[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (1600.18-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8146186240 (7768 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] [1] ioapic0 <Version 2.0> irqs 0-114 [...] [1] Launching APs: 3 2 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] unknown: I/O range not supported [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81e11000-0x81e117ff irq 19 at device 19.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81e00000-0x81e0ffff irq 20 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81c00000-0x81cfffff,0x81d00000-0x81d03fff irq 16 at device 0.0 on pci1 [...] [1] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81900000-0x819fffff,0x81a00000-0x81a03fff irq 17 at device 0.0 on pci2 [...] [1] igc1: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0x81600000-0x816fffff,0x81700000-0x81703fff irq 18 at device 0.0 on pci3 [...] [1] igc2: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff irq 19 at device 0.0 on pci4 [...] [1] igc3: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1599948532 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] Trying to mount root from zfs:zroot/ROOT/default []... [...] [1] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE 128GB SSD V4.30.2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] uhub0: 13 ports with 13 removable, self powered [...] [2] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] [2] run0 on uhub0 [...] [2] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] [2] run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address XXX [...] [2] run0: [HT] Enabling 802.11n [...] [14] igc0: link state changed to UP [...] [14] igc1: link state changed to UP [...] [19] ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x81e10000-0x81e1001f irq 18 at device 31.3 on pci0 [...] [19] smbus0: <System Management Bus> on ichsmb0 [...] [23] lo0: link state changed to UP [...] [28] pflog0: permanently promiscuous mode enabled [...] [29] igc0: link state changed to DOWN [...] [29] igc1: link state changed to DOWN [...] [32] igc0: link state changed to UP [...] [33] igc1: link state changed to UP [...] [234] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] [270] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] [337] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [337] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [338] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] [342] All buffers synced. [...] [342] Uptime: 5m42s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (1600.18-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8146255872 (7768 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] [1] ioapic0 <Version 2.0> irqs 0-114 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] unknown: I/O range not supported [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81e11000-0x81e117ff irq 19 at device 19.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81e00000-0x81e0ffff irq 20 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81c00000-0x81cfffff,0x81d00000-0x81d03fff irq 16 at device 0.0 on pci1 [...] [1] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81900000-0x819fffff,0x81a00000-0x81a03fff irq 17 at device 0.0 on pci2 [...] [1] igc1: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0x81600000-0x816fffff,0x81700000-0x81703fff irq 18 at device 0.0 on pci3 [...] [1] igc2: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff irq 19 at device 0.0 on pci4 [...] [1] igc3: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1599949323 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] Trying to mount root from zfs:zroot/ROOT/default []... [...] [1] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE 128GB SSD V4.30.2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] uhub0: 13 ports with 13 removable, self powered [...] [2] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] [2] run0 on uhub0 [...] [2] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] [2] run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address XXX [...] [2] run0: [HT] Enabling 802.11n [...] [15] igc0: link state changed to UP [...] [15] igc1: link state changed to UP [...] [20] ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x81e10000-0x81e1001f irq 18 at device 31.3 on pci0 [...] [20] smbus0: <System Management Bus> on ichsmb0 [...] [24] igc0: link state changed to DOWN [...] [24] igc1: link state changed to DOWN [...] [28] igc1: link state changed to UP [...] [31] igc0: link state changed to UP [...] [32] lo0: link state changed to UP [...] [32] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] [38] pflog0: permanently promiscuous mode enabled [...] [38] igc0: link state changed to DOWN [...] [38] igc1: link state changed to DOWN [...] [41] igc0: link state changed to UP [...] [42] igc1: link state changed to UP [...] [204] igc1: link state changed to DOWN [...] [222] igc1: link state changed to UP [...] [226] igc1: link state changed to DOWN [...] [233] igc1: link state changed to UP [...] [644] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [644] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [644] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] [648] All buffers synced. [...] [649] Uptime: 10m49s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271676-ab2281de1853 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (1600.17-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8144404480 (7767 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] [1] ioapic0 <Version 2.0> irqs 0-114 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] unknown: I/O range not supported [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81e11000-0x81e117ff irq 19 at device 19.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81e00000-0x81e0ffff irq 20 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81c00000-0x81cfffff,0x81d00000-0x81d03fff irq 16 at device 0.0 on pci1 [...] [1] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81900000-0x819fffff,0x81a00000-0x81a03fff irq 17 at device 0.0 on pci2 [...] [1] igc1: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0x81600000-0x816fffff,0x81700000-0x81703fff irq 18 at device 0.0 on pci3 [...] [1] igc2: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff irq 19 at device 0.0 on pci4 [...] [1] igc3: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1599948488 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] Trying to mount root from zfs:zroot/ROOT/default []... [...] [1] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE 128GB SSD V4.30.2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] uhub0: 13 ports with 13 removable, self powered [...] [2] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] [2] run0 on uhub0 [...] [2] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] [2] run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address XXX [...] [2] run0: [HT] Enabling 802.11n