[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 9m39s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-STABLE #0 stable/13-e52aaa644: Mon Nov 7 12:28:29 CST 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1280x1024 [...] module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko [...] Module mmc/mmcsd failed to register: 17 [...] CPU: AMD Phenom(tm) II X6 1090T Processor (3210.85-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32226091008 (30733 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 5 1 4 2 3 [...] TCP_ratelimit: Is now initialized [...] TCP Hpts created 6 swi interrupt threads and bound 0 to cpus [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd01fffff,0xfea00000-0xfea3ffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe900000-0xfe9001ff irq 44 at device 0.0 on pci2 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfe800000-0xfe8001ff irq 46 at device 0.0 on pci3 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 48 at device 0.0 on pci4 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xb020-0xb03f mem 0xfe660000-0xfe67ffff,0xfe640000-0xfe65ffff irq 47 at device 0.0 on pci5 [...] em0: EEPROM V5.6-2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xb000-0xb01f mem 0xfe620000-0xfe63ffff,0xfe600000-0xfe61ffff irq 44 at device 0.1 on pci5 [...] em1: EEPROM V5.6-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] mpr0: <Avago Technologies (LSI) SAS3008> port 0xa000-0xa0ff mem 0xfe340000-0xfe34ffff,0xfe300000-0xfe33ffff irq 32 at device 0.0 on pci6 [...] mpr0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray> [...] pcib7: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe500000-0xfe507fff irq 22 at device 0.0 on pci10 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus6 on xhci1 [...] usbus6: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 23 at device 0.0 on pci11 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus7 on xhci2 [...] usbus7: 5.0Gbps Super Speed USB v3.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0 [...] usbus8 on ohci3 [...] usbus8: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0 [...] usbus9: EHCI version 1.0 [...] usbus9 on ehci2 [...] usbus9: 480Mbps High Speed USB v2.0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1605389303 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen7.1: <(0x1b21) XHCI root HUB> at usbus7 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen9.1: <ATI EHCI root HUB> at usbus9 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub0 on usbus3 [...] uhub1 on usbus1 [...] uhub2 on usbus9 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9 [...] uhub3 on usbus2 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub4 on usbus4 [...] uhub5 on usbus7 [...] uhub5: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 [...] ugen6.1: <(0x1b21) XHCI root HUB> at usbus6 [...] ugen8.1: <ATI OHCI root HUB> at usbus8 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub6 on usbus0 [...] uhub7 on usbus6 [...] uhub7: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 [...] uhub6: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub8 on usbus8 [...] uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8 [...] uhub9 on usbus5 [...] uhub9: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 3 [...] mpr0: At enclosure level 0 and connector name ( ) [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 2 [...] mpr0: At enclosure level 0 and connector name ( ) [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 0 [...] mpr0: At enclosure level 0 and connector name ( ) [...] pcm6: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 1 [...] mpr0: At enclosure level 0 and connector name ( ) [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000d> enclosureHandle<0x0001> slot 7 [...] mpr0: At enclosure level 0 and connector name ( ) [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000e> enclosureHandle<0x0001> slot 6 [...] mpr0: At enclosure level 0 and connector name ( ) [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000f> enclosureHandle<0x0001> slot 4 [...] pcm7: <Realtek ALC892 (Front Analog)>mpr0: At enclosure level 0 and connector name ( ) [...] at nid 27 and 25 on hdaa1 [...] mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0010> enclosureHandle<0x0001> slot 5 [...] mpr0: At enclosure level 0 and connector name ( ) [...] pcm8: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm9: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <TS8GSSD500 130411> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 7641MB (15649200 512 byte sectors) [...] da0 at mpr0 bus 0 scbus4 target 0 lun 0 [...] da0: <ATA WDC WD5003AZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 476940MB (976773168 512 byte sectors) [...] da4 at mpr0 bus 0 scbus4 target 4 lun 0 [...] da4: <ATA WDC WD5003AZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da4: Serial Number... [...] da4: 600.000MB/s transfers [...] da4: Command Queueing enabled [...] da4: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich5 bus 0 scbus6 target 0 lun 0 [...] cd0: <ATAPI iHAS124 E 4L06> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] da1 at mpr0 bus 0 scbus4 target 1 lun 0 [...] da1: <ATA WDC WD5003AZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 476940MB (976773168 512 byte sectors) [...] da3 at mpr0 bus 0 scbus4 target 3 lun 0 [...] da3: <ATA WDC WD5003AZEX-0 0A80> Fixed Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 600.000MB/s transfers [...] da3: Command Queueing enabled [...] da3: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <KINGSTON SV300S37A60G 521ABBF0> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 57241MB (117231408 512 byte sectors) [...] ada2 at ahcich4 bus 0 scbus5 target 0 lun 0 [...] ada2: <WDC WD5003AZEX-00MK2A0 01.01A01> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 476940MB (976773168 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] da5 at mpr0 bus 0 scbus4 target 5 lun 0 [...] da5: <ATA WDC WD5003AZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 600.000MB/s transfers [...] da5: Command Queueing enabled [...] da5: 476940MB (976773168 512 byte sectors) [...] da6 at mpr0 bus 0 scbus4 target 6 lun 0 [...] da6: <ATA WDC WD5003AZEX-0 0A80> Fixed Direct Access SPC-4 SCSI device [...] da6: Serial Number... [...] da6: 600.000MB/s transfers [...] da6: Command Queueing enabled [...] da6: 476940MB (976773168 512 byte sectors) [...] da7 at mpr0 bus 0 scbus4 target 7 lun 0 [...] da7: <ATA WDC WD5003AZEX-0 0A80> Fixed Direct Access SPC-4 SCSI device [...] da7: Serial Number... [...] da7: 600.000MB/s transfers [...] da7: Command Queueing enabled [...] da7: 476940MB (976773168 512 byte sectors) [...] da2 at mpr0 bus 0 scbus4 target 2 lun 0 [...] da2: <ATA WDC WD5003AZEX-0 0A80> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 600.000MB/s transfers [...] da2: Command Queueing enabled [...] da2: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub9: 2 ports with 2 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub8: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] GEOM: da5: the primary GPT table is corrupt or invalid. [...] GEOM: da5: using the secondary instead -- recovery strongly advised. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXX the primary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXX using the secondary instead -- recovery strongly advised. [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus2 usbus4 [...] uhub3: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] ugen3.2: <vendor 0x047d Kensington Expert Mouse> at usbus3 [...] ums0 on uhub0 [...] ums0: <vendor 0x047d Kensington Expert Mouse, class 0/0, rev 2.00/1.06, addr 2> on usbus3 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] Attempting to load tcp_bbr [...] tcp_bbr is now available [...] [drm] radeon kernel modesetting enabled. [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] em0: link state changed to UP [...] lo0: link state changed to UP