[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 b531d3958f5(stable/21.1)-dirty: Tue Apr 20 11:00:08 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] module_register: cannot register pci/bxe from kernel; already loaded from if_bxe.ko [...] Module pci/bxe failed to register: 17 [...] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (3534.62-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16483278848 (15719 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 5 4 7 6 2 3 [...] Timecounter "TSC-low" frequency 1767307806 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <_ASUS_ Notebook> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> mem 0xf7600000-0xf761ffff irq 16 at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd020-0xd03f mem 0xf75a0000-0xf75bffff,0xf7580000-0xf759ffff,0xf75c4000-0xf75c7fff irq 17 at device 0.0 on pci3 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7540000-0xf755ffff,0xf7520000-0xf753ffff,0xf75c0000-0xf75c3fff irq 18 at device 0.1 on pci3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <PCI-PCI bridge> irq 18 at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc020-0xc03f mem 0xf74a0000-0xf74bffff,0xf7480000-0xf749ffff,0xf74c4000-0xf74c7fff irq 18 at device 0.0 on pci4 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xf7440000-0xf745ffff,0xf7420000-0xf743ffff,0xf74c0000-0xf74c3fff irq 19 at device 0.1 on pci4 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] bxe0: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe7800000-0xe7ffffff,0xe7000000-0xe77fffff,0xe8070000-0xe807ffff irq 17 at device 0.0 on pci5 [...] bxe0: PCI BAR0 [10] memory allocated: 0xe7800000-0xe7ffffff (8388608) -> 0xfffff800e7800000 [...] bxe0: PCI BAR2 [18] memory allocated: 0xe7000000-0xe77fffff (8388608) -> 0xfffff800e7000000 [...] bxe0: PCI BAR4 [20] memory allocated: 0xe8070000-0xe807ffff (65536) -> 0xfffff800e8070000 [...] bxe0: Found 10GBase-T media. [...] bxe0: IFMEDIA flags : 20 [...] bxe0: Using defaults for TSO: 65518/35/2048 [...] bxe0: Ethernet address: ... [...] bxe1: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe6800000-0xe6ffffff,0xe6000000-0xe67fffff,0xe8060000-0xe806ffff irq 18 at device 0.1 on pci5 [...] bxe1: PCI BAR0 [10] memory allocated: 0xe6800000-0xe6ffffff (8388608) -> 0xfffff800e6800000 [...] bxe1: PCI BAR2 [18] memory allocated: 0xe6000000-0xe67fffff (8388608) -> 0xfffff800e6000000 [...] bxe1: PCI BAR4 [20] memory allocated: 0xe8060000-0xe806ffff (65536) -> 0xfffff800e8060000 [...] bxe1: Found 10GBase-T media. [...] bxe1: IFMEDIA flags : 20 [...] bxe1: Using defaults for TSO: 65518/35/2048 [...] bxe1: Ethernet address: ... [...] bxe2: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe5800000-0xe5ffffff,0xe5000000-0xe57fffff,0xe8050000-0xe805ffff irq 18 at device 0.2 on pci5 [...] bxe2: PCI BAR0 [10] memory allocated: 0xe5800000-0xe5ffffff (8388608) -> 0xfffff800e5800000 [...] bxe2: PCI BAR2 [18] memory allocated: 0xe5000000-0xe57fffff (8388608) -> 0xfffff800e5000000 [...] bxe2: PCI BAR4 [20] memory allocated: 0xe8050000-0xe805ffff (65536) -> 0xfffff800e8050000 [...] bxe2: Found 10GBase-T media. [...] bxe2: IFMEDIA flags : 20 [...] bxe2: Using defaults for TSO: 65518/35/2048 [...] bxe2: Ethernet address: ... [...] bxe3: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe4800000-0xe4ffffff,0xe4000000-0xe47fffff,0xe8040000-0xe804ffff irq 19 at device 0.3 on pci5 [...] bxe3: PCI BAR0 [10] memory allocated: 0xe4800000-0xe4ffffff (8388608) -> 0xfffff800e4800000 [...] bxe3: PCI BAR2 [18] memory allocated: 0xe4000000-0xe47fffff (8388608) -> 0xfffff800e4000000 [...] bxe3: PCI BAR4 [20] memory allocated: 0xe8040000-0xe804ffff (65536) -> 0xfffff800e8040000 [...] bxe3: Found 10GBase-T media. [...] bxe3: IFMEDIA flags : 20 [...] bxe3: Using defaults for TSO: 65518/35/2048 [...] bxe3: Ethernet address: ... [...] bxe4: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe3800000-0xe3ffffff,0xe3000000-0xe37fffff,0xe8030000-0xe803ffff irq 19 at device 0.4 on pci5 [...] bxe4: PCI BAR0 [10] memory allocated: 0xe3800000-0xe3ffffff (8388608) -> 0xfffff800e3800000 [...] bxe4: PCI BAR2 [18] memory allocated: 0xe3000000-0xe37fffff (8388608) -> 0xfffff800e3000000 [...] bxe4: PCI BAR4 [20] memory allocated: 0xe8030000-0xe803ffff (65536) -> 0xfffff800e8030000 [...] bxe4: Found 10GBase-T media. [...] bxe4: IFMEDIA flags : 20 [...] bxe4: Using defaults for TSO: 65518/35/2048 [...] bxe4: Ethernet address: ... [...] bxe5: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe2800000-0xe2ffffff,0xe2000000-0xe27fffff,0xe8020000-0xe802ffff irq 16 at device 0.5 on pci5 [...] bxe5: PCI BAR0 [10] memory allocated: 0xe2800000-0xe2ffffff (8388608) -> 0xfffff800e2800000 [...] bxe5: PCI BAR2 [18] memory allocated: 0xe2000000-0xe27fffff (8388608) -> 0xfffff800e2000000 [...] bxe5: PCI BAR4 [20] memory allocated: 0xe8020000-0xe802ffff (65536) -> 0xfffff800e8020000 [...] bxe5: Found 10GBase-T media. [...] bxe5: IFMEDIA flags : 20 [...] bxe5: Using defaults for TSO: 65518/35/2048 [...] bxe5: Ethernet address: ... [...] bxe6: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe1800000-0xe1ffffff,0xe1000000-0xe17fffff,0xe8010000-0xe801ffff irq 16 at device 0.6 on pci5 [...] bxe6: PCI BAR0 [10] memory allocated: 0xe1800000-0xe1ffffff (8388608) -> 0xfffff800e1800000 [...] bxe6: PCI BAR2 [18] memory allocated: 0xe1000000-0xe17fffff (8388608) -> 0xfffff800e1000000 [...] bxe6: PCI BAR4 [20] memory allocated: 0xe8010000-0xe801ffff (65536) -> 0xfffff800e8010000 [...] bxe6: Found 10GBase-T media. [...] bxe6: IFMEDIA flags : 20 [...] bxe6: Using defaults for TSO: 65518/35/2048 [...] bxe6: Ethernet address: ... [...] bxe7: <QLogic NetXtreme II BCM57810 MF 10GbE (B0) BXE v:1.78.91 [...] > mem 0xe0800000-0xe0ffffff,0xe0000000-0xe07fffff,0xe8000000-0xe800ffff irq 17 at device 0.7 on pci5 [...] bxe7: PCI BAR0 [10] memory allocated: 0xe0800000-0xe0ffffff (8388608) -> 0xfffff800e0800000 [...] bxe7: PCI BAR2 [18] memory allocated: 0xe0000000-0xe07fffff (8388608) -> 0xfffff800e0000000 [...] bxe7: PCI BAR4 [20] memory allocated: 0xe8000000-0xe800ffff (65536) -> 0xfffff800e8000000 [...] bxe7: Found 10GBase-T media. [...] bxe7: IFMEDIA flags : 20 [...] bxe7: Using defaults for TSO: 65518/35/2048 [...] bxe7: Ethernet address: ... [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c39000-0xf7c39fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c38000-0xf7c383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7c30000-0xf7c33fff irq 22 at device 27.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7a00000-0xf7a07fff irq 18 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xf7900000-0xf79001ff irq 19 at device 0.0 on pci8 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci9 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ath0: <Atheros AR9485> mem 0xf7800000-0xf787ffff irq 18 at device 0.0 on pci11 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 1281.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib12: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7700000-0xf7707fff irq 19 at device 0.0 on pci12 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c37000-0xf7c373ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c36000-0xf7c367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff,0xd1800-0xd27ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <OCZ-ARC100 1.01> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm5: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub6 on uhub1 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen1.3: <Generic USB Keyboard> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <Generic USB Keyboard, class 0/0, rev 1.10/2.05, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen4.3: <vendor 0x15c2 product 0xffdc> at usbus4 [...] ugen4.4: <Generic Mass Storage Device> at usbus4 [...] umass0 on uhub6 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:8:0: Attached to scbus8 [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus8 target 0 lun 1 [...] da1: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus8 target 0 lun 2 [...] da2: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus8 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] uhid0 on uhub6 [...] uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus4 [...] ums0 on uhub5 [...] ums0: <Generic USB Keyboard, class 0/0, rev 1.10/2.05, addr 3> on usbus1 [...] ums0: 0 buttons and [XYZ] coordinates ID=3 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] bxe1: link state changed to DOWN [...] bxe1: [...] bxe1: link state changed to UP [...] NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit [...] bxe0: link state changed to DOWN [...] bxe0: [...] bxe0: link state changed to UP [...] NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] 726.605932 [1130] generic_netmap_attach Emulated adapter for bxe0 created (prev was NULL) [...] 726.605948 [1035] generic_netmap_dtor Emulated netmap adapter for bxe0 destroyed [...] 726.607400 [1130] generic_netmap_attach Emulated adapter for bxe0 created (prev was NULL) [...] 726.653035 [ 320] generic_netmap_register Emulated adapter for bxe0 activated