[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RC2 #0 releng/13.0-n244684-13c22f74953: Fri Mar 12 04:05:19 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz (2712.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16494907392 (15730 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1356052364 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000048 [4350] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xee000000-0xeeffffff,0xd0000000-0xdfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xef330000-0xef33ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xef350000-0xef351fff,0xef354000-0xef3540ff,0xef353000-0xef3537ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] rtsx0: <2.0c Realtek RTS525A PCI MMC/SD Card Reader> mem 0xef200000-0xef200fff at device 0.0 on pci1 [...] rtsx0: pci_read_config() error - reg: 0xeeffffaa [...] rtsx0: Card absent [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xef000000-0xef003fff at device 0.0 on pci3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xef348000-0xef34bfff,0xef320000-0xef32ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xef300000-0xef31ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] battery0: critically low charge! [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <PCIe SSD> NVMe namespace [...] nvd0: 1953514MB (4000797360 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Internal Analog)> at nid 20 and 18 on hdaa0 [...] pcm1: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <PixArt Gaming Mouse> at usbus0 [...] ukbd1 on uhub0 [...] ukbd1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.4: <CNFGH19N465410091AE2 IntegratedWebcamHD> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <vendor 0x8087 product 0x0a2b> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <Broadcom Corp 5880> at usbus0 [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xef359000-0xef359fff at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xef358000-0xef358fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0xef357000-0xef357fff at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xef352000-0xef3520ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xef100000-0xef101fff at device 0.0 on pci2 [...] iwm0: hw rev 0x230, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [...] [drm] Got stolen memory base 0xcd800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: Failed to program MOCS registers; expect performance issues. [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xd0000000 vbase=0xfffff800d0000000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] ums1 on uhub0 [...] ums1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] iichid0: <DLL07A8:00 044E:120B I2C HID device> at addr 0x2c irq 51 on iicbus1 [...] hidbus0: <HID bus> on iichid0 [...] hms0: <DLL07A8:00 044E:120B Mouse> on hidbus0 [...] hms0: 3 buttons and [XYWH] coordinates ID=1 [...] hkbd0: <DLL07A8:00 044E:120B Keyboard> on hidbus0 [...] kbd4 at hkbd0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] bridge1: Ethernet address: ... [...] wlan0: promiscuous mode enabled [...] bridge1: link state changed to UP [...] tap1: Ethernet address: ... [...] tap1: promiscuous mode enabled [...] tap1: link state changed to UP [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] sonewconn: pcb 0xfffff801a4a15800 (XXX@XXX): Listen queue overflow: 1 already in queue awaiting acceptance (1 occurrences) [...] sonewconn: pcb 0xfffff800506d4200 (local:/home/XXXXXXXXXXXXXXXXXXXXXXXXX): Listen queue overflow: 1 already in queue awaiting acceptance (1 occurrences) [...] Limiting closed port RST response from 295 to 200 packets/sec [...] Limiting closed port RST response from 230 to 200 packets/sec [...] Limiting closed port RST response from 297 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=565463 end=565464) time 994 us, min 1073, max 1079, scanline start 1071, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=797581 end=797582) time 990 us, min 1073, max 1079, scanline start 1061, end 1100 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=1251581 end=1251582) time 1000 us, min 1073, max 1079, scanline start 1057, end 1083 [...] Limiting closed port RST response from 281 to 200 packets/sec [...] Limiting closed port RST response from 362 to 200 packets/sec [...] Limiting closed port RST response from 340 to 200 packets/sec [...] Limiting closed port RST response from 202 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1886145 end=1886146) time 0 us, min 1073, max 1079, scanline start 1061, end 1086 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2089656 end=2089657) time 1000 us, min 1073, max 1079, scanline start 1037, end 1082 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2319083 end=2319084) time 1002 us, min 1073, max 1079, scanline start 1044, end 1089 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2447795 end=2447796) time 995 us, min 1073, max 1079, scanline start 1072, end 1085 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2480180 end=2480181) time 0 us, min 1073, max 1079, scanline start 1068, end 1084 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2517557 end=2517558) time 1023 us, min 1073, max 1079, scanline start 1056, end 1099 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=2537700 end=2537701) time 0 us, min 1073, max 1079, scanline start 1070, end 1085 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2538703 end=2538704) time 0 us, min 1073, max 1079, scanline start 1042, end 1091 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2584857 end=2584858) time 0 us, min 1073, max 1079, scanline start 1060, end 1098 [...] Limiting closed port RST response from 223 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2603946 end=2603947) time 0 us, min 1073, max 1079, scanline start 1067, end 1098 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=2610048 end=2610049) time 0 us, min 1073, max 1079, scanline start 1066, end 1068 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=2662567 end=2662568) time 0 us, min 1073, max 1079, scanline start 1071, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2680024 end=2680025) time 0 us, min 1073, max 1079, scanline start 1072, end 1084 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2716862 end=2716863) time 0 us, min 1073, max 1079, scanline start 1061, end 1086 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=2745993 end=2745994) time 0 us, min 1073, max 1079, scanline start 1067, end 1096 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2776681 end=2776682) time 0 us, min 1073, max 1079, scanline start 1072, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2783833 end=2783834) time 0 us, min 1073, max 1079, scanline start 1069, end 1084 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2856727 end=2856728) time 0 us, min 1073, max 1079, scanline start 1072, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=2935572 end=2935573) time 0 us, min 1073, max 1079, scanline start 1063, end 1095 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=2986511 end=2986512) time 0 us, min 1073, max 1079, scanline start 1072, end 1086 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=3167986 end=3167987) time 0 us, min 1073, max 1079, scanline start 1072, end 1086 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=3180744 end=3180745) time 0 us, min 1073, max 1079, scanline start 1071, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=5257735 end=5257736) time 0 us, min 1073, max 1079, scanline start 1049, end 1082 [...] Limiting closed port RST response from 237 to 200 packets/sec [...] Limiting closed port RST response from 218 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=5595006 end=5595007) time 0 us, min 1073, max 1079, scanline start 1072, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=5841543 end=5841544) time 998 us, min 1073, max 1079, scanline start 1058, end 1100 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=5865759 end=5865760) time 0 us, min 1073, max 1079, scanline start 1068, end 1092 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=6079951 end=6079952) time 0 us, min 1073, max 1079, scanline start 1069, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=6233272 end=6233273) time 997 us, min 1073, max 1079, scanline start 1035, end 1090 [...] ugen0.7: <Hewlett-Packard HP LaserJet P2055dn> at usbus0 [...] ulpt0 on uhub0 [...] ulpt0: <Printer> on usbus0 [...] ulpt0: using bi-directional mode [...] ng_ubt: HCI command 0xfc05 timed out [...] ugen0.3: <PixArt Gaming Mouse> at usbus0 (disconnected) [...] ums1: at uhub0, port 2, addr 2 (disconnected) [...] ums1: detached [...] ukbd1: at uhub0, port 2, addr 2 (disconnected) [...] ukbd1: detached [...] ugen0.7: <Hewlett-Packard HP LaserJet P2055dn> at usbus0 (disconnected) [...] ulpt0: at uhub0, port 3, addr 6 (disconnected) [...] ulpt0: detached [...] ugen0.3: <PixArt Gaming Mouse> at usbus0 [...] ums1 on uhub0 [...] ums1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 7> on usbus0 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] ukbd1 on uhub0 [...] ukbd1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 7> on usbus0 [...] kbd3 at ukbd1 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=6304925 end=6304926) time 2987 us, min 1073, max 1079, scanline start 918, end 1105 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=6310234 end=6310235) time 998 us, min 1073, max 1079, scanline start 1048, end 1103 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=6317520 end=6317521) time 994 us, min 1073, max 1079, scanline start 1069, end 1097 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=6463427 end=6463428) time 2999 us, min 1073, max 1079, scanline start 906, end 1107 [...] swap_pager: out of swap space [...] swp_pager_getswapspace(17): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(17): failed [...] iwm0: device timeout [...] iwm0: dumping device error log [...] iwm0: errlog not found, skipping [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(2): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(4): failed [...] swp_pager_getswapspace(4): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(4): failed [...] swp_pager_getswapspace(5): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(11): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(12): failed [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(20): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(7): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(13): failed [...] swp_pager_getswapspace(13): failed [...] pid 24122 (chrome), jid 0, uid 1001, was killed: out of swap space [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7016849 end=7016850) time 0 us, min 1073, max 1079, scanline start 1072, end 1083 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=7139604 end=7139605) time 999 us, min 1073, max 1079, scanline start 1061, end 1092 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7142269 end=7142270) time 0 us, min 1073, max 1079, scanline start 1057, end 1101 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=7407898 end=7407899) time 0 us, min 1073, max 1079, scanline start 1063, end 1104 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7604122 end=7604123) time 0 us, min 1073, max 1079, scanline start 1072, end 1094 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7631245 end=7631246) time 0 us, min 1073, max 1079, scanline start 1063, end 1086 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=7685736 end=7685737) time 0 us, min 1073, max 1079, scanline start 1072, end 1079 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7723015 end=7723016) time 0 us, min 1073, max 1079, scanline start 1059, end 1087 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=7740029 end=7740030) time 0 us, min 1073, max 1079, scanline start 1069, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=7838995 end=7838996) time 0 us, min 1073, max 1079, scanline start 1072, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=7847441 end=7847442) time 0 us, min 1073, max 1079, scanline start 1071, end 1082 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=8084855 end=8084856) time 0 us, min 1073, max 1079, scanline start 1070, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=8169501 end=8169502) time 0 us, min 1073, max 1079, scanline start 1072, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=8357453 end=8357454) time 0 us, min 1073, max 1079, scanline start 1038, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=8376525 end=8376526) time 0 us, min 1073, max 1079, scanline start 1068, end 1080 [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(32): failed [...] swp_pager_getswapspace(20): failed [...] swp_pager_getswapspace(23): failed [...] swp_pager_getswapspace(2): failed [...] swp_pager_getswapspace(3): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(11): failed [...] swp_pager_getswapspace(12): failed [...] swp_pager_getswapspace(17): failed [...] swp_pager_getswapspace(17): failed [...] swp_pager_getswapspace(3): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(13): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(18): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(11): failed [...] swp_pager_getswapspace(14): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(6): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(19): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(1): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(16): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(17): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(1): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(3): failed [...] swp_pager_getswapspace(31): failed [...] swp_pager_getswapspace(11): failed [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=10409508 end=10409509) time 6999 us, min 1073, max 1079, scanline start 833, end 200 [...] swap_pager: out of swap space [...] swp_pager_getswapspace(16): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(5): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(3): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(2): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(7): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(18): failed [...] swp_pager_getswapspace(1): failed [...] swp_pager_getswapspace(3): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(5): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(2): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(2): failed [...] swp_pager_getswapspace(2): failed [...] swp_pager_getswapspace(12): failed [...] swp_pager_getswapspace(17): failed [...] swp_pager_getswapspace(4): failed [...] swp_pager_getswapspace(5): failed [...] swap_pager: out of swap space [...] swp_pager_getswapspace(29): failed [...] swp_pager_getswapspace(1): failed [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=11015068 end=11015069) time 993 us, min 1073, max 1079, scanline start 1072, end 1093 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=11018275 end=11018276) time 0 us, min 1073, max 1079, scanline start 1071, end 1088 [...] swp_pager_getswapspace(29): failed [...] swp_pager_getswapspace(2): failed [...] swp_pager_getswapspace(9): failed [...] Limiting closed port RST response from 241 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=11981812 end=11981813) time 996 us, min 1073, max 1079, scanline start 1053, end 1088 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=12003003 end=12003004) time 0 us, min 1073, max 1079, scanline start 1070, end 1083 [...] Limiting closed port RST response from 236 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=12317477 end=12317478) time 0 us, min 1073, max 1079, scanline start 1068, end 1082 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=12650434 end=12650435) time 102 us, min 1073, max 1079, scanline start 1058, end 1091 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=13282392 end=13282393) time 995 us, min 1073, max 1079, scanline start 1054, end 1106 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=13297268 end=13297269) time 996 us, min 1073, max 1079, scanline start 1033, end 1084 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=13363649 end=13363650) time 0 us, min 1073, max 1079, scanline start 1065, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=15921339 end=15921340) time 18995 us, min 1073, max 1079, scanline start 684, end 840 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=16319315 end=16319316) time 0 us, min 1073, max 1079, scanline start 1063, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=17017705 end=17017706) time 0 us, min 1073, max 1079, scanline start 1072, end 1082 [...] Limiting closed port RST response from 357 to 200 packets/sec [...] Limiting closed port RST response from 219 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=22178593 end=22178594) time 0 us, min 1073, max 1079, scanline start 1063, end 1088 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=22200707 end=22200708) time 998 us, min 1073, max 1079, scanline start 1059, end 1101 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=22198315 end=22198316) time 0 us, min 1073, max 1079, scanline start 1071, end 1114 [...] pid 62977 (chrome), jid 0, uid 1001: exited on signal 5 [...] wlan0: link state changed to DOWN [...] tap1: link state changed to DOWN [...] bridge1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] All buffers synced. [...] Uptime: 4d7h16m1s [...] ukbd0: detached [...] ums0: detached [...] uhid0: detached [...] ums1: detached [...] ukbd1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz (2712.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16494907392 (15730 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1356062397 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000048 [4354] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xee000000-0xeeffffff,0xd0000000-0xdfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xef330000-0xef33ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xef350000-0xef351fff,0xef354000-0xef3540ff,0xef353000-0xef3537ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] rtsx0: <2.0c Realtek RTS525A PCI MMC/SD Card Reader> mem 0xef200000-0xef200fff at device 0.0 on pci1 [...] rtsx0: pci_read_config() error - reg: 0xeeffffaa [...] rtsx0: Card absent [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xef000000-0xef003fff at device 0.0 on pci3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xef348000-0xef34bfff,0xef320000-0xef32ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xef300000-0xef31ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] battery0: critically low charge! [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <PCIe SSD> NVMe namespace [...] nvd0: 1953514MB (4000797360 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Internal Analog)> at nid 20 and 18 on hdaa0 [...] pcm1: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <PixArt Gaming Mouse> at usbus0 [...] ukbd1 on uhub0 [...] ukbd1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.4: <CNFGH19N465410091AE2 IntegratedWebcamHD> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <vendor 0x8087 product 0x0a2b> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <Broadcom Corp 5880> at usbus0 [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xef359000-0xef359fff at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xef358000-0xef358fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0xef357000-0xef357fff at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xef352000-0xef3520ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xef100000-0xef101fff at device 0.0 on pci2 [...] iwm0: hw rev 0x230, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [...] [drm] Got stolen memory base 0xcd800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: Failed to program MOCS registers; expect performance issues. [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xd0000000 vbase=0xfffff800d0000000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] ums1 on uhub0 [...] ums1: <PixArt Gaming Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] iichid0: <DLL07A8:00 044E:120B I2C HID device> at addr 0x2c irq 51 on iicbus1 [...] hidbus0: <HID bus> on iichid0 [...] hms0: <DLL07A8:00 044E:120B Mouse> on hidbus0 [...] hms0: 3 buttons and [XYWH] coordinates ID=1 [...] hkbd0: <DLL07A8:00 044E:120B Keyboard> on hidbus0 [...] kbd4 at hkbd0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] bridge1: Ethernet address: ... [...] bridge1: link state changed to UP [...] wlan0: promiscuous mode enabled [...] tap1: Ethernet address: ... [...] tap1: promiscuous mode enabled [...] tap1: link state changed to UP [...] sonewconn: pcb 0xfffff802ad5fd500 (local:/home/XXXXXXXXXXXXXXXXXXXXXXXXX): Listen queue overflow: 1 already in queue awaiting acceptance (1 occurrences) [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] sonewconn: pcb 0xfffff80035e65600 (XXX@XXX): Listen queue overflow: 1 already in queue awaiting acceptance (1 occurrences) [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=37550 end=37551) time 1001 us, min 1073, max 1079, scanline start 1054, end 1085 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=60398 end=60399) time 1994 us, min 1073, max 1079, scanline start 1009, end 1101 [...] Limiting closed port RST response from 228 to 200 packets/sec [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=95401 end=95402) time 0 us, min 1073, max 1079, scanline start 1069, end 1088 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=284997 end=284998) time 995 us, min 1073, max 1079, scanline start 1055, end 1081 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=309245 end=309246) time 0 us, min 1073, max 1079, scanline start 1069, end 1083 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=336473 end=336474) time 0 us, min 1073, max 1079, scanline start 1064, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=392019 end=392020) time 0 us, min 1073, max 1079, scanline start 1069, end 1097 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=428841 end=428842) time 995 us, min 1073, max 1079, scanline start 1052, end 1083 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=503832 end=503833) time 991 us, min 1073, max 1079, scanline start 1062, end 1093 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=603825 end=603826) time 3997 us, min 1073, max 1079, scanline start 819, end 8 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=634166 end=634167) time 996 us, min 1073, max 1079, scanline start 1050, end 1083 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=808440 end=808441) time 0 us, min 1073, max 1079, scanline start 1053, end 1097 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=902132 end=902133) time 0 us, min 1073, max 1079, scanline start 1061, end 1085 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1208351 end=1208352) time 999 us, min 1073, max 1079, scanline start 1066, end 1093 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1297930 end=1297931) time 0 us, min 1073, max 1079, scanline start 1070, end 1082 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1404662 end=1404663) time 0 us, min 1073, max 1079, scanline start 1066, end 1087 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1493976 end=1493977) time 997 us, min 1073, max 1079, scanline start 1038, end 1093 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=1642411 end=1642412) time 997 us, min 1073, max 1079, scanline start 1023, end 16 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1664487 end=1664488) time 0 us, min 1073, max 1079, scanline start 1066, end 1080 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1721161 end=1721162) time 0 us, min 1073, max 1079, scanline start 1063, end 1106 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=1724158 end=1724159) time 0 us, min 1073, max 1079, scanline start 1071, end 1085 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=4095336 end=4095337) time 998 us, min 1073, max 1079, scanline start 1049, end 1104 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe B (start=4111163 end=4111164) time 0 us, min 1073, max 1079, scanline start 1072, end 1082 [...] [drm ERROR :intel_pipe_update_end] Atomic update failure on pipe A (start=4231405 end=4231406) time 3996 us, min 1073, max 1079, scanline start 1061, end 223