[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: AMD Phenom(tm) II X4 965 Processor (3415.50-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16616476672 (15846 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <042713 APIC1118> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfbf40-0xfbf5e [...] smbios0: Version: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <042713 XSDT1118> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xfeaf8000-0xfeafbfff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbfff000-0xfbffffff,0xfbff8000-0xfbffbfff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfebf8000-0xfebfffff irq 19 at device 0.0 on pci3 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfcfffc00-0xfcffffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffe000-0xfcffefff irq 16 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffd000-0xfcffdfff irq 16 at device 18.1 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff800-0xfcfff8ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffc000-0xfcffcfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffb000-0xfcffbfff irq 18 at device 19.1 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff400-0xfcfff4ff irq 19 at device 19.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfcff4000-0xfcff7fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffa000-0xfcffafff irq 18 at device 20.5 on pci0 [...] usbus7 on ohci4 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1707666323 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub2 on usbus6 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ZFS filesystem version: 5 [...] uhub3 on usbus7 [...] ZFS storage pool version: features support (5000) [...] uhub4 on usbus5 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] uhub5 on usbus1 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub6 on usbus3 [...] uhub7 on usbus4 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub5: 3 ports with 3 removable, self powered [...] uhub7: 3 ports with 3 removable, self powered [...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] ugen0.3: <vendor 0x03f0 product 0x2514> at usbus0 [...] uhub8 on uhub0 [...] uhub8: <vendor 0x03f0 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub8: MTT enabled [...] Root mount waiting for: usbus0 CAM usbus3 usbus6 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SV300S37A120G 60AABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG HD103SI 1AG01118> ATA-7 SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <KINGSTON SHFS37A120G 60AABBF0> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 114473MB (234441648 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <WDC WD10EZEX-22MFCA0 01.01A01> ACS-3 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] cd0 at ata1 bus 0 scbus5 target 0 lun 0 [...] cd0: <ASUS DRW-24B5ST 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub8: 4 ports with 4 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus3 usbus6 [...] ugen4.2: <Microsoft Microsoft Classic IntelliMouse> at usbus4 [...] ugen1.2: <vendor 0x0b38 USB-compliant keyboard> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <vendor 0x0b38 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] nvidia0: <NVIDIA GeForce GT 1030> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 570.124.04 Tue Feb 25 03:39:05 UTC 2025 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] re0: link state changed to DOWN [...] lo0: link state changed to UP [...] run0 on uhub0 [...] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address XXX [...] run0: [HT] Enabling 802.11n [...] ums0 on uhub7 [...] ums0: <Microsoft Microsoft Classic IntelliMouse, class 0/0, rev 2.00/0.40, addr 2> on usbus4 [...] ums1 on uhub5 [...] ums1: <vendor 0x0b38 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ums0: 5 buttons and [XYZ] coordinates ID=26 [...] ums1: 0 buttons and [XYZ] coordinates ID=5 [...] uhid0 on uhub7 [...] uhid0: <Microsoft Microsoft Classic IntelliMouse, class 0/0, rev 2.00/0.40, addr 2> on usbus4 [...] wlan0: Ethernet address: ... [...] run0: firmware RT3071 ver. 0.33 loaded [...] wlan0: link state changed to UP