[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD FX(tm)-4350 Quad-Core Processor (4214.58-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8185233408 (7806 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 44 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x48000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe20b000-0xfe20b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 1 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe20a000-0xfe20afff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe209000-0xfe2090ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe208000-0xfe208fff irq 20 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe207000-0xfe2070ff irq 21 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xfe200000-0xfe203fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd000-0xd0ff mem 0xfe100000-0xfe1000ff irq 21 at device 6.0 on pci3 [...] miibus1: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe206000-0xfe206fff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe205000-0xfe205fff irq 22 at device 22.0 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe204000-0xfe2040ff irq 23 at device 22.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci2 [...] usbus6: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounter "TSC-low" frequency 2107193566 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub0 on usbus3 [...] uhub1 on usbus2 [...] uhub2 on usbus0 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus1 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub5 on usbus6 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] uhub6 on usbus5 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 [...] ada0 at ahcich5 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA MQ01ABD075 AX001C> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 715404MB (1465149168 512 byte sectors) [...] uhub4: 2 ports with 2 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 usbus3 usbus6 [...] uhub5: 4 ports with 4 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] WARNING: /mnt was not properly dismounted [...] ugen0.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.15, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] re0: link state changed to UP [...] rl0: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub2 [...] uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.15, addr 2> on usbus0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] re0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 80 1 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD FX(tm)-4350 Quad-Core Processor (4214.62-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8185233408 (7806 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 44 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x48000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe20b000-0xfe20b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 1 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe20a000-0xfe20afff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe209000-0xfe2090ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe208000-0xfe208fff irq 20 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe207000-0xfe2070ff irq 21 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xfe200000-0xfe203fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd000-0xd0ff mem 0xfe100000-0xfe1000ff irq 21 at device 6.0 on pci3 [...] miibus1: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe206000-0xfe206fff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe205000-0xfe205fff irq 22 at device 22.0 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe204000-0xfe2040ff irq 23 at device 22.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci2 [...] usbus6: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounter "TSC-low" frequency 2107193600 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub1 on usbus2 [...] uhub2 on usbus0 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub4 on usbus6 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] uhub5 on usbus3 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub6 on usbus5 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 [...] ada0 at ahcich5 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA MQ01ABD075 AX001C> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 715404MB (1465149168 512 byte sectors) [...] uhub3: 2 ports with 2 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 usbus3 usbus6 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] ugen0.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.15, addr 2> on usbus0 [...] kbd2 at ukbd0