd1400000-0xd17fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci1: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xd1b0a000-0xd1b0a3ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xd1b00000-0xd1b03fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xd1830000-0xd183ffff,0xd1840000-0xd184ffff irq 16 at device 0.0 on pci2 [...] bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] sdhci_pci0: <Broadcom BCM577xx SDXC/MMC Card Reader> mem 0xd1800000-0xd180ffff irq 17 at device 0.1 on pci2 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Wireless-N 1030> mem 0xd1a00000-0xd1a01fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci4 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus1: waiting for BIOS to give up control [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xd1b09000-0xd1b093ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x3098-0x309f,0x30bc-0x30bf,0x3090-0x3097,0x30b8-0x30bb,0x3060-0x307f mem 0xd1b08000-0xd1b087ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1247166621 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Onboard Analog Mic)> at nid 27 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ugen1.1: <(0x1033) XHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WDS120G2G0A-00JH30 UE220400> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD3200BPVT-80JJ5T0 01.01A01> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 305245MB (625142448 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: no FAT signature found. [...] uhub2: 4 ports with 4 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Force (0x0781:0x557d) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Force (0x0781:0x557d) [...] ugen1.2: <SanDisk Cruzer Force> at usbus1 [...] umass0 on uhub2 [...] umass0: <SanDisk Cruzer Force, class 0/0, rev 2.10/1.00, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <SanDisk Cruzer Force 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 30024MB (61489152 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: MSDOSFS: ada1: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] uhub3: 6 ports with 6 removable, self powered [...] random: unblocking device. [...] GEOM_LABEL[1]: Label for provider ada1p1 is gpt/home. [...] GEOM_LABEL[1]: Label for provider ada1p1 is gptid/HASH_C9E-B1C0-C432-7E2E-E4FE25DA79CE. [...] GEOM_LABEL[1]: MSDOSFS: ada1p1: no FAT signature found. [...] uhub4: 6 ports with 6 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: da0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label home(gpt/home) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_C9E-B1C0-C432-7E2E-E4FE25DA79CE(gptid/HASH_C9E-B1C0-C432-7E2E-E4FE25DA79CE) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on ventoy/IMAGE. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGE is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGE: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: da0s1: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: da0s2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0s2 is msdosfs/VTOYEFI. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp1 is gptid/HASH_0CB-825D-E841-C347-7ECF560BB5AA. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is gptid/HASH_CCC-2B38-9DFA-22F7-EAA2791E1639. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(msdosfs/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ugen2.3: <COMPANY 2.4G Device> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <COMPANY 2.4G Device, class 0/0, rev 2.00/1.26, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] ugen0.3: <vendor 0x8086 product 0x0189> at usbus0 [...] GEOM_LABEL[1]: Label HASH_0CB-825D-E841-C347-7ECF560BB5AA(gptid/HASH_0CB-825D-E841-C347-7ECF560BB5AA) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_CCC-2B38-9DFA-22F7-EAA2791E1639(gptid/HASH_CCC-2B38-9DFA-22F7-EAA2791E1639) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] Root mount waiting for: usbus0 [...] ugen0.4: <AABC41GB1 1.3M HD WebCam> at usbus0 [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel Cougar Point SMBus controller> port 0x3040-0x305f mem 0xd1b06000-0xd1b060ff irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.PCI0.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.PCI0.WMI1.WQXM: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] drmn1: <drmn> on vgapci1 [...] vgapci1: child drmn1 requested pci_enable_io [...] vgapci1: child drmn1 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x97a00000, size 0x8000000 [...] lkpi_iic0: <LinuxKPI I2C> on drmn1 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn1 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn1 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn1 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn1 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drmn1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drmn1 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] iic6: detached [...] iicbus6: detached [...] lkpi_iic6: detached [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic6: <LinuxKPI I2C> on drm4 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] [drm] Initialized i915 1.6.0 20200917 for drmn1 on minor 0 [...] VT: Replacing driver "vbefb" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] pbase=0xc0000000 vbase=0xfffff800c0000000 [...] name=drmn1 flags=0x0 stride=5504 bpp=32 [...] end FB_INFO [...] acpi_video1: <ACPI video extension> on vgapci1 [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] ums0 on uhub3 [...] ums0: <COMPANY 2.4G Device, class 0/0, rev 2.00/1.26, addr 3> on usbus2 [...] ums0: 8 buttons and [XYZ] coordinates ID=1 [...] ubt0 on uhub4 [...] ubt0: <vendor 0x8086 product 0x0189, class 224/1, rev 2.00/69.19, addr 3> on usbus0