[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p6 df578562304(HEAD) TRUENAS amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1200 [...] CPU: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz (3408.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66512588800 (63431 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1704085638 Hz quality 1000 [...] random: entropy device external interface [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] padlock0: No ACE support. [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] mps0: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xdf4c0000-0xdf4c3fff,0xdf480000-0xdf4bffff irq 16 at device 0.0 on pci1 [...] mps0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf538000-0xdf5380ff,0xdf537000-0xdf5377ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xdf300000-0xdf303fff irq 16 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci1: <JMicron JMB58x AHCI SATA controller> port 0xd200-0xd27f,0xd180-0xd1ff,0xd100-0xd17f,0xd080-0xd0ff,0xd000-0xd07f mem 0xdf210000-0xdf211fff irq 18 at device 0.0 on pci5 [...] ahci1: AHCI v1.31 with 5 6Gbps ports, Port Multiplier supported with FBS [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf100000-0xdf107fff irq 16 at device 0.0 on pci6 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme1: <Generic NVMe Device> mem 0xdf000000-0xdf003fff irq 16 at device 0.0 on pci7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd07ff pnpid ORM0000 on isa0 [...] superio0: <Nuvoton NCT6793> at port 0x2e-0x2f on isa0 [...] wbwd0: <Nuvoton NCT6793 (0xd1/0x21) Watchdog Timer> at WDT ldn 0x08 on superio0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: 4 ports with 4 removable, self powered [...] nvd0: <KINGSTON SA2000M8500G> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] nvd1: <KINGSTON SA2000M8500G> NVMe namespace [...] nvd1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:freenas-boot/ROOT/12.0-U4.1 []... [...] Root mount waiting for: CAM usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 [...] mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x804b [...] mps0: Sleeping 3 seconds after SATA ID error to wait for spinup [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ses0 at mps0 bus 0 scbus0 target 23 lun 0 [...] ses0: <IBM-ESXS SAS EXP BP 634A> Fixed Enclosure Services SPC-2 SCSI device [...] ses0: 600.000MB/s transfers [...] ses0: SES Device [...] ses1 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SA400S37480G SBFKK1B3> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] ses1: ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 [...] ada1: <KINGSTON SA400S37480G SBFK61E1> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 457862MB (937703088 512 byte sectors) [...] ada2 at ahcich5 bus 0 scbus6 target 0 lun 0 [...] ada2: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 2861588MB (5860533168 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] ses1: ada1 in 'Slot 01', SATA Slot: scbus2 target 0 [...] ses1: ada2 in 'Slot 05', SATA Slot: scbus6 target 0 [...] ada3 at ahcich6 bus 0 scbus8 target 0 lun 0 [...] ada3: <TOSHIBA THNSNX032GTNT M.2 2242 32GB XTXAN106> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 30533MB (62533296 512 byte sectors) [...] ada4 at ahcich7 bus 0 scbus9 target 0 lun 0 [...] ada4: <TOSHIBA THNSNX032GTNT XTXAN106> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 30533MB (62533296 512 byte sectors) [...] da2 at mps0 bus 0 scbus0 target 8 lun 0 [...] da2: <ATA Hitachi HUS72403 A5F0> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 600.000MB/s transfers [...] da2: Command Queueing enabled [...] da2: 2861588MB (5860533168 512 byte sectors) [...] da3 at mps0 bus 0 scbus0 target 9 lun 0 [...] da3: <ATA Hitachi HUS72403 A5F0> Fixed Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 600.000MB/s transfers [...] da3: Command Queueing enabled [...] da3: 2861588MB (5860533168 512 byte sectors) [...] da4 at mps0 bus 0 scbus0 target 10 lun 0 [...] da4: <ATA WDC WD3003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da4: Serial Number... [...] da4: 600.000MB/s transfers [...] da4: Command Queueing enabled [...] da4: 2861588MB (5860533168 512 byte sectors) [...] da5 at mps0 bus 0 scbus0 target 11 lun 0 [...] da5: <ATA WDC WD3001FFSX-6 0A81> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 600.000MB/s transfers [...] da5: Command Queueing enabled [...] da5: 2861588MB (5860533168 512 byte sectors) [...] da12 at mps0 bus 0 scbus0 target 35 lun 0 [...] da12: <ATA WDC WD3000F9YZ-0 1A02> Fixed Direct Access SPC-4 SCSI device [...] da12: Serial Number... [...] da12: 600.000MB/s transfers [...] da12: Command Queueing enabled [...] da12: 2861588MB (5860533168 512 byte sectors) [...] da9 at mps0 bus 0 scbus0 target 15 lun 0 [...] da9: <ATA WDC WD30PURX-64P 0A80> Fixed Direct Access SPC-4 SCSI device [...] da9: Serial Number... [...] da9: 600.000MB/s transfers [...] da9: Command Queueing enabled [...] da9: 2861588MB (5860533168 512 byte sectors) [...] da9: quirks=0x8<4K> [...] da15 at mps0 bus 0 scbus0 target 48 lun 0 [...] da15: <ATA WDC WD3000F9YZ-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da15: Serial Number... [...] da15: 600.000MB/s transfers [...] da15: Command Queueing enabled [...] da15: 2861588MB (5860533168 512 byte sectors) [...] da14 at mps0 bus 0 scbus0 target 47 lun 0 [...] da14: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SPC-4 SCSI device [...] da14: Serial Number... [...] da14: 600.000MB/s transfers [...] da14: Command Queueing enabled [...] da14: 2861588MB (5860533168 512 byte sectors) [...] da14: quirks=0x8<4K> [...] da13 at mps0 bus 0 scbus0 target 46 lun 0 [...] da13: <ATA WDC WD3000F9YZ-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da13: Serial Number... [...] da13: 600.000MB/s transfers [...] da13: Command Queueing enabled [...] da13: 2861588MB (5860533168 512 byte sectors) [...] da8 at mps0 bus 0 scbus0 target 14 lun 0 [...] da8: <ATA WDC WD30EZRX-00M 0A80> Fixed Direct Access SPC-4 SCSI device [...] da8: Serial Number... [...] da8: 600.000MB/s transfers [...] da8: Command Queueing enabled [...] da8: 2861588MB (5860533168 512 byte sectors) [...] da8: quirks=0x8<4K> [...] da7 at mps0 bus 0 scbus0 target 13 lun 0 [...] da7: <ATA WDC WD30EZRX-00M 0A80> Fixed Direct Access SPC-4 SCSI device [...] da7: Serial Number... [...] da7: 600.000MB/s transfers [...] da7: Command Queueing enabled [...] da7: 2861588MB (5860533168 512 byte sectors) [...] da7: quirks=0x8<4K> [...] da0 at mps0 bus 0 scbus0 target 4 lun 0 [...] da0: <ATA WDC WD5000LPLX-0 1A04> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 476940MB (976773168 512 byte sectors) [...] da1 at mps0 bus 0 scbus0 target 5 lun 0 [...] da1: <ATA WDC WD5000LPLX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 476940MB (976773168 512 byte sectors) [...] da11 at mps0 bus 0 scbus0 target 31 lun 0 [...] da11: <ATA KINGSTON SV300S3 BBF0> Fixed Direct Access SPC-4 SCSI device [...] da11: Serial Number... [...] da11: 600.000MB/s transfers [...] da11: Command Queueing enabled [...] da11: 114473MB (234441648 512 byte sectors) [...] da10 at mps0 bus 0 scbus0 target 30 lun 0 [...] da10: <ATA KINGSTON SV300S3 BBF0> Fixed Direct Access SPC-4 SCSI device [...] da10: Serial Number... [...] da10: 600.000MB/s transfers [...] da10: Command Queueing enabled [...] da10: 114473MB (234441648 512 byte sectors) [...] da6 at mps0 bus 0 scbus0 target 12 lun 0 [...] da6: <ATA ST3000DM008-2DM1 CC26> Fixed Direct Access SPC-4 SCSI device [...] da6: Serial Number... [...] da6: 600.000MB/s transfers [...] da6: Command Queueing enabled [...] da6: 2861588MB (5860533168 512 byte sectors) [...] da6: quirks=0x8<4K> [...] da16 at mps0 bus 0 scbus0 target 49 lun 0 [...] da16: <ATA ST3000DM001-1ER1 CC25> Fixed Direct Access SPC-4 SCSI device [...] da16: Serial Number... [...] da16: 600.000MB/s transfers [...] da16: Command Queueing enabled [...] da16: 2861588MB (5860533168 512 byte sectors) [...] da16: quirks=0x8<4K> [...] da17 at mps0 bus 0 scbus0 target 50 lun 0 [...] da17: <ATA ST3000DM001-1CH1 CC29> Fixed Direct Access SPC-4 SCSI device [...] da17: Serial Number... [...] da17: 600.000MB/s transfers [...] da17: Command Queueing enabled [...] da17: 2861588MB (5860533168 512 byte sectors) [...] da17: quirks=0x8<4K> [...] da18 at mps0 bus 0 scbus0 target 51 lun 0 [...] da18: <ATA TOSHIBA HDWD130 ACF0> Fixed Direct Access SPC-4 SCSI device [...] da18: Serial Number... [...] da18: 600.000MB/s transfers [...] da18: Command Queueing enabled [...] da18: 2861588MB (5860533168 512 byte sectors) [...] da19 at mps0 bus 0 scbus0 target 52 lun 0 [...] da19: <ATA TOSHIBA HDWD130 ACF0> Fixed Direct Access SPC-4 SCSI device [...] da19: Serial Number... [...] da19: 600.000MB/s transfers [...] da19: Command Queueing enabled [...] da19: 2861588MB (5860533168 512 byte sectors) [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] GEOM_MIRROR: Device mirror/swap0 launched (2/2). [...] GEOM_ELI: Device mirror/swap0.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: hardware [...] hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] CPU: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz (3408.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0x8c000000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1200 width=1920 depth=32 [...] cmsize=16 size=9216000 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] i915/kbl_dmc_ver1_04.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: i915/kbl_dmc_ver1_04.bin [...] drmn0: successfully loaded firmware image with mapped name: i915_kbl_dmc_ver1_04_bin [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] epair0a: Ethernet address: ... [...] epair0b: Ethernet address: ... [...] epair0a: link state changed to UP [...] epair0b: link state changed to UP [...] epair0a: changing name to 'vnet0.1' [...] em0: link state changed to DOWN [...] lo0: link state changed to UP [...] bridge0: Ethernet address: ... [...] em0: link state changed to UP [...] epair1a: Ethernet address: ... [...] epair1b: Ethernet address: ... [...] epair1a: link state changed to UP [...] epair1b: link state changed to UP [...] epair1a: changing name to 'vnet0.2' [...] epair1b: changing name to 'epair0b' [...] vnet0.2: promiscuous mode enabled [...] bridge0: link state changed to UP [...] lo0: link state changed to UP [...] epair2a: Ethernet address: ... [...] epair2b: Ethernet address: ... [...] epair2a: link state changed to UP [...] epair2b: link state changed to UP [...] epair2a: changing name to 'vnet0.3' [...] epair2b: changing name to 'epair0b' [...] em0: link state changed to DOWN [...] em0: promiscuous mode enabled [...] vnet0.3: promiscuous mode enabled [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] epair3a: Ethernet address: ... [...] epair3b: Ethernet address: ... [...] epair3a: link state changed to UP [...] epair3b: link state changed to UP [...] epair3a: changing name to 'vnet0.4' [...] epair3b: changing name to 'epair0b' [...] vnet0.4: promiscuous mode enabled [...] lo0: link state changed to UP [...] Limiting closed port RST response from 202 to 200 packets/sec [...] Limiting closed port RST response from 203 to 200 packets/sec [...] epair4a: Ethernet address: ... [...] epair4b: Ethernet address: ... [...] epair4a: link state changed to UP [...] epair4b: link state changed to UP [...] epair4a: changing name to 'vnet0.5' [...] epair4b: changing name to 'epair0b' [...] vnet0.5: promiscuous mode enabled [...] lo0: link state changed to UP [...] Limiting closed port RST response from 202 to 200 packets/sec [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on epair0b [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 1> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub2 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub2 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0 [...] ugen0.4: <Logitech USB Receiver> at usbus0 [...] ukbd1 on uhub2 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ums1 on uhub2 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid1 on uhub2 [...] uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) [...] uhub2: at uhub0, port 11, addr 1 (disconnected) [...] ugen0.3: <Logitech USB Receiver> at usbus0 (disconnected) [...] ukbd0: at uhub2, port 1, addr 2 (disconnected) [...] ukbd0: detached [...] ums0: at uhub2, port 1, addr 2 (disconnected) [...] ums0: detached [...] uhid0: at uhub2, port 1, addr 2 (disconnected) [...] uhid0: detached [...] ugen0.4: <Logitech USB Receiver> at usbus0 (disconnected) [...] ukbd1: at uhub2, port 4, addr 3 (disconnected) [...] ukbd1: detached [...] ums1: at uhub2, port 4, addr 3 (disconnected) [...] ums1: detached [...] uhid1: at uhub2, port 4, addr 3 (disconnected) [...] uhid1: detached [...] uhub2: detached [...] epair5a: Ethernet address: ... [...] epair5b: Ethernet address: ... [...] epair5a: link state changed to UP [...] epair5b: link state changed to UP [...] epair5a: changing name to 'vnet0.6' [...] epair5b: changing name to 'epair0b' [...] lo0: link state changed to UP